References
- C. I. DAVIS and J. E. KING: Mater. Sci. Technol., 1993, 9, 8.
- O. M. AKSELSEN, O. GRONG, and J. K. SOLBERG: Mater. Sci. Technol., 1987, 3, 649.
- S. SUZUKI, K. ARIMOCHI, J. FURUSAWA, K. BESSYO, and R. SOMEYA: in `8th international conference on off-shore mechanics and arctic engineering', 657; 1989, New York, American Society of Mechanical Engineers.
- C. THAULOW, A. P. PAAUW, A. GUNLEIKSRUD, and O. J. NAESS: Met. Constr., 1985, 17, 94R.
- R. E. DOLBY: Weld. J., 1979, 58, 225s.
- J. Y. KOO and A. OZEKCIN: in ‘Welding metallurgy of structural steels’ (ed. J. Y. Koo), 119; 1987, Warrendale, PA, TMS-AIME.
- Ø. GRONG and o. M. mcsnisEN: Met. Constr., 1986, 18, 557.
- M. R. KRISHNADEV, J. T. McGRATH, J. T. BOWKER, and S. DIONNE: in ‘Welding metallurgy of structural steels’ (ed. J. Y. Koo), 137; 1987, Warrendale, PA, TMS-AIME.
- H. G. PISARSKI and R. J. PARGETER: Met. Constr., 1984, 16, 412.
- B. C. KIM, S. LEE, N. J. Km, and D. Y. LEE: Metall. Trans. A, 1991, 22A, 139.
- P. BROZZO, M. CAPLTRRO, B. PERIPIMENO, and E. STAGNO: Prakt. Metallogr., 1992, 29, 414.
- P. BROZZO, M. CAPURRO, P. CTRILLO, M. G. IENCO, M. R. PINASCO, E. STAGNO, and G. ZUNINO: in Proc. Int. Conf. on ‘Materials development in rail, tire, wing, hull transportation’, Genoa, Italy, 1992, Associazione Italiana di Metallurgia, 335.
- P. BROZZO, M. CAPLTRRO, and E. STAGNO: Mater. Sci, Technol., 1994, 10, 334.
- C. OUCHI, T. OKITA, and S. VAMAMOTO: Trans. Iron Steel Inst. Jpn, 1982, 22, 608.
- M. PONTREMOLI, A. CERQUITELLA, D. COLLELUORI, M. PETRUCCI, and C. IANNONE: in Proc. 9th Int. Conf. on ‘Offshore mechanics and arctic engineering’, Houston, TX, USA, February 1990, ASME.
- H. CHINO and K. wADA: ‘Thermodynamical study on the deoxidation and precipitation of carbide and nitride’, Yawata Technical Report 251, Yawata, Japan, 1965, 5817.
- M. KODA, K. AMANO, Y. FUNAHASHI, C. SHIGA, and S. UEDA: Trans. Iron Steel Inst. Jpn, 1985, 25, 21.
- D. UWER, U. LOTTER, and H. BAUMGARDT: Schweissen Schneiden, 1989, 41, 170.
- J. M. GRAY and M. PONTREMOLI: in Proc. Int. Conf. on ‘Pipeline technology’, Rome, Italy, November 1987, Associazione Italiana di Metallurgia.
- P. BROZZO and G. BUZZICHELLI: in Proc. Conf. on ‘Analytical and experimental fracture mechanics’, Rome, Italy, June 1980, Italsider—Lehigh University, 45.
- D. COLLELUORI: Prakt. metallogr., 1983, 20, 546.
- F. S. Le PERA: Metallography, 1979, 12, 263.
- J. R. GRIFFITHS and D. R. J. OWEN: J. Mech. Phys. Solids, 1971, 19, 419.
- ‘Guide to the metallurgy of welding and weldability of low carbon micro-alloyed hot rolled steels’, International Institute of Welding, Abington, UK, May 1984.
- M. CAPURRO, P. BROZZO, and P. CIRILLO: Mater. Sci. Technol., 1997, 13, 645,
- P. BROZZO, G. BUZZICHELLI, A. MASCANZONI, and M. MIRABILE: Met. Sci., 1977, 11, 123,
- G. T. HAHN: Metall. Trans. A, 1984, 15A, 947.