References
- T. W. CLYNE and P. J. WITHERS: in ‘An introduction to metal matrix composites’, 294; 1995, Cambridge, Cambridge University Press.
- TechTrends: MMCs — technology and industrial applications', Innovation 128, Paris, France, 1990, 98–122.
- G. DURRANT and P. S. GRANT: Key Eng. Mater., 1995, 104-107, 115.
- P. A. KARNEZIS, G. DURRANT, B. CANTOR, and E. J. PALMIERE: Mater. Sc!. Technol., 1995, 11, 741–751.
- J. R. FRANKLIN and A. A. DAS: Br. Foundryman, 1984, 77, 150–158.
- ‘Product design and specifications for squeeze casting’, ELM International, MI, USA, 1994.
- G. A. CHADWICK and T. M. YUE: Met. Mater., 1989, 5, 6–12.
- Duralcan composite casting guidelines', Duralcan USA, San Diego, CA, USA, 1990.
- J. T. STALEY, S. E. AXTER, L. J. BARKER, J. H. HULL, R. B. LEHOLM, and P. C. witsoN: in ‘Metals handbook’, 9th edn., Vol. 4, 686; 1991, Materials Park, OH, ASM International.
- ‘Metals: mechanical testing; elevated and low temperature tests; metallography’, ASTM Standard E 8—M, in ‘Annual book of ASTM standards’, Vol. 3. 01, 81-100; 1994, Philadelphia, PA, ASTM.
- J. A. SEICHAR, G. J. ABBASCHIAN, and R. MEHRABIAN: Mater. Sci. Eng., 1979, 40, 105–110.
- D. L. ZHANG and B. CANTOR: Model. Simul. Mater. Sci. Eng., 1995, 3, 121–130.
- A. L. ICEARNEY: in ‘Metals handbook’, 10th edn., Vol. 2, 165; 1990, Materials Park, OH, ASM International.
- M. GALLERNEAULT, G. DURRANT, and B. CANTOR: University Of Oxford, UK, Personal communication, 1995.
- M. GALLERNEAULT, A DURRANT, and B. CANTOR: SCr. Metall. Mater., 1995, 32, 1553–1557.
- D. J. LLOYD: Int. Mater. Rev., 1994, 39, 1–23.
- E. L. ROOY: in Proc. 3rd Int. Conf. on ‘Aluminum alloys: their physical and mechanical properties (ICAA3)’, Trondheim, Norway, 1992, Norwegian Institute of Technology and Sintef Metall., 3–43.
- J. W. McCOY and F. E. WAWNER: in ‘Cast reinforced metal composites’, 237–242; 1988, Materials Park, OH, ASM.
- J. CAMPBELL: in ‘Castings’, 272; 1995, Oxford, Butterworth-Heineman.
- I. J. POLMEAR: in ‘Light alloys’, 2nd edn, 20; 1989, London, Edward Arnold.
- K. T. KASHYAP, S. MURALI, K. S. RAMAN, and K. S. S. MURTHY: Mater. Sci. Technol., 1993, 9, 189–203.
- C. Y. BARLOW: in Proc. 12th Rise Int. Symp. on Materials Science, `MMCs: processing, microstructure and properties', Rise National Laboratory, Denmark, 1991, 1–15.
- Z. WANG and R. J. ZHANG: Metall. Trans. A, 1991, 22, 1585–1593.
- M. A. BAYOUMI and M. SUERY: in ‘Proceedings of 6th international conference on composite materials (2nd ECCM)’, Vol. 2, 481–490; 1987, London, Elsevier.
- P. M. MUMMERY, B. DERBY, J. COOK, and J. H. TWEED: in Proc. 2nd European Conf. on ‘Advanced materials and processes’, Cambridge, UK, 1991, 92–99.
- M. TAYA, K. E. LULAY, and D. J. LLOYD: Acta Metall. Mater., 1991, 39, 73–87.
- R. J. ARSENAULT and N. SHE Mater. Sci. Eng., 1986, 81, 175–187.
- A. S. TETELMAN and A. J. McMLY, Jr: in ‘Fracture of structural materials’, 42; 1967, New York, Wiley.
- P. A. KARNEZIS: DPhil thesis, University of Oxford, UK, 1995.