REFERENCES
- M. M. ALLEN: ‘Advanced fabrication techniques in powder metallurgy and their economic implications’, AGARD Conf. Proc. no. 200, November 1976, 5.
- D. L. WILLIAMS: mt. J. Powder Metall., 1977, 20, (2), 84.
- M. DAHLEN and L. WINBERG: Met. Sci., 1979, 13, 163.
- P. S. WOOD: unpublished work, Rolls-Royce Ltd, Bamolds-wick, 1979.
- J. C. FRECHE: `Aerospace structural materials', NASA—SP-227, 1970, 71-89.
- S. H. REICHMAN and J. W. SMYTHE: `Modern developments in powder metallurgy', (ed. H. H. Hausner), 5; 1971, New York, Plenum.
- C. S. KORTOVICH: ‘Powder metallurgy superalloys for gas tur-bine engines’, final report prepared under NASC Contract N00019-73—C-0138, June 1974.
- L. N. MOSCOWITZ, R. M. PELLOUX, and N. I. GRANT: `SUperallOyS processing: proceedings of second international conference', Metals and Ceramics Information Centre, Report MCIC-72-10, September 1972, Z1—Z25.
- N. G. TURNER: unpublished work, Materials Engineering Dept, AiResearch Manufacturing Co. of Arizona, Phoenix, Ariz., June 1974.
- C. S. KORTOVICH: ‘Development of a powder metallurgy superalloy for use at 1800-2000°F’, report prepared under NASA Contract NAS-3-13488, 11 May 1970-20 Sept. 1973.
- A. R. COX and E. C. VAN REUTH: Met. Technol., 1980, 7, 238.
- Z. JEFFRIES: Trans. AIME, 1919, 60, 588.
- R. IRMANN: Tech. Rundsch., 1949, 41, 19.
- B. A. WILCOX and A. H. CLAUER: Ada Metall., 1972, 20, 743.
- J. S. BENJAMIN: Metall. Trans., 1970, 1, 2943.
- ANON.: ‘Alloy MA6000E, summary of experimental data’, International Nickel Co. Inc., October 1978.
- W. T. GRIFFITHS and L. B. PFEIL: UK patent no. 459 848, 1937.
- J. STRINGER, R. I. JAFFEE, and T. F. KEARNS (eds.): ‘High tempera-ture corrosion of aerospace alloys’, AGARD Conf. Proc. no. 120, 1973.
- J. H. WEBER and M. J. BOMFORD: ‘Fatigue at elevated tempera-tures’, SIP no. 520, 427; 1973, Philadelphia, Pa, ASTM.
- A. H. CLAUER and B. A. WILCOX: Met. Sci. J., 1967, 1, 86.
- T. K. GLASGOW: NASA 79-0763, 1979.
- T. K. GLASGOW: NASA TM 78973, 1978.
- C. F. BARTH, D. E. BLAKE, and T. S. STELSON: NASA CR-135203, 1977.
- R. C. BENN: NADC-78096-60, 1979.
- T. K. GLASGOW: NASA TM X-71888, 1976.
- K. H. HOLKO: Welding Research Supp., 1973, 515s.
- R. E. YOUNT: ‘Oxide dispersion strengthening’, (ed. G. S. Anse11 et al.), 845; 1966, Second Bolton Landing Conference.
- N. KENYON and R. J. HRUBEC: Welding Research Supp., 1974.
- J. MAYFIELD: Aviation Week Space Technol. , 28 May 1979,46.
- R. D. KANE and L. J. EBERT: Metall. Trans., 1976, 7A, 133.
- J. D. WHITTENBERGER: ibid., 1973, 4, 1475.
- B. EDELSON and W. M. BALDWIN: Trans. ASM, 1962, 55, 230.
- J. M. WENTZELL: AGARD Conf. Proc. no. 200, 1976, 506.
- D. J. EVANS: AGARD Conf. Proc. no. 200, 1976, 4A.
- Int. J. Powder Metall. Powder Technol. , 1979, 15, (1), 6.
- G. H. GESSINGER and M. J. BOMFORD: Mt. Metall. Rev. , 1974, 19, 51.
- G. W. MEE'THAM: ‘High temperature alloys for gas turbines’, (ed. D. Coutsouradis), 837; 1978, London, Applied Science Publishers.
- F. A. THOMPSON, C. P. CUTLER, and R. J. SIDDALL: ‘The influence of inclusions on the low cycle fatigue properties of the nickel based superalloy APK 1 produced via the powder route’, Henry Wiggin Technical Report TR 3184, 1979.
- W. BETZ and W. TRACK: paper presented at 109th AIME Annual Meeting, Las Vegas, Nev., 1980.
- M. J. BLACKBURN and B. A. SPRAGUE: Met. Technol., 1977,4, (7), 388.
- G. FRIEDMAN: Met. Frog., 1975, 107, 81.
- R. F. VAUGHAN, P. A. BLENKINSOP, and P. H. MORTON: AGARD Conf. Proc. no. 200, 1976, 11.
- J. DECOURS, J. DEVILLARD, and G. SAINTFORT: AGARD Conf. Proc. no. 200, 1976, 1.
- H. STEPHAN, H. SCHMITT, and R. RUTHARD: AGARD Conf. Proc. no. 256, 1979, 17.
- E. H. DULLIS: ‘New PM methods for manufacturing aircraft parts,’ ASM Technical Report System no. 76-66, 1976.
- R. H. WITT: AGARD Conf. Proc. no. 200, 1976, 12.
- R. H. WITT: paper presented at Conf. on ‘Hot isostatic pressing — its future,’ sponsored by Goreham International Inc., Dundee, Ill., September 1978.