REFERENCES
- R. E. LEWIS, D. WEBSTER, and I, G. PALMER: in ‘A feasibility study for development of structural aluminium alloys from rapidly solidified powders for aerospace structural applications’, Lockheed Research Laboratory final report, contractF33615-77-C-5186,Technical Report AFML-TR-78-102, July 1978, Palo Alto, Calif.
- E. A. STARKE, Jr: Mater. Sci. Eng.,1977, 29, 99.
- M. E. FINE: Metall. Trans. A, 1980, 11A, 365.
- E. A. STARKEJr and G. LOTJERING: in ‘Fatigue and micro-structure’, (ed. M. Meshii), 205; 1979, Metals Park, Ohio, American Society for Metals.
- R. E. SANDERS, Jr and E. A. STARKE, Jr: Metall. Trans. A, 1978, 9A, 1087.
- R. E. SANDERS, Jr and E. A. STARKE, Jr: in `Thermomechanical processing of aluminium alloys', (ed. J. G. Morris), 50; 1979, Warrendale, Pa, The Metallurgical Society of the American Institute of Mining and Metallurgical Engineers.
- J. C. WILLIAMS and E. A. STARKE, Jr: in ‘Deformation, processing and structure’, (ed. G. Krauss), in press; Metals Park, Ohio, American Society for Metals.
- F. OSTERMAN: Metall. Trans. A, 1971, 2A, 2897.
- J. P. LYLE, Jr and w. S. CEBULAK: in ‘Powder metallurgy for high performance applications’, 231; 1972, Syracuse, NY, Syracuse University Press.
- D. P. VOSS: in ‘Structure and mechanical properties of powder metallurgy 2024 and 7075 aluminium alloys’, E OARD-TR-80-1, DFVLR, final report; October 1979, Cologne, Federal Republic of Germany.
- R. S. TOWNER: Annual progress report, DA-36-034-RD-3559RD, 1961-62, Alcoa Research Laboratories, Alcoa Center, Pa.
- W. S. CEBULAK, E. W. JOHNSON, and H. MARCUS: Int. J. Powder Metall. Powder Technol., 1970, 12, 299.
- J. P. LYLE, Jr and w. S. CEBULAK: Metall. Eng. Q., 1974, 14, 52.
- J. P. LYLE, Jr and w. S. CEBULAK: Metall. Trans., 1975, 6A, 685.
- R. E. SANDERS, Jr, W. L. arra Jr, and R. J. Bum: Lockheed Research Laboratory final report, Technical Report AFML-TR-79-413I, September 1979, Palo Alto, Calif.
- E. E. UNDERWOOD and E. A. STARKE, Jr: in ‘Fracture mechanisms’, (ed. J. T. Fong), 633; 1979, Philadelphia, Pa.
- C. PEARSON and It. PARKINS: in ‘The extrusion of metals’, 146; 1960, New York, John Wilcox.
- H. J. McQUEEN and J. J. JONAS: in ‘Plastic deformation of materials’, (ed. R. J. Arsenault), Vol. 6, 393; 1975, New York, Academic Press.
- J. WERT: 6th Int. Conf. on ‘Strength of metals and alloys’, Vol. 1, 339; 1982, Sidney, Pergamon.
- I. A PALMER, R. E. LEWIS, and D. D. CROOKS: in ‘Aluminium-lithium alloys’, (ed. T. H. Sanders, Jr and E. A. Starke 241; 1981, Warrendale, Pa, The Metallurgical Society of the American Institute of Mining and Metallurgical Engineers.
- v. W. C. KUO and E. Q. STARKE, Jr: Metall. Trans. 1983, 14A, 435.
- S. HIROSE and M. E. FINE: Metall. Trans. 1983, I4A, 1189.