Reference
- IAEA. Guidelines for Safe Design of Shipping Packages Against Brittle Fracture. IAEA TECDOC 717 (Vienna: International Atomic Energy Agency) (August 1993).
- ASME. Rules for Construction of Nuclear Power Plant Components. Appendix G of ASME Code Section III, Division 1, 1992 Edition plus Adenda, American Society of Mechanical Engineers Boiler and Pressure Vessel Code (1992).
- ASME. Rules for Inservice Inspection of Nuclear Power Plant Components. Appendix K of ASME Code Section IX, Division 1, 1992 Edition plus Adenda, American Society of Mechanical Engineers Boiler and Pressure Vessel Code (1992).
- Shirai, K., Ito, C., Arai, T. and Saegusa, T. Integrity of Cast-Iron Cask Against Free Drop Test-Verification of Brittle Failure Design Criterion. Int. J. Radioact. Mater. Transp. 4(1) 5–13 (1993).
- Burdekin, F. M. Draft Appendix IX of Safety Series No. 37: Guidelines for Safe Design of Shipping Packages Against Brittle Fracture. Revised Chapter 2, IAEA TECDOC 717 (Vienna: International Atomic Energy Agency) (April 1994).
- EPRI NP-4785. Predrop Test Analysis of a Spent-Fuel Cask. Fracture Control Corporation (P. McConnell) and Swanson Service Corporation (J. W. Jones) for the Electric Power Research Institute (October 1986).
- Raju, I. S. and Newman, J. C. Stress-Intensity Factors for Circumferential Surface Cracks in Pipes and Rods Under Tension and Bending Loads, In: Fracture Mechanics: Seventeenth Volume, ASTM STP 905. Eds J. H. Underwood, R. Chait, C. W. Smith, D. P. Wilhelm, W. A. Andrews, and J. C. Newman (American Society for Testing and Materials, Philadelphia) pp. 789–805 (1986).
- Salzbrenner, R. J., Van Den Avyle, J. A., Lutz, T. J. and Bradley, W. L. Fracture Toughness Testing of Ductile Cast Iron. In: Fracture Mechanics: Sixteenth Symposium, ASTM STP 868. Eds M. F. Kanninen and A. T. Hopper (American Society for Testing and Materials, Philadelphia) pp. 328–345 (1985).