Advanced search
Publication Cover
International Journal of Radioactive Materials Transport Volume 14, 2003 - Issue 3-4
Journal homepage
7
Views
0
CrossRef citations to date
0
Altmetric
Scientific and Technical Papers

Development of a 500 litre drum for the encapsulation of steam-generating heavy-water reactor sludge at Winfrith

J. Appletont
,
M. Wise
&
A. T. Staples
Pages 155-166 | Published online: 19 Jul 2013

References

  • Matthews, E. Submission for a stage 2 letter of comfort for cemented steam generating heavy water reactor sludge. UKAEA Internal Document (August 2001).
  • Staples, A. T., Latinwo, S., Parkinson, S. J. and Appleton, J. Successful team working in major nuclear decommissioning project: progress on environmental restoration at Winfrith. In: ICEM '03 9th Int. Conf. on Environmental Remediation and Radioactive Waste Management, Oxford (September 2003).
  • Holt, G. 500 litre drums for intermediate level waste: design specification and guidelines. UKAEA Report, NPTM(87)10 (June 1987).
  • Marsh, G. P. Material selection for Winfrith waste container. UKAEA Report, AERE M3592 (November 1986).
  • Lloyd, A. I. Winfrith 500 litre radwaste drums: preliminary trials on pre-production drums. UKAEA Report, AEEW R2386 (March 1988).
  • Stevens, K. Modern standards applied to onsite radioactive package movements. UK Transport Safety Working Party, TSWP(97)P150 Issue 3 (1998).
  • The Radioactive Material ( Road Transport) (Great Britain) Regulations: Statutory Instrument 1996 No. 1350, Atomic Energy and Radioactive Substances. Norwich: HMSO (1996).
  • Chacksfield, R. Mass and activity balance calculations. RWE NUKEM Ltd paper CAL/045710/007 Rev 6 (2002).
  • IAEA. Regulations for the safe transport of radioactive material. IAEA Safety Series No. 6 ( amended) (Vienna: IAEA) (1990).
  • IAEA. Regulations for the safe transport of radioactive material. TS-R-1 (ST-1, revised) (Vienna: IAEA) (1996).
  • Barlow, S. V., Can, N. A. and Wisbey, S. J. Waste package specification for intermediate level waste. Nirex Report N/007 (May 2000).
  • Ritson, D. Bolted lid drum - increased bolt diameter and material specification: finite element model analysis. Electrowatt-Ekono Report 200380.01, parts 1 and 2 (April 2003).
  • Ritson, D. J. Impact assessment of revised bolted lid drum design. Electrowatt-Ekono Report EEUK-200380.01/R/002 (October 2003).
  • Truman, R. WETP-dose rates from one drum; tank 3 FP26 version 6. Private communication to R. Smallcalder, 27 January 2003.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.