Progress in joining of advanced materials: Part 1: Solid state joining, fusion joining, and joining of intermetallics

REFERENCES

• D. V. Dunford and p. G. Partridge: J. Mater. Sci., 1987, 22, 1790–1798.
   Google Scholar
• S. B. Dunkerton: Proc. 2nd Int. Conf. on Diffusion Bonding, Cranfield, UK, March 1990, (ed. D. J. Stephenson), Cranfield Institute of Technology, 1–12.
   Google Scholar
• V. V. Gubarev, Yu. V. Kazakov, and M. L. Finkelstein: Weld. Prod. (USSR), 1976, 23, (7), 57–58.
   Google Scholar
• C. L. Cline: Weld. J., 1966, 45, 481–489.
   Web of Science ®Google Scholar
• ‘Metals handbook’, 9th edn, Vol. 6, ‘Welding, brazing, and soldering’, 678; 1983, Metals Park, OH, ASM.
   Google Scholar
• K. I. Johnson: Proc. Int. Conf. on Power Beam Processing, San Diego, CA, USA, May 1988, (ed. E. A. Metzbower and D. Hauser), ASM International, 1–10.
   Google Scholar
• W.-D. Scharfe: in ‘Materialbearbeitung durch Laserstrahl’, (ed. P. Kulina et al.), 331.1–331.24; 1993, Düsseldorf, DVS.
   Google Scholar
• M. J. Blackburn and M. P. Smith: UK Patent Appl. GB2060693A, 1981.
   Google Scholar
• M. J. Blackburn and M. P. Smith: UK Patent Appl. GB2060694A, 1981.
   Google Scholar
• P. L. Threadgill: Report 463/1992, TWI, Cambridge, 1992.
   Google Scholar
• P. L. Threadgill: Report 536/1995, TWI, Cambridge, 1995.
   Google Scholar
• C. Mccullough, J. J. Valencia, C. G. Levi, and R. Mehrabian: Acta Metall., 1989, 37, (5), 1321–1336.
   Google Scholar
• T. Pfullmann: Diploma thesis, University of Hamburg, Hamburg, Germany, 1990.
   Google Scholar
• J. H. Peperezko: Proc. 6th JIM Int. Symp. on Intermetallic Compounds, Sendai, Japan, June 1991, Japan Institute of Metals, 239–243.
   Google Scholar
• G. Çam: PhD thesis, Imperial College, London, UK, 1990.
   Google Scholar
• C. McCullough, J. J. Valencia, H. Mateos, C. G. Levi, R. Mehrabian, and K. A. Rhyne: Scripta Metall., 1988, 22, 1131–1136.
   Google Scholar
• J. Schuster and h. Ipser: Z. Metallkd, 1990, 81, (6), 389–396.
   Google Scholar
• J. L. Murray: Metall. Trans., 1988, 19A, 243–247.
   Web of Science ®Google Scholar
• J. L. Murray: in ‘Binary alloy phase diagrams’, (ed. T. B. Massalski); 1986, Metals Park, OH, ASM.
   Google Scholar
• S. M. Sastry and H. A. Lipsitt: Metall Trans., 1977, 8A, 1543–1552.
   Web of Science ®Google Scholar
• Y.-W. Kim and f. H. Froes: in ‘High temperature aluminides and intermetallics’, (ed. S. H. Whang et al.), 465–492; 1990, Warrendale, PA, TMS.
   Google Scholar
• W. Cho, A. W. Thompson, and J. C. Williams: Metall. Trans., 1990, 21A, 641–651.
   Google Scholar
• T. T. Nartova and G. G. Spochkin: Russ. Metall., 1970, 2, 138.
   Google Scholar
• R. Strychor, J. C. Williams, and W. A. Soffa: Metall. Trans., 1988, 19A, 225–235.
   Web of Science ®Google Scholar
• D. A. Lukasak: MS thesis, Penn State University, University Park, PA, USA, 1988.
   Google Scholar
• O. N. Andreyev: Russ. Metall., 1970, 2, 12.
   Google Scholar
• C. G. Rhodes, C. H. Hamilton, and N. E. Paton: Report AFML–TR–78–130, Air Force Materials Laboratory, Wright–Patterson Air Force Base, OH, 1978.
   Google Scholar
• T. E. O’connel: AFWAL–TR–83–4050, Air Force Wright Aeronautical Laboratories, Wright–Patterson Air Force Base, OH, 1983.
   Google Scholar
• M. J. Blackburn and M. P. Smith: AFWAL–TR–82–4086, Air Force Wright Aeronautical Laboratories, Wright–Patterson Air Force Base, OH, 1982.
   Google Scholar
• C. H. Ward, J. C. Williams, A. W. Thompson, D. G. Rosenthal, and F. H. Froes: Proc. 6th World Conf. on Titanium, Cannes, France, June 1988, ASM International.
   Google Scholar
• W. A. Baeslack M: Proc. Symp. on Weldability, (ed. R. A. Patterson and K. W. Mahin), 247–258; 1990, Materials Park, OH, ASM International.
   Google Scholar
• G. Luetjering, G. Proske, J. Albrecht, D. Helm, and M. Daeubler: Proc. 6th JIM Int. Symp. on Intermetallic Compounds, Sendai, Japan, June 1991, Japan Institute of Metals, 537–541.
   Google Scholar
• J. M. Larsen, K. A. Williams, S. J. Balsone, and M. A. Stucke: in ‘High temperature aluminides and intermetallics’, (ed. S. H. Whang et al.); 1990, Warrendale, PA, TMS.
   Google Scholar
• J. S. Wu, P. A. Beaven, R. Wagner, Ch. Hartig, and J. Seeger: in ‘High temperature ordered/intermetallic alloys III’, (ed. C. T. Liu et al.), Vol. 33, 761; 1989, Boston, MA, MRS.
   Google Scholar
• J. S. Wu, P. A. Beaven, and R. Wagner: Scr. Metall., 1990, 24, 207–212.
   Google Scholar
• R. Wagner, M. Es-Souni, D. Chen, B. Dogan, J. Seeger, and P. A. Beaven: MRS Symp. Proc., 1991, 213, 1007–1012.
   Google Scholar
• D. Chen, M. Es-souni, P. A. Beaven, and R. Wagner: Scr. Metall., 1991, 25, 1363–1368.
   Google Scholar
• M. Es-Souni, P. A. Beaven, and R. Wagner: Scr. Metall., 1990, 24, 2175–2180.
   Google Scholar
• A. Dutta and D. Banerjee: Scr. Metall., 1990, 24, 1319–1322.
   Google Scholar
• S. H. Yang, P. Jin, E. Dalder, and A. K. Mukherjee: Scr. Metall., 1991, 25, 1223–1228.
   Google Scholar
• A. K. Ghosh and C.-H. Cheng: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 299; 1990, Japan Society for Research on Superplasticity.
   Google Scholar
• N. Ridley, D. W. Livesey, and M. T. Salehi: Proc. Int. Conf. on High Temperature Intermetallics, London, UK, April–May 1991, The Institute of Metals, 198–200.
   Google Scholar
• N. Ridley, M. T. Salehi, and J. Pilling: Proc. Conf. IRC 92, Birmingham, UK, September 1992, 1007–1012.
   Google Scholar
• Y. Guo, C. Zhang, Z. He, P. Liu, and P. Lian: Proc. Symp. ‘Welding, joining, coating, and surface modification of advanced materials’, Dalian, China, September 1994, (ed. J. H. Chen), 285–290.
   Google Scholar
• T. Christman and M. Jain: Scr. Metall., 1991, 25, 767–772.
   Google Scholar
• W. A. Baeslack Hi, T. J. Mascorella, and T. J. Kelly: Weld. J. Res. (Suppl.), 1989, 68, (12), 483s–498s.
   Google Scholar
• W. A. Baeslack Hi and T. Broderick: Scr. Metall., 1990, 24, 319–324.
   Google Scholar
• H. T. Weykamp, D. R. Baker, D. M. Paxton, and M. J. Kaufman: Scr. Metall., 1990, 24, 445–450.
   Google Scholar
• Y.-W. Kim: J. Met., 1989, 41, 24–30.
   Google Scholar
• Y.-W. Kim: in ‘High-temperature ordered intermetallic alloys IV’, (ed. J. O. Stiegler et al.), Vol. 213, 777–794; 1991, Pittsburgh, PA, MRS.
   Google Scholar
• Y.-W. Kim and D. M. Dimiduk: J. Met., 1991, 43, (8), 40–47.
   Google Scholar
• Y.-W. Kim and D. M. Dimiduk: Proc. Conf. ‘The processing, properties and applications of metallic and ceramic materials’, Birmingham, UK, September 1992, (ed. M. H. Loretto and C. J. Beevers), 589–600.
   Google Scholar
• M. Dahms: Adv. Perform. Mater., 1994, 1, 161–186.
   Web of Science ®Google Scholar
• S. Chen: Report GKSS 88/E/32, GKSS Research Center, Geesthacht, 1988.
   Google Scholar
• S. C. Huang and P. A. Siemers: Metall. Trans., 1989, 20A, (10), 1899–1906.
   Google Scholar
• T. Degawa, K. Kamata, and Y. Nagashima: Proc. 6th JIM Int. Symp. on Intermetallic Compounds, Sendai, Japan, June 1991, Japan Institute of Metals, 1003–1008.
   Google Scholar
• K. Kobayashi, S. Miura, Y. Mishima, and T. Suzuki: Proc. 6th JIM Int. Symp. on Intermetallic Compounds, Sendai, Japan, June 1991, Japan Institute of Metals, 245–249.
   Google Scholar
• T. Khan, S. Naka, P. Veyssiere, and P. Costa: Proc. Workshop ‘Intermetallic alloys for use at high temperatures’, Brussels, Belgium, June 1990, EEC.
   Google Scholar
• S. M. L. Sastry and R. J. Lederich: Proc. Conf. ‘Current topics on intermetallics for structural applications’, March 1989, University of Neuchatel/Swiss Society for Materials.
   Google Scholar
• T. Hanamura, Y. Ikematsu, H. Morikawa, M. Tanino, and J. Takamura: Proc. 6th JIM Int. Symp. on Intermetallic Compounds, Sendai, Japan, June 1991, Japan Institute of Metals, 179–183.
   Google Scholar
• M. Yamaguchi: Proc. Conf. ‘Current topics on intermetallics for structural applications’, March 1989, University of Neuchatel/Swiss Society for Materials.
   Google Scholar
• G. Hug and P. Veyssiere: Proc. Int. Symp. ‘Electron microscopy in plasticity and fracture research of materials’, Dresden, German Democratic Republic, October 1989.
   Google Scholar
• T. Hanamura, R. Uemori, and M. Tanino: J. Mater. Res., 1988, 3, 656.
   Web of Science ®Google Scholar
• T. Tsujimoto and K. Hashimoto: in ‘High temperature ordered intermetallic alloys IV’, (ed. C. T. Liu, A. I. Taub, N. S. Stoloff, and C. C. Koch), Vol. 133, 391–396; 1989, Pittsburgh, PA, MRS.
   Google Scholar
• B. Dogan, R. Wagner, and P. A. Beaven: Scr. Metall., 1991, 25, 773–778.
   Google Scholar
• Y.-W. Kim: Acta Metall Mater., 1992, 40, (6), 1121–1134.
   Google Scholar
• Y.-W. Kim: in ‘Microstructure/property relationships in titanium aluminides and alloys’, (ed. Y.-W. Kim and R. R. Boyer), 91–103; 1991, Warrendale, PA, TMS.
   Google Scholar
• S.-C. Huang and D. S. Shih: in ‘Microstructure/property relationships in titanium aluminides and alloys’, (ed. Y.-W. Kim and R. R. Boyer), 105–122; 1991, Warrendale, PA, TMS.
   Google Scholar
• S. R. Nishitani, M. H. Oh, A. Nakamura, T. Fujiwara, and m. Yamaguchi: J. Mater. Res., 1990, 5, 484.
   Web of Science ®Google Scholar
• T. Kawabata, Y. Takezono, T. Kanai, and O. Izumi: Acta Metall., 1988, 36, (4), 963–975.
   Google Scholar
• S. A. Court, V. K. Vasudevan, and H. L. Frazer: Philos. Mag., 1990, A61, 141.
   Google Scholar
• L. Hall and S. C. Huang: in ‘Microstructure/property relationships in titanium aluminides and alloys’, (ed. Y.-W. Kim and R. R. Boyer), 47; 1991, Warrendale, PA, TMS.
   Google Scholar
• P. A. Beaven, F. Appel, B. Dogan, and R. Wagner: in ‘Ordered intermetallics’, (ed. C. T. Liu et al.), Vol. 213, 213; 1991, Dordrecht, Kluwer Academic Publishers.
   Google Scholar
• K. S. Chan and Y.-W. Kim: in ‘Microstructure/property relationships in titanium aluminides and alloys’, (ed. Y.-W. Kim and R. R. Boyer), 179–196; 1991, Warrendale, PA, TMS.
   Google Scholar
• W. O. Soboyejo, S. J. Midea, D. S. Schwartz, M. J. Parzuchowski: in ‘Microstructure/property relationships in titanium aluminides and alloys’, (ed. Y.-W. Kim and R. R. Boyer), 197–211; 1991, Warrendale, PA, TMS.
   Google Scholar
• S. Tsuyama, S. Mitao, and K. Minakawa: in ‘Microstructure/property relationships in titanium aluminides and alloys’, (ed. Y.-W. Kim and R. R. Boyer), 213–226; 1991, Warrendale, PA, TMS.
   Google Scholar
• S. C. Huang and E. L. Hall: in ‘High temperature ordered intermetallic alloys III’, (ed. C. T. Liu et al.), Vol. 133, 373; 1989, Boston, MA, MRS.
   Google Scholar
• J. C. Mishurda, J. C. Lin, Y. A. Chang, and J. H. Peperezko: in ‘High temperature ordered intermetallic alloys III’, (ed. C. T. Liu et al.), Vol. 133, 57; 1989, Boston, MA, MRS.
   Google Scholar
• R. A. Patterson, P. L. Martin, B. K. Damkroger, and L. christodoulou: Weld. J. Res. (Suppl.), 1990, 1, 39s–44s.
   Google Scholar
• O. A. Kaibyshev: in ‘Superplasticity and superplastic forming, (ed. C. H. Hamilton and N. E. Paton), 3–15; 1988, Warrendale, PA, TMS.
   Google Scholar
• S. Mitao, Y. Kosaka, and C. Ouch: J. Jpn Inst. Met., 1988, 24.
   Google Scholar
• T. Maeda, M. Okada, and Y. Shida: in ‘Superplasticity in advanced materials’, (ed. S. Hori et al.), 311–316; 1990, Japan Society for Research on Superplasticity.
   Google Scholar
• H. Clemens, I. Rumberg, P. Schretter, and S. Schwantes: Intermetallics, 1994, 2, 179–184.
   Web of Science ®Google Scholar
• S. Zhang, J. P. Nie, and D. E. Mikkola: Scr. Metall., 1990, 24, (1), 57–62.
   Google Scholar
• A. Raman and K. Schubert: Z. Metallkd, 1965, 56, 99.
   Google Scholar
• J. Tarnacki and Y.-W. Kim: Scr. Metall., 1988, 22, (3), 329–334.
   Google Scholar
• J. P. Nie, S. Zhang, and D. E. Mikkola: Scr. Metall., 1990, 24, (6), 1099–1104.
   Google Scholar
• A. Seibold: Z. Metallkd, 1981, 72, 712–719.
   Google Scholar
• K. S. Kumar and J. R. Pickens: Scr. Metall., 1988, 22, (7), 1015–1018.
   Google Scholar
• H. Mabuchi, K. Hirukawa, and Y. Nakayama: Scr. Metall., 1989, 23, (10), 1761–1766.
   Google Scholar
• H. Mabuchi, K. Hirukawa, and Y. Nakayama: Scr. Metall., 1990, 24, (3), 505–508.
   Google Scholar
• W. O. Powers and J. a. Wert: Metall. Trans., 1990, 21A, 145–151.
   Google Scholar
• G. Hoellrig and A. J. W. Ogilvy: Proc. Int. Conf. on Spray Forming, Swansea, UK, September 1990, 17–19.
   Google Scholar
• S. A. David, J. A. Horton, G. M. Goodwin, D. H. Phillips, and R. W. Reed: Weld. J. Res. (Suppl.), 1990, 4, 133s–140s.
   Google Scholar
• M. J. Cieslack, T. J. Headley, and W. A. Baeslack hi: Metall. Trans., 1990, 21A, 1273–1286.
   Web of Science ®Google Scholar
• R. Strychor, J. C. Williams, and W. A. Soffa: Metall. Trans., 1988, 19A, 225–234.
   Web of Science ®Google Scholar
• H. T. Kestner-Weykamp, C. H. Ward, T. F. Broderick, and M. J. Kaufman: Scr. Metall., 1989, 23, (10), 1697–1702.
   Google Scholar
• J. A. Peters and C. Bassi: Scr. Metall., 1990, 24, (5), 915–920.
   Google Scholar
• E. Manor and D. Eliezer: Scr. Metall., 1989, 23, (8), 1313–1318.
   Google Scholar
• E. Manor and D. Eliezer: Scr. Metall., 1990, 24, (1), 129–134.
   Google Scholar
• M. Gao, J. B. Boodey, and R. P. Wei: Scr. Metall., 1990, 24, (11), 2135–2138.
   Google Scholar
• D. Eliezer, F. H. Froes, and e. Manor: SAMPE Q., 1991, 212, 29–35.
   Google Scholar
• D. Eliezer, F. H. Froes, and C. Suryanarayana: J. Met., 1991, 43, (3), 59–62.
   Google Scholar
• D. S. Schwartz, W. B. Yelon, R. R. Berliner, R. J. Lederich, and S. M. L. Sastry: Acta Metall. Mater., 1991, 39, (11), 2799–2803.
   Google Scholar
• D. E. Matejczyk and C. G. Rhodes: Scr. Metall., 1990, 24, (7), 1369–1373.
   Google Scholar
• D. S. Shih, I. M. Robertson, and H. K. Birnbaum: Acta Metall., 1988, 36, 111–124.
   Google Scholar
• W. A. Baeslack III and P. L. Threadgill: unpublished work, TWI, Cambridge, 1991.
   Google Scholar
• P. L. Threadgill and W. A. Baeslack III: Proc. 6th JIM Int. Symp. on Intermetallic Compounds, Sendai, Japan, June 1991, Japan Institute of Metals, 1021–1025.
   Google Scholar
• A. Cox, W. A. Baeslack III, S. Zorko, and C. English: Proc. Conf. on Diffusion Bonding, Cranfield, UK, April 1990, Cranfield Institute of Technology.
   Google Scholar
• W. A. Baeslack III, P. L. Threadgill, and E. D. Nicholas: Report 442/1992, TWI, Cambridge, 1992.
   Google Scholar
• T. v. Stotler, J. E. Gould, and C. E. English: Proc. 43rd IIW Annual Assembly, Montréal, Que., Canada, July 1990, IIW.
   Google Scholar
• J. E. Gould and T. V. Stotler: Technical Paper 91–GT–213, ASME, New York, NY, 1991.
   Google Scholar
• W. A. Baeslack III, P. L. Threadgill, D. Phillips, and T. F. Broderick: Proc. 7th World Conf. on Titanium, San Diego, CA, USA, June–July 1992, TMS.
   Google Scholar
• W. A. Baeslack III: Proc. Materials Weldability Symp., ASM Fall Meeting, Detroit, MI, USA, September 1990, (ed. R. A. Patterson and K. W. Mahin), ASM International, 247–258.
   Google Scholar
• W. A. Baeslack III, M. J. Cieslack, and t. J. Headley: Scr. Metall., 1988, 22, (7), 1155–1160.
   Google Scholar
• W. A. Baeslack III and M. J. Cieslack: Scr. Metall., 1989, 23, (5), 717–720.
   Google Scholar
• W. A. Baeslack III, M. J. Cieslack, and T. J. Headley: Proc. 2nd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, May 1989, ASM International, 211–216.
   Google Scholar
• S. A. David: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, ASM International, 241–245.
   Google Scholar
• W. A. Baeslack III, D. Phillips, and G. K. Scarr: unpublished work.
   Google Scholar
• Y. Nakao, K. Shinozake, and M. Hamada: Proc. Int. Conf. on High Temperature Aluminides and Intermetallics, San Diego, CA, USA, September 1991, ASM International.
   Google Scholar
• P. Yan, C. A. Hippsley, M. Strangwood, and E. R. Wallach: Proc. Int. Conf. on High Temperature Intermetallics, London, UK, April–May 1991, Institute of Metals, 184–187.
   Google Scholar
• P. Yan, R. E. Somekh, and E. R. Wallach: Proc. 3rd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, June 1992, (ed. S. A. David and J. M. Vitek), ASM International, 1063–1067.
   Google Scholar
• P. Yan and E. R. Wallach: Intermetallics, 1993, 1, 83.
   Web of Science ®Google Scholar
• Y. Nakao, K. Shinozaki, and M. Hamada: Proc. 3rd Int. Conf. on Trends in Welding Research, Gatlinburg, TN, USA, June 1992, (ed. S. A. David and J. M. Vitek), ASM International, 1057–1061.
   Google Scholar
• G Çam, K.-H. Bohm, J. Müllauer, and M. Koçak: JOM, 1996, 48, (11), 66–68.
   Web of Science ®Google Scholar
• G. Çam, J. Müllauer, and M. Koçak: Sci. Technol. Weld. Joining, 1997, 2, (5), 213–219.
   Web of Science ®Google Scholar
• K.-H. Bohm, V. Ventzke, G. Çam, and M. Koçak: Schweissen Schneiden, 1997, 49, (9), 660–671.
   Google Scholar
• G. Çam and M. Koçak: unpublished work, GKSS Research Center, Geesthacht, 1997.
   Google Scholar
• P. L. Threadgill and B. G. I. Dance: Report 498/1994, TWI, Cambridge, 1994.
   Google Scholar
• K. N. Hou, M. C. Juhas, W. A. Baeslack III, H. L. Fraser, and d. Phillips: Proc. 3rd Int. Conf. on Trends in Welding Research, June 1992, Gatlinburg, TN, USA, (ed. S. A. David and J. M. Vitek), ASM International, 1135–1137.
   Google Scholar
• H. Horn: Proc. Conf. Eurojoin 1, Strasbourg, France, November 1991, 441–448.
   Google Scholar
• R. A. Patterson and B. K. Damkroger: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, ASM International, 259–267.
   Google Scholar
• C. T. Liu and K. S. Kumar: J. Met., May 1993, 38–44.
   Google Scholar
• D. B. Miracle: Acta Metall. Mater., 1993, 41, (3), 649–684.
   Google Scholar
• R. D. Noebe, R. R. Bowman, and M. V. Nathal: Int. Mater. Rev., 1993, 38, (4), 193–232.
   Web of Science ®Google Scholar
• K. Aoki and D. Izumi: Nippon Kinzatu Gakkaishi, 1979, 43,1190.
   Google Scholar
• C. T. Liu, C. L. White, and J. A. Horton: Acta Metall., 1985, 33, 213–229.
   Google Scholar
• E. P. George, C. T. Liu, and D. p. Pope: Scr. Metall. Mater., 1992, 27, 365–370.
   Google Scholar
• E. P. George, C. T. Liu, and D. P. Pope: Scr. Metall. Mater., 1993, 28, 857–862.
   Google Scholar
• E. P. George, C. T. Liu, and D. P. Pope: Scr. Metall Mater., 1994, 30, 37–42.
   Google Scholar
• E. P. George, C. T. Liu, and D. P. Pope: Acta Mater., 1996, 44, (5), 1757–1763.
   Google Scholar
• J. W. Cohron, E. P. George, L. Heatherly, C. T. Liu, and R. H. Zee: Intermetallics, 1996, 4, 497–502.
   Web of Science ®Google Scholar
• C. T. Liu: Scr. Metall. Mater., 1992, 27, 25–28.
   Google Scholar
• K. H. Lee, J. T. Lukowski, and C. L. White: Intermetallics, 1997, 5, 483–490.
   Web of Science ®Google Scholar
• J. H. Westbrook: Trans. TMS-AIME, 1957, 209, 898.
   Google Scholar
• P. A. Flinn: Trans. TMS-AIME, 1960, 218, 145.
   Google Scholar
• R. G. Davies and N. S. Stoloff: Trans. TMS-AIME, 1965, 233, 714.
   Google Scholar
• D. I. Ash, G. R. Edwards, and M. C. Maguire: Proc. Symp. on Weldability of Materials, Detroit, MI, USA, October 1990, (ed. R. A. Patterson and K. W. Mahin), ASM International, 269–274.
   Google Scholar
• S. A. David, W. A. Jemian, C. T. Liu, and J. A. Horton: Weld. J. Res. (Suppl.), 1985, 64, (1), 22s–28s.
   Google Scholar
• M. L. Santella and S. A. David: Weld. J. Res. (Suppl.), 1986, 65, (5), 129s–137s.
   Google Scholar
• M. L. Santella, S. A. David, and C. L. White: Proc. Symp. on High Temperature Ordered Intermetallic Alloys, 496; 1985, Boston, MA, MRS.
   Google Scholar
• M. L. Santella, J. A. Horton, and S. A. David: Weld. J. Res. (Suppl.), 1988, 67, (3), 63s–69s.
   Web of Science ®Google Scholar
• M. L. Santella: Scr. Metall. Mater., 1993, 28, 1305–1310.
   Google Scholar
• M. L. Santella and V. K. Sikka: Proc. 2nd Int. Conf. on Advanced Joining Technologies for New Materials, Cocoa Beach, FL, USA, March 1994, AWS.
   Google Scholar
• E. M. Schulson: in ‘High-temperature ordered intermetallic alloys’, Vol. 39, 507; 1987, Pittsburgh, PA, MRS.
   Google Scholar
• C. Chen and G. H. Chen: Scr. Metall., 1988, 22, 1857–1861.
   Google Scholar
• P. A. Molian, y. M. Yang, and T. S. Srivatsan: J. Mater. Sci., 1992, 27, 1857–1868.
   Web of Science ®Google Scholar
• G. R. Edwards, M. C. Maguire, and B. K. Damkroger: in ‘Recent trends in welding science and technology’, (ed. S. A. David and J. M. Vitek), 649–654; 1989, Materials Park, OH, ASM International.
   Google Scholar
• W. F. Gale and S. V. Orel: Proc. 2nd Int. Conf. on Advanced Joining Technologies for New Materials, Cocoa Beach, FL, USA, March 1994, AWS.
   Google Scholar
• M. J. Strum and G. A. Henshall: Proc. 2nd Int. Conf. on Advanced Joining Technologies for New Materials, Cocoa Beach, FL, USA, March 1994, AWS.
   Google Scholar
• C. T. Liu, C. G. Mckamey, and E. H. Lee: Scr. Metall., 1990, 24, 385–390.
   Google Scholar
• J. A. Horton, C. T. Liu, and C. C. Koch: Proc. Conf. ‘High-temperature alloys: theory and design’, Bethesda, MD, USA, April 1984, (ed. J. O. Stiegler), TMS–AIME, 309.
   Google Scholar
• W. R. Kerr: Metall. Trans., 1986, 17A, 2298–2300.
   Web of Science ®Google Scholar
• R. G. Bord au: Report AFWAL–L–TR–87–4009, Air Force Wright Aeronautical Laboratories, Wright–Patterson Air Force Base, OH, 1987.
   Google Scholar
• M. G. Mendiratta, S. K. Ehlers, D. M. Dimiduk, W. R. Kerr, S. Mazdiyasni, and H. A. Lipsitt: in ‘High-temperature ordered intermetallic alloys II’, (ed. C. C. Koch et al.), Vol. 81, 393; 1987, Pittsburgh, PA, MRS.
   Google Scholar
• R. S. Diehm and D. E. Mikkola: in ‘High-temperature ordered intermetallic alloys II’, (ed. C. C. Koch et al.), Vol. 81, 329; 1987, Pittsburgh, PA, MRS.
   Google Scholar
• G. Culbertson and c. s. Kortovich: Report AFWAL–TR–4115, Air Force Wright Aeronautical Laboratories, Wright–Patterson Air Force Base, OH, 1986.
   Google Scholar
• C. G. Mckamey, C. T. Liu, S. A. David, J. A. Horton, D. H. Pierce, and J. J. Campbell: Report ORNL/TM–10793, Oak Ridge National Laboratory, Oak Ridge, TN, 1988.
   Google Scholar
• S. A. David, J. A. Horton, C. G. McKamey, T. Zacharia, and R. W. Reed: Weld. J. Res. (Suppl.), 1989, 68, (9), 372s–381s.
   Google Scholar
• S. A. David and M. L. Santella: Proc. 1st United States–Japan Symp. on Advances in Welding Metallurgy, San Francisco, CA, USA, Yokohama, Japan, June 1990, 65–77.
   Google Scholar
• S. A. David and T. Zacharia: Weld. J. Res. (Suppl.), 1993, 72, (5), 201s–207s.
   Google Scholar
• R. D. Wilson, J. R. Woodyard, and J. H. Devletian: Weld. J. Res. (Suppl.), 1993, 72, (3), 101s–106s.
   Google Scholar
• P. J. Maziasz, g. M. Goodwin, C. T. Liu, and S. A. David: Scr. Metall. Mater., 1992, 27, 1835–1840.
   Google Scholar