- R. J. NIKUNEN and J. W. SINN: Cutting Tool Eng., 1988, 40, 67.
- E. BERGMANN, J. VOGEL, and L. SIMMEN: Thin Solid Films, 1987, 153, 219.
- S. SÖDERBERG, S. JACOBSON, and M. OLSSON: Proc. 5th Int. Cong. on Tribology, Helsinki, Finland, June 1989, International Tribology Council and Finnish Society for Tribology, Vol. 1, 412.
- H. A. SUNDQVIST, E. H. SIRVIO, and M. T. KURKINEN: Met. Technol., 1983, 10, 130.
- O. VINGSBO, S. HOGMARK, B. JÖNSSON, and A. INGEMARSSON: in ‘Microindentation techniques in materials science and engineer-ing' (ed. P. J. Blau and B. R. Lawn) STP 889, 257; 1986, Philadelphia, PA, ASTM.
- E. TÖRÖK, A. J. PERRY, L. CHOLLET, and W. D. SPROUL: Thin Solid Films, 1987, 153, 37.
- P. HEDENQVIST, M. OLSSON, and S. SÖDERBERG: Surf Eng., 1989, 5, 141.
- P. HEDENQVIST and M. Olssox: Tribol. Int., 1990, 23, 173.
- P. HEDENQVIST, M. OLSSON, P. WALLEN, A. KASSMAN, S. HOGMARK, and S. JACOBSON: Surf. Coat. Technol., 1990, 41, 243.
- B. E. JACOBSON, C. V. DESHPANDEy, H. J. DOERR, A. A. KARIM, and R. F. BUNSHAH: Thin Solid Films, 1984, 118, 285.
- H. RANDHAWA: Thin Solid Films, 1987, 153, 209.
- W. BOSCH and O. KNOTEK: Met. Powder Rep., 1984, 39, 406.
- H. M. GABRIEL and K. H. KLOOS: Thin Solid Films, 1984, 118, 243.
- K.-H. HABIG: Tribol. Int., 1989, 22, 65.
- J. M. MOLARIUS, A. S. KORHONEN, and E. O. RISTOLAINEN: J. Vac. Sci. Technol. A, 1985, A3, 2419.
- D. S. RICKERBY and S. J. BULL: Surf Coat. Technol., 1989, 39-40, 315.
- M. K. HIBBS, J.-E. SUNDGREN, B. E. JACOBSON, and B.-O. JOHANSSON: Thin Solid Films, 1983, 107, 149.
- M. OLSSON: PhD Thesis, Uppsala University, 1989.
- A. SCHULZ, H.-R. STOCK, H. VETTERS, and P. MAYR: Prakt. Metallogr., 1990, 27, 269.
- A. J. PERRY and M. JAGNER: Thin Solid Films, 1989, 171, 197.
- D. S. RICKERBY: J. Vac. Sci. Technol. A, 1986, A6, 2809.
- D. S. RICKERBY, B. A. BELLAMY, and A. M. JONES: Surf Eng., 1987, 3, 138.
- C. ERNSBERGER, A. J. PERRY, L. P. LEHMAN, A. E. MILLER, A. R. PELTON and B. W. DABROWSKI: Surf Coat. Technol., 1988, 36, 605.
- A. J. PERRY: in Proc. Conf. on ‘Surface modification tech-nologies’, (ed. T. S. Sudarshan and D. G. Bhat), 121; 1988, Warrendale, PA, TMS.
- ‘Ceramic source '86’, Vol. 1, 293; 1985, Westerville, OH, American Ceramic Society.
- M. E. O'HEARN, R. H. PARRISH, and W. C. OLIVER: Thin Solid Films, 1989, 181, 357.
- D. W. RICHERSON: ‘Modern ceramic engineering’, 1982, New York, Marcel Dekker Inc.
- H. RONKAINEN, S. VARJUS, K. HOLMBERG, K. S. FANCEY, A. R. PACE, A. MATTHEWS, B. MATTHES, and E. BROSZEIT: in Proc. 16th Leeds—Lyon Symp. on Tribology, ‘Mechanics of coatings’, (ed. D. Dowson and M. Godet), 453; 1990, Amsterdam, Elsevier.
- U. HELMERSSON, B. O. JOHANSSON, J.-E. SUNDGREN, H. T. G. FTENTZELL, and P. BILLGREN: J. Vac. Sci. Technol. A, 1985, A3, 308.
- A. J. PERRY: Surf Eng., 1986, 2, 183.
- P. A. STEINMANN and H.-E. HINTERMANN: J. Vac. Sci. Technol. A, 1985, A3, 2394.
- J. VALLI and U. MÄKELÄ: Wear, 1987, 115, 215.
- P. HEDENQVIST, M. OLSSON, S. JACOBSON, and S. SoDERBERG: Surf Coat. Technol., 1990, 41, 31.
- A. J. PERRY, J. VALLI, and P. A. STEINMANN: Surf Coat. Technol., 1988, 36, 559.
- J. SEKLER, P. A. STEINMANN, and H.-E. HINTERMANN: Surf Coat. Technol., 1988, 36, 519.
- J. VALLI: J. Vac. Sci. Technol. A, 1986, A4, 3007.
- P. A. STEINMANN, Y. TARDY, and H.-E. HINTERMANN: Thin Solid Films, 1987, 154, 333.
- P. HEDENQVIST: Proc. 4th Nordic Symp. on Tribology, Lubri-cation, Friction and Wear, Hirtshals, Denmark, June 1990, Nordtrib, 485.
- P. HEDENQVIST and M. OLSSOM: Proc. 5th Int. Cong. on Tribology, Helsinki, Finland, June 1989, International Tribol-ogy Council and Finnish Society for Tribology, Vol. 2, 142.
- S. SÖDERBERG, S. HOGMARK, U. ENGMAN, and H. SWAHN: Tribology Int., 1981, 14, 333.
- B. JÖNSSON, L. AKRE, S. JOHANSSON, and S. HOGMARK: Thin Solid Films, 1986, 137, 65.
- S. SRINIVASAN and R. O. SCATTERGOOD: Wear, 1988, 128, 139.
- T. S. EYRE: in ‘Treatise on materials science and technology’, Vol. 14, (ed. D. Scott), 363; 1979, New York, Academic Press.
- M. OLSSON, P. HEDENQVIST, B. STRIDH, and S. SÖDERBERG: Surf Coat. Technol., 1989, 37, 321.
Characterisation of Ti(C,N) and Tin Coatings on Powder Metallurgy High Speed Steels
Reprints and Corporate Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
To request a reprint or corporate permissions for this article, please click on the relevant link below:
Academic Permissions
Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?
Obtain permissions instantly via Rightslink by clicking on the button below:
If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.
Related research
People also read lists articles that other readers of this article have read.
Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.
Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.