Application of Beryllium as First Wall Armour for ITER Primary, Baffle, and Limiter Modules

References

• ITER Technical Basis for the ITER Final Design Report, Cost Review and Safety Analysis, Iter EDA Documentation Series No. 16, IAEA, Vienna, 1998.
   Google Scholar
• C.H Wu: “Erosion and T-retention in EU-I,” June 99, Private Communication.
   Google Scholar
• R. Watson, D. L. Youchison, D. E. Dombrowski et al., “Low Cyclic fatigue of Beryllium,” Proc. 2nd IEA International Workshop on Beryllium Technology for Fusion, Wyoming, Sep. 6–8, 1995. p. 7–38
   Google Scholar
• V. Barabash, S. Tanaka, R. Matera, “Beryllium Assessment and Recommendation for Application in ITER Plasma facing Components,” Proc. of the 3d IEA International Workshop on Beryllium Technology for Fusion, Oct. 22–24, 1997, Mito City, Japan, JAERI-Conf 98-001, p. 1–13, and references therein.
   Google Scholar
• Chaouadi, R., Moons, F. and Puzzolante, J. L., “Tensile and Fracture Toughness Test Results of Neutron Irradiated Bryllium,” Proc. 3d IEA Int. Workshop on Berylium Technology for Fusion, Mito, Japan, Oct. 22–24, 1997, p.241.
   Google Scholar
• Snead, L., “Low-temperature low-dose neutron irradiation effects on Brush Wellman S65-C and Kawecki Berylco P0 beryllium,” to be publ. in J.Nucl. Mater.
   Google Scholar
• F. Saint Antonin, G. Bangeois, G. Le Marouis et al., “Small scale testing of FW/BS modules,” Note Technique D.E.M/S.G.M N 64/96, CEA, CEREM, Dec 1996.
   Google Scholar
• T. Hatano, JAERI, Private Communication, Sept. 1999.
   Google Scholar
• R. G. Castro, A. H. Bartlett, K. E. Elliott and K. J. Hollis, “The structure and thermal properties of plasma-sprayed beryllium for ITER,” 9th Nat. Thermal Spray Conf., Cincinnati, Ohio, 1996
   Google Scholar
• R. G. Castro, P. W. Stanek, K. E. Elliot, et al., Phys. Scripta T64(1996) 77–83.
   Web of Science ®Google Scholar
• R. Giniatulin, I. Mazul, A. Gervash et al., “Investigation of the Be/Cu joints via HHF tests of small-scale mock-ups,” Proc. of the 3rd IAE Workshop on Beryllium Technology for Fusion, Oct. 1997, Mito, Japan, 113–122.
   Google Scholar
• A. Gervash, R. Giniatulin, V. Komarov et al., Fusion Eng. and Design, 39-40 (1998) 543–550.
   Web of Science ®Google Scholar
• A. Gervash, R. Giniatulin, I. V. Mazul, R. Watson, Beryllium armoured mock-ups for fusion heat flux application, Proc. of the 20th Symp. on Fusion Technology, Marseille, Sept. 1998, v.1, 47–50.
   Google Scholar
• B. C. Odegard, C. H. Cadden, “Solid State bonding of Beryllium Copper for an ITER First Wall Application,” Proc. of 3rd EEA Workshop on Beryllium Technology for Fusion, Mito, Japan, Oct. 1997, 123–128.
   Google Scholar
• J. H. Vincent et al., Development of procedure for attaching Beryllium tiles onto CuCrZr testpieces and divertor mock-ups plates”, GEC-Marconi Materials technology, report MS/20416, Nov 1995
   Google Scholar
• M. Roedig, R. Duwe, J. Linke, A. Lodato, Properties of Beryllium as High Heat Flux Material before and after Neutron Irradiation, SOFT20, Marseille, 1998, p. 193.
   Google Scholar
• Mazul, R. Giniatulin, R. Melder, “Post Irradiation Examination of Be-Cu Divertor Mock-up After In-pile Thermocycling Experiment with Active Cooling, Proc. of 3rd IEA Workshop on Beryllium Technology for Fusion, Mito, Japan, Oct. 1997, p.221–228.
   Google Scholar
• V. Barabash, G. Kalinin, R. Matera, et.al., “Joining Technologies for the Plasma Facing Components in ITER,” Proc. of the 20th Symp. on Fusion Technology, Marseille, France, 7–11 Sept. 1998, v. 1, p. 215–218.
   Google Scholar
• A. Lodato, M. Rödig, et al., Heat Shock tests on Beryllium samples before and after neutron irradiation, Proc. of 4th IEA Workshop on Beryllium Technology for Fusion, Karlsruhe, Germany, 15–17 Sept. 1999.
   Google Scholar
• A. Cardella, H. Gorenflo et al., Effect of Plasma disruption Events on Plasma Facing Materials, 9th International Conference on Fusion Materials, Colorado Springs, USA, 10–15 Oct. 1999
   Google Scholar