References
- R. Raffray, et al., “Design and Material Issues for High Performance SiC/SiC-Based Fusion Power Cores,” Fusion Eng. and Design, 55, 55 (2002).
- A.R. Raffray, L. El-Guebaly, S. Gordeev, et al., “High Performance Blanket for ARIES-AT Power Plant,” Proc. 21st Symposium on Fusion Technology, September 2000, Madrid, Spain.
- H. Golfier et al., “Progress on the TAURO Blanket System,” Proc. 21st Symposium on Fusion Technology, September 2000, Madrid, Spain.
- M.A. Abdou, A. Ying, N. Morley, et al., “On the Exploration of Innovative Concepts for Fusion Chamber Technology,” Fusion Eng. and Design, 54, 181 (2001).
- L.A. El-Guebaly, “Neutronics Aspects of ARIES-II and ARIES-IV Fusion Power Reactors,” Fusion Technology, 21, 2128 (1992).
- S. Nishio, S. Ueda, I. Aoki, et al., “Improved Tokamak Concept Focusing on Easy Maintenance,” Fusion Eng. and Design, 41, 357 (1998).
- R.E. Alcouffe, R. Baker, F. Brinkley, et al., “DANTSYS 3.0, A Diffusion Accelerated Neutral Particle Transport Code System, LA-12969-M, Los Alamos National Laboratory (June 1995).
- M. Herman and H. Wienke, “FENDL/MG-2.0 and FENDL/MC-2.0, The Processed Cross-Section Libraries For Neutron-Photon Transport Calculations,” Report IAEA-NDS-176, International Atomic Energy Agency (March 1997).
- S.J. Zinkle and C. Kinoshita, “Defect Production in Ceramics,” J. Nucl. Mater., 251, 200 (1997).
- L. Wagner, et al., “Inertial Fusion Energy Reactor Studies: Prometheus-L and Prometheus-H,” IAEA Technical Meeting and Workshop on Fusion Reactor Design and Technology, 13-17 Sept. 1993.
- M. Sawan, “Geometrical, Spectral and Temporal Differences between ICF and MCF Reactors and Their Impact on Blanket Nuclear Parameters,” Fusion Technology, 10, 1483 (1986).
- M. Sawan, G. Moses, and G. Kulcinski, “Time-Dependent Neutronics Analysis for the HIBALL Heavy Ion Beam Fusion Reactor,” Nuclear Technology/Fusion, 2, 215 (1982).
- L. Snead, T. Hinoki, and Y. Katoh, “Strength of Neutron Irradiated Silicon Carbide and Silicon Carbide Composites,” Submitted to J. Nucl. Mater., 2002.
- E. Lara-Curzio, Ph.D Thesis, Dept. of Materials Science, Rensselaer Polytechnic Institute, 1992.
- R.J. Price, G.R. Hopkins, J. Nucl. Matet., 108–109, 732 (1982).
- R. Matthews, J. Nucl. Mater, 51, 203 (1974).
- J.C. Corelli, J. Hoole, J. Lazzaro, and C.W. Lee, J. Amer. Ceram. Soc., 66, 529 (1983).
- L. Snead, et al., J. Nucl. Mater., Accepted 2002.
- A. Hasegawa, M. Sairo, S. Nogami, K. Abe, and R.H. Jones, J. Nucl. Mater., 253, 31 (1998).
- T. Suzuki, T. Yano, T. Mori, H. Miyazaki, and T. Iseki, Fusion. Technology, 27, 314 (1995).
- M. Sawan, G. Kulcinski, and N. Ghoniem, “Production and Behavior of Point Defects in Pulsed Inertial Confinement Fusion Reactors,” J. Nucl. Mater, 103 & 104, 109 (1981).