References
- ITER Design Requirements Document, ITER doc. no. G A0 GDRD 2 01-07-13 R 1.0
- ITER Plant Description Document, Chap. 2.5, ITER doc. no. G A0 FDR 1 01-07-13 R1.0
- T. Owens et al., Proc. Sixth Topical Conf. on Radiofrequency Plasma Heating, p. 95 (AIP Conf. Proc. No 129, 1985).
- A. Becoulet et al., Proc. Fifteenth Topical Conf. on Radiofrequency Plasma Heating, p. 219 (AIP Conf. Proc. No 694, 2003).
- R. H. Goulding et al., Proc. Fifteenth Topical Conf. on Radiofrequency Plasma Heating, p. 102 (AIP Conf. Proc. No 694, 2003).
- F. Durodie et al., Proc. Fifteenth Topical Conf. on Radiofrequency Plasma Heating, p. 98 (AIP Conf. Proc. No 694, 2003).
- S. K. Combs, Pellet injection technology, Rev. Sci. Instrum. 67 (1993) 1679–1698.
- S. L. Milora et al., Pellet fueling, Nucl. Fusion 35 (1995) 657–754.
- A. Géraud et al., Development status of high speed pellet injectors for fusion devices fuelling, Proc. 20th Symposium on Fusion Technology (1998) 941–944.
- Lang, P. T., et al, “High-efficiency plasma refueling by pellet injection from the magnetic high-field side into ASDEX upgrade,” Phys. Rev. Lett. 79, 1487–1490 (1997); P. T. Lang et al., A system for cryogenic hydrogen pellet high speed inboard launch into a fusion device via guiding tube transfer, Rev. Sci. Instrum. 74 (2003) 3974–3983.
- Baylor, L. R., et al., “Improved core fueling with high field side pellet injection in the DIII-D tokamak,” Phys. Plasmas 7, 1878 (2000).
- Parks, P. B., Sessions, W. D., Baylor, L. R., “Title of Paper,” Phys. Plasmas 7, 1968 (2000).
- Combs, S. K., et al., Rev. Sci. Instrum. 69 (1998) 4012.
- A. Lorenz et al., Impact strength of cryogenic deuterium pellets for injection into tokamak plasmas, Rev. Sci. Instrum. 71 (2000) 3736–3743.
- S. K. Combs et al., Experimental study of curved guide tubes for pellet injection, Proc. 17thIEEE/NPSS Symposium on Fusion Engineering, San Diego, California, 1997, 1102–1105.
- S. K. Combs et al., High-field-side pellet injection technology, Fusion Technology 34 (1998) 419–424.
- S. K. Combs et al., New pellet injection schemes on DIII-D, Proc. 18th IEEE/NPSS Symposium on Fusion Engineering, Albuquerque, New Mexico, 1999, pp. 202–205.
- S. K. Combs et al., ORNL mock-up tests of inside launch pellet injection on JET and LHD, Fusion Engineering and Design 58–59 (2001) 343–347.
- M. J. Gouge et al., A combined microwave cavity and photographic diagnostic for high-speed projectiles, Rev. Sci. Instrum. 61 (1990) 2102–2105.