Development of Solid Breeder Blanket at JAERI

REFERENCES

• S. KONISHI, et al., “DEMO plant design beyond ITER”, Fusion Engineering and Design, 63-64 (2002) 11-17.
   Web of Science ®Google Scholar
• S. MORI, et al., “Blanket and divertor design for the Steady State Tokamak Reactor (SSTR)”, Fusion Engineering and Design, 18 (1991) 249-258.
   Web of Science ®Google Scholar
• M. ENOEDA et al., “Design and technology development of solid breeder blanket cooled by supercritical water in Japan”, Nuclear Fusion, volume 43, issue 12, pages 1837-1844 (2003) and http://stacks.iop.org/0029-5515/43/1837
   Web of Science ®Google Scholar
• H. MIURA, et al., “Design of Test Blanket System for ITER Module Testing”, JAERI-Tech 97-051 (1997).
   Google Scholar
• M. ENOEDA, et al., “Design and Development of Ceramic Breeder Demo Blanket”, IAEA-CN- 69, 17th Fusion Energy Conference, Yokohama, Japan, 19-24 October 1998, FTP/29 (1998).
   Google Scholar
• M. TAMURA et al., “Phase Stability of Reduced Activation Ferritic Steel: 8%Cr-2%W-0.2%V-0.04%Ta-Fe”, J. Nucl. Mater., 155-157 (1988) 620
   Web of Science ®Google Scholar
• S. JITSUKAWA et al., “Development of an extensive database of mechanical and physical properties for reduced-activation martensitic steel F82H”, J. Nucl. Mater., 307-311, (2002) 179-186.
   Web of Science ®Google Scholar
• K. SHIBA, et al., “Reduced activation martensitic steels as a structural material for ITER test blanket”, J. Nucl. Mater., 329-333, (2004) 243-247.
   Web of Science ®Google Scholar
• M. ODA et al., “Development of HIP Bonding Procedure and Mechanical Properties of HIP Bonded Joints for Reduced Activation Ferritic Steel F-82H”, JAERI-Tech 97-013, (1997).
   Google Scholar
• T. HATANO et al., “High heat flux test of a HIP-bonded first wall panel of reduced activation ferritic steel F-82H”, J. Nucl Mater., 283-287 (2000) 685
   Web of Science ®Google Scholar
• T. HIROSE, et al., “Effects of Heat Treatment Process for Blanket Fabrication on Mechanical Properties of F82H”, J. Nucl. Mater., 329-333 (2004) 324-327.
   Web of Science ®Google Scholar
• M. ENOEDA et al., “Effective Thermal Conductivity Measurements of the Binary Pebble Beds by Hot Wire Method for the Breeding Blanket”, Fusion Technol., 34, 877-881 (1998).
   Web of Science ®Google Scholar
• M. ENOEDA et al., “Effective Thermal Conductivity Measurement of the Candidate Ceramic Breeder Pebble Beds By the Hot Wire Method”, Fusion Technol., 39, 612-616 (2001)
   Web of Science ®Google Scholar
• T. HATANO, et al., “Effective thermal conductivity of a Li2TiO3 pebble bed for a DEMO blanket”, Fusion Science and Technology, 44, pp 94-98 (2003)
   Web of Science ®Google Scholar
• H. TANIGAWA, et al., “Effective thermal conductivity of a compressed Li2TiO3 pebble bed”, to be appeared in 23rd SOFT, 20-24 Sept. 2004, Venice, Italy, (2004).
   Google Scholar
• K. TSUCHIYA et al., “Fabrication and Characterization of 6Li-Enriched Li2TiO3 Pebbles by Wet Process”, J. Ceram. Soc. Japan, Supplement, 112, S183-S186 (2004).
   Google Scholar
• T. HOSHINO et al., “Effect on Thermal Property of Li2TiO3 Being Added with Oxide”, presented at 2004 Spring Meeting of Atomic Energy Soc. Japan, March 29-31, 2004, Okayama, Japan, 1-40.
   Google Scholar
• H. KAWAMURA et al., “Status of Beryllium R&D in Japan”, Proc. 6th Int. Workshop on Beryllium Technology for Fusion, Dec. 2-5, 2003, Miyazaki City, Japan; JAERI-Conf. 2004-006, 26 (2004).
   Google Scholar
• M. UCHIDA et al., “Elementary Development of Beryllide Pebble Fabrication by Rotating Electrode Method”, Fusion Eng. Des., 69, 491 (2003).
   Web of Science ®Google Scholar
• K. TSUCHIYA et al., “In-situ Tritium Recovery Experiments of Blanket In-pile Mockup with Li2TiO3 Pebble Bed in Japan”, J. Nucl. Sci. Technol., 38, 996 (2001).
   Web of Science ®Google Scholar
• K. TSUCHIYA et al., “Integrated Experiment of Blanket In-pile Mockup with Li2TiO3 Pebbles”, Fusion Eng. Des., 51-52, 887 (2000).
   Web of Science ®Google Scholar
• S. SATO, et. al., to be presented in this conference.
   Google Scholar
• Y. KAWAMURA et al., “Impact of blanket tritium against the tritium plant of fusion reactor,” Proc. of The 11th International Workshop on Ceramic Breeder Blanket Interactions, Tokyo, Japan, Dec. 15-17 (2003), JAERI-Conf 2004-012, p. 215, Japan Atomic Energy Research Institute (2004).
   Google Scholar
• M. ENOEDA et al., “Recovery of tritium by cryogenic molecular sieve bed in breeding blanket interface condition,” Fusion Technol., 26, 664 (1994).
   Web of Science ®Google Scholar
• Y. KAWAMURA et al., “Extraction of hydrogen from water vapor by hydrogen pump using ceramic protonic conductor,” Fusion Sci. Technol., 45, 33 (2004).
   Web of Science ®Google Scholar