High Heat Flux Performance of Plasma Facing Materials and Components under Service Conditions in Future Fusion Reactors

References

• J. Linke: “Plasma facing materials and components for future fusion devices - development, characterization and performance under fusion specific loading conditions” to be published in Physica Scripta, 2005
   Google Scholar
• R. Aymar and International Team: “ITER status, design, and material objectives,” J. Nucl. Mater. 307 – 311, 1 (2002)
   Google Scholar
• H. Bolt et al.: “Plasma facing and high heat flux materials – needs for ITER and beyond,” J. Nucl. Mater. 307 – 311, 43 (2002)
   Google Scholar
• M. Merola, M. Akiba, V. Barabash, I. Mazul, “Overview on fabrication and joining of plasma facing and high heat flux materials for ITER,” J. Nucl. Mater, 307 – 311, 1525 (2002)
   Web of Science ®Google Scholar
• H. Bolt, V. Barabash, W. Krauss, J. Linke, R. Neu, S. Suzuki, N. Yoshida, ASDEX Upgrade team, “Materials for the plasma facing components of fusion reactors,” J. Nucl. Mater. 329 – 333, 66 (2004)
   Google Scholar
• R. Tivey et al, “ITER divertor, design issues and research and development,” Fusion Eng. Design 46, 207 (1999)
   Web of Science ®Google Scholar
• M. Scheerer, H. Bolt, A. Gervash, J. Linke, I. Smid: “The design of actively cooled plasma-facing components,” Physica Scripta T91, 98 (2001)
   Google Scholar
• J. Linke, P. Lorenzetto, P. Majerus, M. Merola, D. Pitzer, M. Rödig: “EU Development of High Heat Flux Components,” Proc. ANS 16th Topical Meeting on the Technology of Fusion Energy, Madison, Wisconsin, 14. – 16.09.2004
   Google Scholar
• I. Smid, “Material Processing and Testing of Plasma-Interactive Components for Fusion Energy Systems,” Material Science Forum Vols. 475–479, 1355 (2005)
   Google Scholar
• J. M. Linke, T. Hirai, M. Rödig, L. A. Singheiser, “Performance of plasma-facing materials under intense thermal loads in tokamaks and stellarators,” Fus. Sci. Tech., 46, 142 (2004)
   Web of Science ®Google Scholar
• J. Schlosser et al.: “Technologies for ITER divertor vertical target plasma facing components,” Nucl. Fusion 45, 512 (2005)
   Web of Science ®Google Scholar
• T. Hirai, K. Ezato, P. Majerus: “ITER Relevant High Heat Flux Testing on Plasmas Facing Surfaces,” Materials Transactions, Vol. 46, No.3, 412 (2005)
   Web of Science ®Google Scholar
• H. Greuner, B. Böswirth, J. Boscary, G. Hofmann, B. Mendelevitch, H. Renner, R. Rieck: “Final design of W7-X divertor plasma facing components – tests and thermo-mechanical analysis of baffle prototypes,” Fus. Eng. Design 66–68, 447 (2003)
   Web of Science ®Google Scholar
• M. Merola, J. Palmer and the EU ITER Participating Team: ‘EU Activities in Preparation of the Procurement of the ITER Divertor’, Proc. Intern. Symposium on Fusion Nuclear Technology, Tokyo, 22. – 27.05.2005
   Google Scholar
• P. Lorenzetto, B. Boireau, C. Boudot, Ph. Bucci, A. Furmanek, K. Ioki, J. Liimatainene, A. Peacock, P. Sherlock, S. Tahtinen, “Manufacture of Blanket Shield Modules for ITER,” Proc. SOFT-23, Venice, Italy (2004), to be published
   Google Scholar
• G. Federici et al.: “Key ITER plasma edge and plasma-material interaction issues,” J. Nucl. Mater, 313-316, 11 (2003)
   Web of Science ®Google Scholar
• J. Jacquinot et al.: “Recent developments in steady-state physics and technology of tokamaks in Cadarache,” Nucl. Fusion 43, 1583 (2003)
   Web of Science ®Google Scholar
• A. Zhitlukhin, et al: “Effect of ELMs and disruptions on ITER divertor armour materials” J. Nucl. Mater, 337–339, 684 (2005)
   Web of Science ®Google Scholar
• J. Linke, S. Amouroux, E. Berthe, W. Kühnlein, M. Rödig: “Brittle destruction of carbon based materials in transient heat load tests,” Proc. 22nd Symposium on Fusion Technology, Helsinki, 08. – 13.09.2002
   Google Scholar
• T. Hirai, J. Linke, W. Kühnlein, G. Sergienko, S. Brezinsek, “Light emission from carbon-based materials under ITER relevant thermal shock loads,” J. Nucl. Mater. 321, 110 (2003)
   Web of Science ®Google Scholar
• M. Roedig, W. Kuehnlein, J. Linke, D. Pitzer, M. Merola, E. Rigal, B. Schedler, E. Visca: “Post irradiation testing of samples from the irradiation experiments PARIDE 3 and PARIDE 4,” J. Nucl. Mater. 329-333, 766 (2004)
   Web of Science ®Google Scholar
• V. Barabash, G. Federici, J. Linke, C. H. Wu: “Material/plasma surface interaction issues following neutron damage,” J. Nucl. Mater. 313–316, 42 – 51 (2003)
   Web of Science ®Google Scholar
• M. Rödig et al.: “High Heat Flux Performance of Neutron Irradiated Plasma Facing Components,” J. Nucl. Mater. 307–311, 53 (2002)
   Web of Science ®Google Scholar