A Study of the Issues and Experiments for Fusion Nuclear Technology

REFERENCES

• M. ABDOU et al., “FINESSE, A Study of the Issues, Experiments and Facilities for Fusion Nuclear Technology Research & Development (Interim Report),” PPG-821, UCLA-ENG-84-30, University of California, Los Angeles (Oct. 1984).
   Google Scholar
• “TFCX Preconceptual Design Report,” Rev. 1, F-AXXX-8407-006/007, Princeton Plasma Physics Laboratory (1984).
   Google Scholar
• “International Tokamak Reactor, Phase Two, Part 1,” STI/PUB/638, International Atomic Energy Agency, Vienna (1983).
   Google Scholar
• R. TOSCHI et al., “NET as the Next Major Device in Europe,” Workshop on Fusion Technology Facilities, Karlsruhe, FRG (1984).
   Google Scholar
• Κ. TOMABECHI et al., “Concept for the Next Tokamak,” Fusion Reactor Design and Technology, Vol. I, STI/PUB/616, International Atomic Energy Agency, Vienna (1983).
   Google Scholar
• C. D. HENNING et al., “Mirror Advanced Reactor Study-Final Report,” UCRL-53480, Lawrence Livermore National Laboratory (1984).
   Google Scholar
• M. A. ABDOU et al., “Blanket Comparison and Selection Study-Interim Report,” ANL/FPP-83-1, Argonne National Laboratory (1983).
   Google Scholar
• M. A. ABDOU et al., “Machine Operation and Test Program,” INTOR/TEST/81-3, USA INTOR/81-1, U.S. Contribution to the International Tokamak Reactor Phase 1 Workshop (1981).
   Google Scholar
• “TASKA — Tandem Spiegelmachine Karlsruhe, A Tandem Mirror Fusion Engineering Test Facility,” KFK 3311/2, UWFDM-500, Kernforschungszentrum Karlsruhe/University of Wisconsin (1982).
   Google Scholar
• E. K. OPPERMAN, “Fusion Materials Irradiation Test Facility-Experimental Capabilities and Test Matrix,” HEDL-TME 81–45, Hanford Engineering Development Laboratory (1982).
   Google Scholar
• D. L. SMITH et al., “Blanket Comparison and Selection Study —Final Report,” ANL/FPP-84-1, Argonne National Laboratory (1984).
   Google Scholar
• J. DAVIS et al., “Assessment of Neutron Requirements and Potential Sources for Fusion Development,” EPRI RP-1969-4, Electric Power Research Institute (1984).
   Google Scholar
• “Anonymous Experimenters Guide,” Rotating Target Neutron Source-II Facility, M-094, Lawrence Livermore National Laboratory (1978).
   Google Scholar
• D. D. ARMSTRONG et al., “An Intense Neutron Source Facility,” Nucl. Instrum. Methods, 145, 127 (1977).
   Google Scholar
• M. S. WECHSLER and W. F. SOMMER, “Spallation Radiation Damage and the Radiation Damage Facility at the LAMPF A-6 Target Position,” J. Nucl. Mater., 122, 1078 (1984).
   Google Scholar
• A. L. TREGO et al., “Fusion Materials Irradiation Test Facility for Fusion Materials Qualification,” Nucl. Technol./Fusion, 4, 695 (1983).
   Web of Science ®Google Scholar
• A. SCHMEPP et al., “Status of the Frankfurt Zero-Mode Proton RFQ,” IEEE Trans. Nucl. Sci., NS-30, 4, 3536 (1983).
   Google Scholar
• T. H. BATZER et al., “Conceptual Design of a Mirror Reactor for a Fusion Engineering Research Facility (FERF),” UCRL-51617, Lawrence Livermore National Laboratory (1974).
   Google Scholar
• T. K. FOWLER and B. G. LOGAN, “Tandem Mirror Technology Demonstration Facility,” UCID-19193, Lawrence Livermore National Laboratory (1981).
   Google Scholar
• J. N. DOGGETT et al., “A Tandem Mirror Technology Demonstration Facility,” UCID-19328, Lawrence Livermore National Laboratory (1983).
   Google Scholar
• K. I. THOMASSEN and J. N. DOGGETT, “A Technology Demonstration Facility,” J. Fusion Energy, 3, 109 (1983).
   Google Scholar
• J. N. DOGGETT, B. G. LOGAN, J. E. OSHER, and K. I. THOMASSEN, “A Fusion Technology Demonstration Facility (TDF),” UCRL-90824, Lawrence Livermore National Laboratory (1984).
   Google Scholar
• K. I. THOMASSEN, J. N. DOGGETT, B. G. LOGAN, and W. D. NELSON, “An Upgrade to MFTF-B for Fusion Technology,” UCRL-90825, Lawrence Livermore National Laboratory (1984).
   Google Scholar
• B. BADGER et al., “TASKA-M, A Low Cost, Near Term Tandem Mirror Device for Fusion Technology Testing,” KfK-3680/PFA-83-7/UWFDM-600, Kernforschungszentrum Karlsruhe/Fusion Power Associates/University of Wisconsin (1983).
   Google Scholar
• D. L. JASSBY and S. S. KALSI, Eds., “FED-R, A Fusion Engineering Device Utilizing Resistive Magnets,” ORNL/FEDC-82/1, Fusion Engineering Design Center (1983).
   Google Scholar
• W. M. STACEY et al., “U.S. FED-INTOR Activity Critical Issues,” FED-INTOR/TEST/82-2, Georgia Institute of Technology (1982).
   Google Scholar
• M. ABDOU et al., “Engineering Testing,” Chap. XII, FED-INTOR/TEST/82-4, Georgia Institute of Technology (1982).
   Google Scholar
• “Reliability Engineering Handbook, Vol. II (Management Manual),” NAVAIR 01-1A-32, Naval Air Systems Command (1977).
   Google Scholar
• P. J. GIERSZEWSKI, CFFTP/University of California, Los Angeles, Private Communication (1984).
   Google Scholar
• L. BROMBERG et al., “A Long Pulse Ignited Test Experiment (LITE),” Nucl. Technol./Fusion, 4, 2, 1013 (1983).
   Web of Science ®Google Scholar
• C. D. HENNING et al., “Fusion Power Demonstration: Baseline Report,” UCID-19975, Lawrence Livermore National Laboratory (1984).
   Google Scholar
• M. A. ABDOU et al., “A Demonstration Tokamak Power Plant Study (DEMO),” ANL/FPP-82-1, Argonne National Laboratory (1982).
   Google Scholar