2
Views
13
CrossRef citations to date
0
Altmetric
Technical Paper

Reliability and Availability Assessments for the Next European Torus

Pages 197-217 | Published online: 09 May 2017

References

  • R. BÜNDE, “Plant Component Identification Scheme (PCIS) for NET,” NET/IN/83-25, Next European Torus (1984).
  • KKS Kraftwerk – Kennzeichensystem, Richtlinien zur Anwendung und Schlüsselteil, Issue 2, Verlag VGB Kraftwerkstechnik, Essen (1983).
  • R. BÜNDE, “Availability Assurance of NET – Status and Strategy of Work,” EUR/XII-324/33, Commission of the European Communities (1984).
  • A. SUPPAN, “Maintenance Scenario and Time Evaluation,” INTOR/IN/84-39, International Tokamak Reactor (1984).
  • H. DJÉRASSI and J. ROUILLARD, “Availability of Nuclear Plant Components of NET,” MC/100-284, Commissariat à l’Energie Atomique (1986).
  • J. HUBER and P. KAFKA, “Evaluation of the Data Base for the ‘Deutsche Risiko-Studie Kernkraftwerke’ (DRS) with Respect to the Availability of NET Components,” GRS-A-1305, Gesellschaft für Reaktorsicherheit (1986).
  • S. BALESTRERI, Joint Research Center, Ispra, Private Communication (1984).
  • J. DEBRAY, H. DJÉRASSI, and J. ROUILLARD, “Failure Rates of First Wall, Blanket, and Divertor Plate,” Commissariat à l’Energie Atomique (in preparation); see also R. BÜNDE, J. DEBRAY, H. DJÉRASSI, and J. ROUILLARD, “Reliability Assessment of First Wall and Blanket Design for the European Nuclear Fusion Device NET,” Proc. 5th Int. Conf. Reliability and Maintainability, Biarritz, France, October 6-10, 1986.
  • H. C. D. NIEUWLAND and R. PEEREBOOM, “Study on the Reliability of Brazing Techniques Applied on a NET First Wall Design,” COBD-87/053, Neratoom (1987).
  • M. GRATTAROLA, V. GUERRESCHI, and F. ROSATELLI, “Collection of Data on ANSALDO Experience in High Temperature Brazing Techniques,” Draft, CPI-T-ZA-035, Ansaldo (1987).
  • K. P. JÜNGST, “Availability of the TESPE Device” (study in progress).
  • A. ULBRICHT, “Availability of the LCT Plant” (study in progress).
  • R. BÜNDE, “On the Availability of the NET Toroidal Field Coils System,” NET/IN/86-39, Next European Torus (1986).
  • P. BRIAND, “Availability of Lower Hybrid Heating” (report in preparation).
  • H. KUUS and R. BÜNDE, “Availability of Ion Cyclotron Resonant Heating” (report in preparation).
  • O. VOLLMER, “Availability of Neutral Beam Injection,” EUR-FU/XII-361/85/49, Commission of the European Communities (1985).
  • H. A. MAYKEMPER, “Conceptual Design of Plasma Vacuum Pumping System of NET,” Report No. 86-714A, Leybold Heraeus (1987).
  • J-C. BOISSIN, “The Conceptual Design of the Cryopumping System” (study in progress).
  • S. DINSMORE, J. LORENZEN, K. PÖRN, and H. UNNEBERG, “Availability Study of the NET Protection, Instrumentation and Control System,” SERC-NP-86/131, Studsvik Energy Research Center (1987).
  • “NET Status Report,” EUR-FU/XII-80/86/51, Commission of the European Communities (Dec. 1985).
  • F. ENGELMANN, M. F. A. HARRISON, R. ALBANESE, K. BORRASS, O. De BARBIERI, E. S. HOTSTON, A. NOCENTINI, J-G. WÉGROWE, and G. ZAMBOTTI, “Next European Torus Physics Basis,” Fusion Technol., 14, 30 (1988).
  • R. TOSCHI, M. CHAZALON, F. ENGELMANN, J. NIHOUL, J. RAEDER, and E. SALPIETRO, “Next European Torus Objectives, General Requirements, and Parameter Choices,” Fusion Technol., 14, 19 (1988).
  • R. BÜNDE, “Preliminary Design of a Reference Cooling System for NET,” NET/IN/86-35, Next European Torus (1985).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.