REFERENCES
- R.P. HAMMOND et al., “Practical Fusion Power,” Mech. Eng. 104, 34 (July 1982).
- C.J. CALL and R.W. MOIR, A Novel Fusion Power Concept Based on Molten Salt Technology, Lawrence Livermore National Laboratory, Livermore, CA, UCRL-98346 (1988), submitted to Nucl. Sci. Eng.
- C. DAVID, “A Mechanical Decoupling of Underground Nuclear Explosion Shock Waves from the Explosion Cavity Walls,” Trans. Am. Nucl. Soc. A056, 127 (1988).
- R.K. THORPE and F.E. HEUZE, “Preliminary Studies of Reinforcement Dynamics for a Reusable Underground Test Chamber,” submitted to the 27th U.S. Rock Mechanics Symposium, University of Alabama, June 23–26, 1986; see also Lawrence Livermore National Laboratory, Livermore, CA, UCRL-94211 (1986).
- R.W. MOIR, “Concept of a Blanket First Wall Supported by Radial Tubes,” Fusion Eng. Design 5, 379 (1988).
- H.S. CULLINGFORD, M.D. KELLER, and R.W. HIGGINS, “Compressive Strength and Outgassing Characteristics of Concrete for Large Vacuum-System Construction,” J. Vac. Sci., Technol. 20, 1043 (1982).
- B. ABRAMZON and W.A. SIRIGNANO, “Droplet Vaporization Model for Spray Combustion Calculations,” submitted for presentation in the session on Combustion Processes at the AIAA 26th Aerospace Sciences Meeting, Reno, NV, January 1988.
- K. Hijikata, Y. Mori, S. Kawaguchi, “Direct Contact Condensation of Vapor to Falling Cooled Droplets,” Int. J. Heat Mass Transfer 27, 1631 (1984).
- U. GAT, “The Ultimate Safe (U.S.) Reactor—A Concept for the Third Millenium,” 4th International Conference on Emerging Nuclear Energy Systems, June 30-July 4, 1986, Madrid, G. Velarde and E. Minguez, Eds. (Singapore: World Science, 1987), p. 287.
- U. GAT and S.R. DAUGHERTY, “The Ultimate Safe (U.S.) Reactor,” 7th Miami International Conference on Alternative Energy Sources, Miami Beach, FL, December 9–11, 1985.