References
- D.D. Schuresko, S.L. Milora, S.K. Combs, C.R. Foust, B.E. Argo, G.C. Barber, C.A. Foster and N.S. Ponte, “Development of a Hydrogen Electrothermal Accelerator for Plasma Fueling,” J. Vac. Sci. Technol., A5 (4), 2194 (1987).
- J.D. Hurley, M.A. Bourham and J.G. Gilligan, “Numerical Simulation and Experiment of Plasma Flow in the Electrothermal Launcher SIRENS,” IEEE Trans. Mag., 31, 616 (1995).
- E.Y. Shcolnikov, A.V. Chebotarev, Y.A. Kulikov, A.V. Melnik and S.V. Volkov, “High Efficiency Electrothermal Accelerator,” IEEE Trans. Mag., 31, 447 (1995).
- E. Jacob, S. Bouquet and B. Tortel, “A Global Theoretical Approach for the Electrothermal Gun: Scaling Laws and a 0-D Time-Dependent Model,” IEEE Trans. Mag., 31, 419 (1995).
- S. Cuperman, D. Zoler and J. Ashkenazy, “Analysis of Critical Flow in a Combined Discharge Capillary-Ablative Pipe System,” Plasma Sources Sci. Technol., 3, 593 (1994).
- E. Z. Ibrahim, “The Ablation Dominated Polymethylmethacrylate Arc,” J. Phys. D.: Appl. Phys., 13, 2045 (1980).
- R.L. Burton, F.D. Witherspoon and S.A. Goldstein, ‘The EMET Railgun Projectile’, IEEE Trans. Mag., 27, 527 (1991).
- J.D. Powell and A.E. Zielinski, “Analysis of the Plasma Discharge in an Electrothermal Gun,” Proc. 26th JANNAF Combustion Meeting, Pasadena, CA (1989).
- P. Aubouin, “Electrothermal Launcher Plasma Burner Modeling and Comparison to Experimental Results,” Proc. 4th European Symposium on Electromagnetic Launch Technology, paper 1003, Germany (1993).
- B. Schmit and Th.H.G.G. Weise, “Performance and Results of the TZN Electrothermal Gun Simulation Code,” Proc. 4th European Symposium on Electromagnetic Launch Technology, paper 1016, Germany (1993).
- J.G. Gilligan and R.B. Mohanti, “Time Dependent Numerical Simulation of Ablation Controlled Arcs,” IEEE Trans. Plasma Science, 18, 190 (1990).
- R.W. Kincaid, M.A. Bourham and J.G. Gilligan, “Electrothermal Plasma Gun as a Pellet Injector,” J. Fusion Technol., 26, 637 (1994).
- R.W. Kincaid, Pellet Acceleration in an Electrothermal Plasma Gun, Ph.D. Thesis, North Carolina State University, 1995.
- M.A. Bourham, J.G. Gilligan, O.E. Hankins, W.H. Eddy and J.D. Hurley, “Electrothermal Plasma Source as a High Heat Flux Simulator for Plasma-Facing Components and Launch Technology Studies,” Proc. 9th International Conference on High Power Particle Beams, p.1979, Washington, D.C. (1992).
- A. Loeb and Z. Kaplan, “A Theoretical Model for the physical Processes in the Confined High Pressure Discharges of Electrothermal Launchers,” IEEE Trans. Magn., 25, 342 (1989).
- S. Aigner and E. Igenbergs, “Friction and Ablation Measurements in a Round Bore Railgun,” IEEE Trans. Mag., 25, 33 (1989).