REFERENCES
- T. WILLIAMS, R. CHAWLA, P. GRIMM, O. P. JONEJA, R. SEILER, and A. K. ZIVER, “LWR-PROTEUS-New Experiments at a Zero-Power Facility Using Power Reactor Fuel,” Proc. Int. Conf. Physics of Nuclear Science and Technology, Long Island, New York, October 5-8, 1998, American Nuclear Society (1998).
- M. F. MURPHY, A. LUTHI, R. SEILER, P. GRIMM, O. JONEJA, A. MEISTER, R. VAN GEEMERT, F. JATUFF, R. BROGLI, R. JACOT-GUILLARMOD, T. WILLIAMS, S. HELMERSSON, and R. CHAWLA, “Neutronics Investigations for the Lower Part of a Westinghouse SVEA-96+ Assembly,” Nucl. Sci. Eng., 141, 32 (2002).
- C. PRALONG, “Investigation of Within-Pin Reaction Rate Distributions in a Highly Heterogeneous BWR Fuel Assembly,” Thèse EPFL No. 2663, Ecole Polytechnique Fédérale de Lausanne (2002).
- M. EDENIUS, K. EKBERG, B. H. FORSSEN, and D. KNOTT, “CASMO-4. A Fuel Assembly Burnup Program. User’s Manual,” Studsvik/SOA-95/1, Studsvik of America (1995).
- “HELIOS Methods,” in “Program Manual Rev. 3, Program HELIOS-1.5,” Studsvik-Scandpower (1998).
- C. PRALONG, P. GRIMM, O. JONEJA, F. JATUFF, M. MURPHY, and R. CHAWLA, “Within-Pin Reaction Rate Distributions in a SVEA-96+ Fuel Assembly,” Trans. Am. Nucl. Soc., 84, 211 (2001).
- C. PRALONG FAUCHÈRE, F. JATUFF, M. MURPHY, and R. CHAWLA, “Adapting and Applying SPECT to the Investigation of Reaction Rate Distributions Within Lightly Activated Nuclear Fuel Pins,” Nucl. Instrum. Methods Phys. Res. A (to be published).
- “MCNP-A General Monte Carlo N-Particle Transport Code, Version 4B,” LA-12625-M, J. F. BRIESMEISTER, Ed., Los Alamos National Laboratory (1997).
- J. A. FESSLER, “Penalized Weighted Least-Squares Image Reconstruction for Positron Emission Tomography,” IEEE Trans. Med. Imag., 13, 290 (1994).
- “QAD-CGGP. A Combinatorial Geometry Version of QAD-P5A, a Point Kernel Code System for Neutron and Gamma-Ray Shielding Calculations Using the GP Buildup Factor,” RSIC Computer Code Collection, Radiation Shielding Information Center, Oak Ridge National Laboratory (1977).
- I. D. PALMER, K. V. HESKETH, and P. A. JACKSON, “AModel for Predicting the Radial Power in a Fuel Pin,” Proc. IAEA Specialists’ Mtg. Water Reactor Element Performance Computer Modeling, Preston, United Kingdom, March 1982.
- F. JATUFF, O. P. JONEJA, M. MURPHY, C. PRALONG, R. SEILER, and R. CHAWLA, “Methods/Data Testing for Advanced LWR Fuel Designs and Operational Modes in the PROTEUS Facility,” J. Nucl. Sci. Technol., Suppl. 2, 642 (2002).