REFERENCES
- G. S. CHANG, “Monte Carlo Analysis of Burnup-Dependent Plutonium Concentration Profiles in UO2 and MOX Fuel Pins,” Trans. Am. Nucl. Soc., 78, 246 (1997).
- G. S. CHANG and J. M. RYSKAMP, “Depletion Analysis of Mixed-Oxide Fuel Pins in Light Water Reactors and the Advanced Test Reactor,” Nucl. Technol., 129, 326 (2000).
- J. PAPIN, B. CAZALIS, J. M. FRIZONNET, E. FEDERICI, and F. LEMOINE, “Synthesis of CABRI-RIATests Interpretation,” presented at 5th EUROSAFE Forum, November 25–26, Eurosafe (2003).
- C. PRALONG, P. GRIMM, O. P. JONEJA, F. JATUFF, M. MURPHY, and R. CHAWLA, “Within-Pin Reaction Rate Distributions in a SVEA-96+ Fuel Assembly,” Trans. Am. Nucl. Soc., 84, 211 (2001).
- C. PRALONG-FAUCHERE, M. MURPHY, F. JATUFF, and R. CHAWLA, “Within-Pin Reaction Rate Distributions: CASMO-4 and HELIOS Compared Against Tomographic Measurements at the PROTEUS Reactor,” Nucl. Sci. Eng., 150, 27 (2005).
- K. MACKU, F. JATUFF, M. MURPHY, P. GRIMM, O. P. JONEJA, and R. CHAWLA, “Within-Pin 238U-Capture Distributions: CASMO-4 and MCNP4C vs. Activation Foil Measurements,” Trans. Am. Nucl. Soc., 93, 667 (2005).
- T. WILLIAMS, R. CHAWLA, P. GRIMM, O. P. JONEJA, R. SEILER, and A.K. ZIVER, “LWR-PROTEUS-New Experiments at a Zero-Power Facility Using Power Reactor Fuel,” Proc. Int. Conf. Physics Nuclear Science and Technology, Long Island, New York, October 1998.
- G. S. CHANG and R. C. PETERSEN, “Validation of Radial Power Profile in FRAPCON-3 by Monte-Carlo Method,” Trans. Am. Nucl. Soc., 85, 385 (2001).
- J. RHODES and M. EDENIUS, “CASMO-4. A Fuel Assembly Burnup Program. User’s Manual,” SSP-010400 Rev 1, Studsvik Scandpower (2001).
- “MCNP—A General Monte Carlo N-Particle Transport Code,” LA-12625-M, Version 4C, J. F. BRIESMEISTER, Ed., Los Alamos National Laboratory (2000).
- S. HELMERSSON, “Advances in BWR Fuel Development,” Nucl. Eur., 3–4, 24 (2001).
- C. PRALONG, “Investigation of Within-Pin Reaction Rate Distributions in a Highly Heterogeneous BWR Fuel Assembly,” Thèse EPFL No. 2663, Ecole Polytechnique Fédérale de Lausanne (2002).
- K. MACKU, “Validation of Within-Pin Reaction Rate Distributions in a BWR Fuel Assembly via Foil Activation,” Diploma Thesis, Ecole Polytechnique Fédérale de Lausanne (2005).
- K. MACKU, F. JATUFF, M. MURPHY, O. P. JONEJA, R. BISCHOFBERGER, and R. CHAWLA, “Advanced Foil Activation Techniques for the Measurement of Within-Pin Distributions of the 63Cu(n, γ)64Cu Reaction Rate in Nuclear Fuel,” Nucl. Instrum. Methods A, 562, 393 (2006).