38
Views
1
CrossRef citations to date
0
Altmetric
Technical Paper

Experimental Validation of 3-D Reconstructed Pin Power Distributions in Full-Scale BWR Fuel Assemblies with Partial-Length Rods

, &
Pages 292-307 | Published online: 22 Mar 2017

REFERENCES

  • E. SAJI and S.-Y. KOSAKA, “The Effect of a Partial-Length Fuel Rod on Local Axial Power Profiles,” Trans. Am. Nucl. Soc., 74, 292 (1996).
  • T. WILLIAMS et al., “LWR-PROTEUS—New Experiments at a Zero-Power Facility Using Power Reactor Fuel,” Proc. Int. Conf. Physics of Nuclear Science and Technology, Long Island, New York, October 5–8, 1998, Vol. 1, p. 720, American Nuclear Society (1998).
  • “MCNPX User’s Manual, Version 2.5.0,” D. B. PELO-WITZ, Ed., LA-CP-05-0369, Los Alamos National Laboratory (2005).
  • G. PERRET et al., “Characterisation of Radial Reaction Rate Distributions Across the 92-Pin Section of a SVEA-96 Optima2 Assembly,” Ann. Nucl. Energy, 35, 478 (2008).
  • M. F. MURPHY et al., “Comparison of 3D Reaction Rate Distributions Measured in an Optima2 BWR Assembly with MCNPX Predictions,” Ann. Nucl. Energy, 35, 2042 (2008).
  • G. PERRET et al., “Fission Rate Distribution at the 84-pin Radial Section of a SVEA-96 Optima2 BWR Assembly,” Proc. Int. Conf. PHYSOR 2008, Interlaken, Switzerland, September 14–19, 2008.
  • P. GRIMM and G. PERRET, “Experimental Validation of CASMO-4E and CASMO-5M for Radial Fission Rate Distributions in a Westinghouse SVEA-96 Optima2 BWR Fuel Assembly,” Proc. Int. Conf. Advances in Reactor Physics: Linking Research, Industry, and Education (PHYSOR 2012), Knoxville, Tennessee, April 15–20, 2012, American Nuclear Society (2012).
  • R. J. J. STAMM’LER et al., “HELIOS Methods,” Program Manual Rev. 7, Program Version HELIOS-1.9, Studsvik Scandpower, Inc. (2005).
  • S. BØRRESEN et al., “PRESTO-2 Methods,” Program Manual Rev. 9, Program Version PRESTO-2-1.13, Studsvik Scandpower, Inc. (2006).
  • J. RHODES, K. SMITH, and D. LEE, “CASMO-5 Development and Applications,” Proc. Int. Topl. Mtg. Reactor Physics: Advances in Nuclear Analysis and Simulation (PHYSOR 2006), Vancouver, Canada, September 10–14, 2006, American Nuclear Society (2006).
  • J. RHODES, K. SMITH, and D. LEE, “CASMO5/CASMO5-M, A Fuel Assembly Burnup Program: User’s Manual,” SSP-07/431, Rev.0, Studsvik Scandpower, Inc. (2007).
  • S.-Ö. LINDAHL, “SIMULATE-5 Overview,” SSP-10/120, Rev. 0, Studsvik Scandpower, Inc. (2010).
  • F. GIUST, P. GRIMM, and R. CHAWLA, “Experimental Validation of Radial Reconstructed Pin-Power Distributions in Full-Scale BWR Fuel Assemblies With and Without Control Blade,” Ann. Nucl. Energy, 37, 1629 (2010).
  • “The JEFF-3.1 Nuclear Data Library,” A. KONING et al., Eds., JEFF Report 21, NEA No. 6190, Organisation for Economic Co-operation and Development (2006).
  • F. GIUST, “Appraisal of Core Analysis Methods Against Zero-Power Experiments on Full-Scale BWR Fuel Assemblies,” PhD Thesis, École Polytechnique Fédérale de Lausanne (2012).
  • F. GIUST, P. GRIMM, and R. CHAWLA, “Experimental Comparisons of 3D Reconstructed Pin-Power Distributions in Full-Scale BWR Fuel Assemblies,” J. Eng. Gas Turbines Power, 133 (2011).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.