11
Views
0
CrossRef citations to date
0
Altmetric
Technical Paper

Thermal-Hydraulic Design of the Accelerator Production of Tritium Tungsten Neutron Source

, , &
Pages 3-14 | Published online: 13 May 2017

References

  • K. O. PASAMEHMETOGLU, “Overview of the Thermal-Hydraulic Program for the Accelerator Production of Tritium’s Tungsten Neutron Source Design and Safety Analyses,” AccApp’99, Proc. 2nd Int. Topl. Mtg. Nuclear Applications of Accelerator Technology, Gatlinburg, Tennessee, September 20-23, 1998, p. 448, American Nuclear Society (1998).
  • J. P. HOLMAN, Heat Transfer, 5th ed., McGraw-Hill Book Company, New York 1981.
  • W. M. KAYS and E. Y. LEUNG, “Heat Transfer in Annular Passages: Hydrodynamically Developed Turbulent Flow with Arbitrarily Prescribed Heat Flux,” Int. J. Heat Mass Transfer, 6, 537 (1963).
  • P. SAHA and N. ZUBER, “Point of Net Vapor Generation and Vapor Void Fraction in Subcooled Boiling,” Proc. 5th Int. Heat Transfer Conf., Tokyo, Japan, September 3-7, 1974, paper B4.7, Science Council of Japan (1974).
  • J. G. COLLIER, Convective Boiling and Condensation, 2nd ed., McGraw-Hill Book Company, New York (1981).
  • J. W. SPORE, S. JOLLY-WOODRUFF, T. KNIGHT, J.-C. LIN, R. NELSON, K. PASAMEHMETOGLU, R. STEINKE, and C. UNAL, “TRAC-PF1/MOD2 Manuals,” Vols. 1-3, NUREG/CR-5673, U.S. Nuclear Regulatory Commission; see also LA-12031-M, Los Alamos National Laboratory (1992).
  • S.-K. CHENG and N. E. TODREAS, “Hydrodynamic Models and Correlations for Bare and Wire-Wrapped Hexagonal Rod Bundles—Bundle Friction Factors, Subchannel Friction Factors and Mixing Parameters,” Nucl. Eng. Des., 92, 227 (1986).
  • I. E. IDELCHIK, Handbook of Hydraulic Resistance, 3rd ed., CRC Press, Boca Raton, Florida (1994).
  • S. KAKAC, R. K. SHAH, and W. AUNG, Handbook of Single-Phase Convective Heat Transfer, John Wiley & Sons, New York (1987).
  • J. E. KENNEDY, “Onset of Flow Instability in Uniformly Heated Microchannels,” MS Thesis, Georgia Institute of Technology (Aug. 1997).
  • G. M. ROACH, “Onset of Flow Instability and Critical Heat Flux in Uniformly Heated Microchannels,” MS Thesis, Georgia Institute of Technology (June 1998).
  • G. P. CELATA, M. CUMO, and A. MARIANI, “Burnout in Highly Subcooled Water Flow Boiling in Small Diameter Tubes,” Int. J. Heat Mass Transfer, 36, 1269 (1994).
  • C. L. VANDERVORT, A. E. BERGLES, and M. K. JENSEN, “An Experimental Study of Critical Heat Flux in Very High Heat Flux Subcooled Boiling,” Int. J. Heat Mass Transfer, 37 Suppl., 161 (1994).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.