References
- “Loss of Residual Heat Removal System-Diablo Canyon, Unit 2, April 10, 1987,” NUREG-1269, U.S. Nuclear Regulatory Commission (1987).
- “Loss of Vital AC Power and the Residual Heat Removal System During Mid-Loop Operations at Vogtle Unit 1 on March 20, 1990,” NUREG-1410, U.S. Nuclear Regulatory Commission (June 1990).
- “Shutdown and Low Power Operation at Commercial Nuclear Power Plants in the United States,” NUREG-1449, U.S. Nuclear Regulatory Commission (Sep. 1993).
- S. A. NAFF et al., “Thermal-Hydraulic Processes During Reduced Inventory Operation with Loss of Residual Heat Removal,” NUREG/CR-5855, EGG-2671, EG&G Idaho (Feb. 1992).
- K. R. PARRISH and H. A. TILL, “Palo Verde Nuclear Generating Station Midloop Condition RETRAN Model,” Nucl. Technol, 93, 53 (1991).
- Y. A. HASSAN and L. L. RAJA, “Simulation of Loss of RHR During Midloop Operations and the Role of Steam Generators in Decay Heat Removal Using the RELAP5/MOD3 Code,” Nucl. Technol., 103, 310 (1993).
- M. B. SATTISON et al., “Low-Power and Shutdown Models for the Accident Sequence Precursor (ASP) Program,” Trans. 24th Water Reactor Safety Information Mtg. (WRSIM), Be-thesda, Maryland, October 21-23, 1996, U.S. Nuclear Regulatory Commission (1996).
- “Final Safety Analysis Report: Yonggwang Nuclear Power Plant Units 3 and 4,” Korea Electric Power Company (Mar. 1996).
- K. E. LARSON et al., “RELAP5/MOD3 Code Manual: User’s Guide and Input Requirements,” NUREG/CR-5535, U.S. Nuclear Regulatory Commission (INEL-95/0174), Vol. 1-5 (Aug. 1995).
- K. W. SEUL, Y. S. BANG, and H. J. KIM, “Plant Behavior Following a Loss-of-Residual-Heat-Removal Event Under a Shutdown Condition,” Nucl. Technol., 126, 265 (1999).
- H. NAKAMURA and Y. KUKITA, “PWR Thermal-Hydraulic Phenomena Following Loss of Residual Heat Removal (RHR) During Mid-Loop Operation,” Proc. Int. Conf. New Trends in Nuclear System Thermohydraulics, Pisa, Italy, May 30-June 2, 1994, p. 77, University of Pisa (1994).
- S. BANERJEE and Y. A. HASSAN, “RELAP5/MOD3 Simulation of the RHR System During Midloop Operation Experiment Conducted at the ROSA-IV Large Scale Test Facility,” Proc. Int. Conf. New Trends in Nuclear System Thermo-hydraulics, Pisa, Italy, May 30-June 2, 1994, p. 407 (1994).
- Y.-M. FERNG and C.-H. LEE, “Assessment of the Simulation Capability of RELAP5/MOD3 Compared with IIST Tests for Loss of the Residual Heat Removal System During Mid-loop Operation,” Nucl. Technol., 116, 19 (1996).
- “Safety Analysis Operational Data,” Revision 4, SA-13-C00-95-005, Arizona Public Service Company (May 1995).