References
- J. BUONGIORNO, R. BALLINGER, C. DAVIS, D. KIM, M. DRISCOLL, P. HEJZLER, S. HERRING, M. KAZIMI, P. MACDONALD, K. MCCARTHY, N. TODREAS, V. SHAH, and K. WEAVER, “Advanced Reactor Technology, Design of an Actinide Burning, Lead-Bismuth Cooled Reactor That Produces Low Cost Electricity, Annual Project Status Report,” INEEL/EXT-99-00693, MIT-ANP-TR-065, Idaho National Engineering and Environmental Laboratory (1999).
- J. BUONGIORNO, N. TODREAS, and M. KAZIMI, “Thermal Design of Lead-Bismuth Cooled Reactors for Actinide Burning and Power Production,” MIT-ANP-TR-066, Massachusetts Institute of Technology (1999).
- S. ZAKI and H. SEKIMOTO, “Safety Aspect of Long-Life Small Safe Power Reactors,” Ann. Nucl. Energy, 22, 11, 711 (1995).
- E. GREENSPAN, E. ELIAS, W. E. KASTENBERG, and N. STONE, “Non-Proliferating Liquid Metal Cooled Reactors for Developing Countries,” CNTWM 98-2, University of California at Berkeley (1998).
- K. CARLSON, P. A. ROTH, and V. H. RANSOM, “ATHENA Code Manual, Vol. I: Code Structure, System Models, and Solution Methods,” EGG-RTH-7397, Idaho National Engineering Laboratory (1986).
- THE RELAP5-3D DEVELOPMENT TEAM, “RELAP5-3D Code Manual, Vol. 1: Code Structure, System Models and Solution Methods,” INEEL-EXT-98-00834, Rev. 1.1b, Idaho National Engineering and Environmental Laboratory (1999).
- THE RELAP5 DEVELOPMENT TEAM, “RELAP5/MOD3 Code Manual, Vol. 1: Code Structure, System Models, and Solution Methods,” NUREG/CR-5535, INEL-95/0174, Idaho National Engineering Laboratory (1995).
- A. SHIEH, “Addition of Lead-Bismuth Eutectic as a Working Fluid in the ATHENA Code,” Software Design and Implementation Document, Idaho National Engineering and Environmental Laboratory (1999).
- A. EL-BOHER, S. LEVIN, Y. UNGER, and H. BRANOVER, “Experimental Studies of Liquid Metal Two-Phase Flows in Vertical Pipes,” Proc. 1st World Conf. Experimental Heat Transfer, Dubrovnik, Yugoslavia, September 1988, Elsevier Scientific Publishing Company.
- H. BRANOVER, “Liquid Metals in MHD Power Systems—A Review of Concepts and Experiments,” Proc. 4th Int. Conf. Liquid Metal Engineering and Technology, Avignon, France, October 17–21, 1988, Vol. 2, Société Française d’Energie Atomique.
- I. KATAOKA and M. ISHII, “Drift Flux Model for Large Diameter Pipe and New Correlation for Pool Void Fraction,” Int. J. Heat Mass Transfer, 30, 1927 (1987).
- B. CHEXAL and G. LELLOUCHE, “A Full-Range Drift-Flux Correlation for Vertical Flows (Rev. 1),” EPRI NP-3989-SR, Electric Power Research Institute (1986).
- N. ZUBER and J. FINDLAY, “Average Volumetric Concentrations in Two-Phase Flow Systems,” J. Heat Transfer, 87, 453 (1965).
- N. ZUBER, F. W. STAUB, G. BIJWAARD, and P. G. KROEGER, “Steady-State and Transient Void Fraction in Two-Phase Flow Systems,” GEAP-5417, General Electric Company (1967)