References
- J. J. PARK, D. P. BUTT, and C. A. BEARD, “Review of Liquid Metal Corrosion Issues for Potential Containment Materials for Liquid Lead and Lead-Bismuth Eutectic Spallation Targets as a Neutron Source,” Nucl. Eng. Des., 196, 315 (2000).
- J. KONYS, H. MUSCHER, Z. VOSS and O. WEDEMEYER, “Development of Oxygen Meters for the Use in Lead-Bismuth,” J. Nucl. Mater., 296, 289 (2001)
- F. P. BERGER and K. F. F. L. HAU, “Mass Transfer in Turbulent Pipe Flow Measured by Electrochemical Method,” Int. J. Heat Mass Transfer, 20, 1185 (1977).
- D. C. SILVERMAN, “Rotating Cylinder Electrode for Velocity Sensitivity Testing,” Corrosion, 40, 220 (1984).
- P. HARRIOTT and R. M. HAMILTON, “Solid Liquid Mass Transfer in Turbulent Pipe Flow,” Chem. Eng. Sci, 20, 1073 (1965).
- F. BALBAUD-CELERIER and F. BARBIER, “Investigation of Models to Predict the Corrosion of Steels in Flowing Liquid Lead Alloys,” J. Nucl. Mater., 289, 227 (2001).
- F. N. REMY and M. BOUCHACOURT, “Flow-Assisted Corrosion: A Method to Avoid Damage,” Nucl. Eng. Des., 133, 23 (1992).
- S. MALANG and D. L. SMITH, “Modeling of Liquid-Metal Corrosion/Deposition in a Fusion Reactor Blanket,” ANL/FPP/TM-192, Argonne National Laboratory (1984).
- N. LI, “Active Control of Oxygen in Molten Lead-Bismuth Eutectic Systems to Prevent Steel Corrosion and Coolant Contamination,” J. Nucl. Mater., 300, 73 (2002).
- W. V. PINCZEWSKI and S. SIDEMAN, “A Model for Mass (Heat) Transfer in Turbulent Tube Flow. Moderate and High Schmidt (Prandtl) Number,” Chem. Eng. Sci., 29, 1969 (1974).
- R. R. MILLER, Liquid Metals Handbook, R. N. LYON, Ed., United States Government Printing Office, Washington, D.C. (1954).
- W. M. ROBERTSON, “Diffusion of Cobalt and Iron in Liquid Lead Measured by Grain Boundary Grooving,” Trans. TMS-AIME, 242, 2139 (1968).
- J. SANNIER and G. SANTARINI, “Etude de la corrosion de deux aciers ferritiques par le plomb liquide circulant dans un thermosiphon; recherche d’un modele,” J. Nucl. Mater., 107, 196 (1982).
- J. R. WEEKS and A. J. ROMANO, “Liquid Curves and Corrosion of Fe, Ti, Zr, and Cu in Liquid Bi-Pb Alloy,” Corrosion, 25, 131 (1969).
- X. HE, N. LI, and M. MINEEV, “A Kinetic Model for Corrosion and Precipitation in Non-Isothermal LBE Flow Loop,” J. Nucl. Mater., 297, 214 (2001).
- C. B. DAVIS and A. S. SHIEH, “Overview of the Use of ATHENA for Analysis of Lead Bismuth Cooled Reactors,” Proc. 8th Int. Conf. Nuclear Engineering ICONE-8, Baltimore, Maryland, April 2–6, 2000.