References
- A. HEDIN, “Long-Term Safety for KBS-3 Repositories at Forsmark and Laxmar—A First Evaluation. Main Report of the SR-Can Project,” TR-06-25, Swedish Nuclear Fuel and Waste Management Company (2006).
- F. KING, L. AHONEN, C. TAXÉN, U. VUORINEN, and L. WERME, “Copper Corrosion Under Expected Conditions in a Deep Geologic Repository,” TR-01-23, Swedish Nuclear Fuel and Waste Management Company (2001).
- L. WERME, “Design Premises for Canisters for Spent Nuclear Fuel,” TR-98-08, Swedish Nuclear Fuel and Waste Management Company.
- C.-G. ANDERSSON, “Development of Fabrication Technology for Copper Canisters with Cast Inserts—Status Report in August 2001,” TR-02-07, Swedish Nuclear Fuel and Waste Management Company (2002).
- C.-G. ANDERSSON, P. ERIKSSON, M. WESTMAN, and G. EMILSSON, “Status Report, Canister Fabrication,” TR-04-23, Swedish Nuclear Fuel and Waste Management Company (2004).
- C.-G. ANDERSSON et al., “Probabilistic Analysis and Material Characterisation of Canister Inserts for Spent Nuclear Fuel—Summary Report,” TR-05-17, Swedish Nuclear Fuel and Waste Management Company (2005).
- Annual Book of ASTM Standards, Vol. 03.01, Sec. 3 (2002).
- “Test Plan,” ÅFIS-Report B729, Rev01 (internal report).
- P. MINNEBO, K.-F. NILSSON, and D. BLAGOEVA, “Tensile, Compression and Fracture Properties of Thick-Walled Ductile Cast-Iron Components,” J. Mater. Eng. Performance, 16, 1, 33 (2005).
- K.-F. NILSSON, D. BLAGOEVA, and P. MORETTO, “An Experimental and Numerical Analysis to Correlate Variation in Ductility to Defects and Microstructure in Cast Iron Components,” Eng. Frac. Mech., 73, 1133 (2006).
- F. A. SIMONEN, G. J. SCHUSTER, S. R. DOCTOR, and T. L. DICKSON, “Distributions of Fabrication Flaws in Reactor Pressure Vessels for Structural Integrity, Fatigue Fracture and Damage Analysis,” ASME PVP-Vol 443-2, pp. 133–143 (2002).
- K. HAMBERG, Chalmers University of Technology, Department of Materials and Manufacturing Technology, Personal Communication.
- B. ERIXON, Hållfasthetsanalyser inom probabilistisk analys av kapselhöllfasthet, ÅF-S Report B704, AF-System AB (2004).
- P. DILLSTRÖM, “Probabilistic Analysis of Canister Inserts for Spent Nuclear Fuel,” TR-05-19, Swedish Nuclear Fuel and Waste Management Company.
- P. DILLSTRÖM et al., “A Combined Deterministic and Probabilistic Procedure for Assessment of Components with Cracks—Handbook,” DNV Research Report 2004/01, Rev. 4-1, Det Norske Veritas AB (2004).
- K.-F. NILSSON F. LOFAJ, C.-G. ANDERSSON, and M. BURSTRÖM, “Pressure Test of Two KBS-3 Canister Mock-Ups,” TR-05-18, Swedish Nuclear Fuel and Waste Management Company.
- K.-F. NILSSON, F. LOFAJ, C.-G. ANDERSSON, and M. BURSTRÖM, “Failure of Spent Nuclear Fuel Canister Mock-Ups at High Isostatic Pressure,” Eng. Failure Anal., 14, 47 (2007).
- C.-G. ANDERSSON, “Utveckling av gjutna insatser i segjärn,” R-05-70, Swedish Nuclear Fuel and Waste Management Company.
- L. BÖRGESSON, L.-E. JOHANNESSON, and J. HERNELIND, “Earthquake Induced Rock Shear Through a Deposition Hole: Effect on the Canister and Buffer,” TR-04-02, Swedish Nuclear Fuel and Waste Management Company (2004).