24
Views
1
CrossRef citations to date
0
Altmetric
Technical Paper

Regulatory Issues on the Safety Distance between a VHTR and a H2 Production Facility and an Overpressure Prediction Using Correlations and a CFD Analysis for the JAEA Explosion Test in an Open Space

, , , &
Pages 86-100 | Published online: 10 Apr 2017

References

  • J. H. CHANG, Y. W. KIM, K. Y. LEE, Y. W. LEE, W. J. LEE, J. M. NOH, M. H. KIM, H. S. LIM, Y. J. SHIN, K. K. BAE, and K. D. JUNG, “A Study of a Nuclear Hydrogen Production Demonstration Plant,” Nucl. Eng. Technol., 39, 2, 111 (2007).
  • B. DU TOIT, G. DU PLESSIS, and J. VAN RAVENSWAAY, “The Impact of Separation Distance Between Reactor and Process on the Choice of Secondary Heat Transport Coolant for High Temperature Process Heat Application,” presented at 3rd Int. Topl. Mtg. High Temperature Reactor Technology (HTR2006), Johannesburg, South Africa, October 1–4, 2006.
  • “Regulatory Guide 1.91, Evaluations of Explosion Postulated to Occur on Transportation Routes Near Nuclear Power Plant, Rev. 1,” U.S. Nuclear Regulatory Commission Regulatory Guides—Power Reactor (Division 1); available on the Internet at www.nrc.gov/reading-rm/doc-collections/regguides/power-reactors/active/ (Feb. 1978).
  • “Regulatory Guide 1.174, An Approach for Using Probabilistic Assessment in Risk-Informed Decision on Plant-Specific Changes to the Licensing Basis, Rev. 1,” U.S. Nuclear Regulatory Commission Regulatory Guides—Power Reactor (Division 1); available on the Internet at www.nrc.gov/reading-rm/doc-collections/reg-guides/power-reactors/active/ (Nov. 2002).
  • I. SOCHET, A.-L. VIOSSAT, J.-L. ROUYER, and P. HEMMERICH, “Safe Hydrogen Generation by Nuclear HTR,” Proc. 2004 Int. Congress Advances in Nuclear Power Plants (ICAPP ‘04), Pittsburgh, Pennsylvania, June 13–17, 2004, American Nuclear Society (2004).
  • H. S. KANG, S. B. KIM, W. J. LEE, and H. C. NO, “Regulatory Issues on the Safety Distance Between HTGR and Hydrogen Production System,” Proc. KNS Autumn Mtg., Kyung-Ju, Korea, November 2–3, 2006, Korean Nuclear Society (2006).
  • “Hydrogen as an Energy Carrier and Its Production by Nuclear Power,” IAEA-TECDOC-1085, International Atomic Energy Agency; available on the Internet at www.iaea.org/inis/aws/htgr/fulltext/30027279.pdf (1999).
  • Y. INABA, T. NISHIHARA, and Y. NITTA, “Analytical Study on Fire and Explosion Accidents Assumed in HTGR Hydrogen Production System,” Nucl. Technol., 146, 49 (2004).
  • D. BJERKETVEDT, J. R. BAKKE, and K. VAN WINGERDEN, “Gas Explosion Handbook,” J. Hazard. Mater., 52, 1 (1997).
  • A. C. VANDEN BERG, “The Multi-Energy Method: Basic Concepts and Guidance for Use for Course on Explosion Prediction and Mitigation,” Lecture Note for University of Leeds, TNO Prins Maurits Laboratory (2004).
  • W. P. M. MERCX, A. C. VAN DEN BERG, and D. VAN LEEUWEN, “Application of Correlations to Quantify the Source Strength of Vapor Cloud Explosions in Realistic Situations,” TNO Report PML 1998-C53, TNO Prins Maurits Laboratory (1998).
  • Y. INABA, T. NISHIHARA, M. A. GROETHE, and Y. NITTA, “Study on Explosion Characteristics of Natural Gas and Methane in Semi-Open Space for the HTTR Hydrogen Production System,” Nucl. Eng. Des., 232, 111 (2004).
  • Y. INABA, Japan Atomic Energy Agency, Personal Communication (2007).
  • T. NISHIHARA, K. KUNITOMI, and T. MURAKAMI, “Study on the Separation Distance in the HTGR Hydrogen Production System (GTHR300C),” presented at 3rd Int. Topl. Mtg. High Temperature Reactor Technology (HTR2006), Johannesburg, South Africa, October 1–4, 2006.
  • K. VAN WINGERDEN, O. R. HANSEN, and P. FOISSELON, “Predicting Blast Overpressures Caused by Vapor Cloud Explosions in the Vicinity of Control Rooms,” Process Saf. Prog., 18, 1, 17 (1999).
  • M. F. KANNINEN and C. H. POPELAR, Advanced Fracture Mechanics, Chap. 4, Oxford Engineering Science Series 15, Oxford University Press, New York (1985).
  • C. SMITH, S. BECK, and W. GALYEAN, “Separation Requirement for a Hydrogen Production Plant and High Temperature Nuclear Reactor,” Proc. 2006 Int. Congress Advances in Nuclear Power (ICAPP’06), Reno, Nevada, June 4–8, 2006, American Nuclear Society (2006).
  • “Improved Estimates of Separation Distances to Prevent Unacceptable Damage to Nuclear Power Plant Structures from Hydrogen Detonation for Gaseous Hydrogen Storage,” EGGSSRE-9747, Idaho National Laboratory (1994).
  • S. R. TURNS, An Introduction to Combustion, 2nd ed., McGraw-Hill, New York (2000).
  • N. R. POPAT, C. A. CALTIN, B. J. LINDSTEDT, B. H. HJERTAGER, T. SOLBERG, O. SAETER, and A. C. VAN DEN BERG, “Investigation to Improve and Assess the Accuracy of Computational Fluid Dynamic Based Explosion Model,” J. Hazard. Mater., 45, 1 (1996).
  • “CFX-10.0 Manual,” Ansys Inc. (2006).
  • J. B. HEYWOOD, Internal Combustion Engine Fundamentals, pp. 427–443, McGraw-Hill, New York (1988).
  • K. S. HA, S. W. HONG, Y. R. CHO, and S. B. KIM, “Flame Acceleration Tests with Hydrogen Combustions,” Proc. KNS Autumn Mtg., Pyeong Chang, Korea, October 25–26, 2007, Korean Nuclear Society (2007).
  • M. A. GROETHE, “FY02 Annual Report on Hydrogen Safety in theWorld Energy Network (WE-NET),” SRI Project 10367, The Institute of Applied Energy (2003).
  • “CHEMKIN 4.0.2 Manual,” Reaction Design (2005).
  • H. S. KANG, S. B. KIM, M. H. KIM, W. J. LEE, and H. C. NO, “Development of a Spark Ignition Model for a CFD Analysis of the JAEA Explosion Test,” Proc. KNS Autumn Mtg., Pyeong Chang, Korea, October 25–26, 2007, Korean Nuclear Society (2007).
  • M. F. MODEST, Radiative Heat Transfer, 2nd ed., McGraw-Hill, New York (1993).
  • P. J. COELHO and M. G. CARVALHO, “A Conservative Formulation of the Discreter Transfer Model,” J. Heat Transfer, 119, 118 (1997).
  • B. H. HJERTAGER, “Simulation of Transient Compressible Turbulent Reactive Flows,” Combust. Sci. Technol., 27, 159 (1982).
  • D. B. SPALDING, “Mathematical Models of Turbulent Flames; A Review,” Combust. Sci. Technol., 13, 3 (1976).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.