REFERENCES
- L. J. OTT and R. N. MORRIS, “Irradiation Tests of Mixed-Oxide Fuel Prepared with Weapons-Derived Plutonium,” J. Nucl. Mater., 371, 314 (2007).
- Y. H. KOO, B. H. LEE, and D. S. SOHN, “COSMOS: A Computer Code to Analyze LWR UO2 and MOX Fuel up to High Burnup,” Ann. Nucl. Energy, 26, 47 (1999).
- B. H. LEE, Y. H. KOO, J. Y. OH, J. S. CHEON, and D. S. SOHN, “Improvement of Fuel Performance Code COSMOS with Recent In-Pile Data for MOX and UO2 Fuels,” Nucl. Technol., 157, 53 (2007).
- L. J. OTT, T. TVERBERG, and E. SARTORI, “Mixed-Oxide (MOX) Fuel Performance Benchmarks,” Ann. Nucl. Energy, 36, 375 (2009).
- Y. W. LEE, H. S. KIM, S. H. KIM, C. Y. JOUNG, S. H. NA, G. LEDERGERBER, P. HEIMGARTNER, M. POUCHON, and M. BURGHARTZ, “Preparation of Simulated Inert Matrix Fuel with Different Powders by Dry Milling Method,” J. Nucl. Mater., 274, 7 (1999).
- M. BILLAUX and J. VLIET, “Impact of Fuel Heterogeneities on Fission Gas Release for LWR U-Pu Mixed Oxide Fuels,” presented at International Atomic Energy Agency Specialists’ Meeting Water Reactor Fuel Element Performance Computer Modelling, Windermere, United Kingdom, April 9–13, 1984.
- R. L. GIBBY, “The Effect of Plutonium Content on the Thermal Conductivity of (U,Pu)O2 Solid Solution,” J. Nucl. Mater., 38, 163 (1971).
- Y. H. KOO, B. H. LEE, J. S. CHEON, and D. S. SOHN, “Modeling and Parametric Studies of the Effect of Inhomogeneity on Fission Gas Release in LWR MOX Fuel,” Ann. Nucl. Energy, 29, 271 (2002).
- H. S. KIM, C. Y. JOUNG, B. H. LEE, J. Y. OH, Y. H. KOO, and P. HEIMGARTNER, “Applicability of CeO2 as a Surrogate for PuO2 in a MOX Fuel Development,” J. Nucl. Mater., 378, 98 (2008).
- C. BAGGER, M. MOGENSEN, and C. T. WALKER, “Temperature Measurements in High Burnup UO, Nuclear Fuel: Implications for Thermal Conductivity, Grain Growth and Gas Release,” J. Nucl. Mater., 211, 11 (1994).
- H. K. JOO, J. W. YOO, and J. M. NOH, “The Verification of HELIOS-1.6 for MOX Fuels,” KAERI/TR-1682/2000, Korea Atomic Energy Research Institute.
- W. WIESENACK, B. H. LEE, and D. S. SOHN, “Irradiation Test of MOX Fuel in the Halden Reactor and the Analysis of Measured Data with the Fuel Performance Code COSMOS,” Nucl. Eng. Technol., 37, 317 (2005).
- Ch. HELLWIG, P. HEIMGARTNER, H. S. KIM, and G. LEDERGERBER, TM-43-03-08, Paul Scherrer Institut (2003).
- B. H. LEE, Y. H. KOO, J. S. CHEON, J. Y. OH, and D. S. SOHN, “AUnified Thermal Conductivity Model for LWRMOX Fuel Considering Its Microstructural Characteristics,” J. Nucl. Sci. Technol., Suppl. 3, 705 (2002).
- B. H. LEE, Y. H. KOO, H. S. KIM, J. Y. OH, D. S. SOHN, and C. DEGUELDRE, “Comparison of a Measured and Calculated Thermal Conductivity for an Attrition-Milled MOX Fuel,” presented at Enlarged Halden Project Group Mtg., May 2008.
- B. H. LEE, Y. H. KOO, H. K. JOO, J. S. CHEON, J. Y. OH, and D. S. SOHN, “Radial Power Density Distribution of MOX Fuel Rods,” KAERI/TR-2155/2002, Korea Atomic Energy Research Institute (April 2002).
- D. D. LANNING, C. E. BEYER, and C. L. PAINTER, “FRAPCON-3: Modifications to Fuel Rod Material Properties and Performance Models for High-Burnup Application,” NUREG/CR-6534, Vol. 1, U.S. Nuclear Regulatory Commission (1997).
- C. VITANZA, E. KOLSTAD, and V. GRAZIANI, “Fission Gas Release from UO2 Pellet Fuel at High Burn-Up,” Proc. Topl. Mtg. Light Water Reactor Fuel Performance, Portland, Oregon, April 29–May 3, 1979, American Nuclear Society (1979).
- Y. H. KOO, B. H. LEE, and D. S. SOHN, “Analysis of Fission Gas Release and Gaseous Swelling in UO2 Fuel Under the Effect of External Restraint,” J. Nucl. Mater., 280, 86 (2000).