Thermal-Fluid Characterizations of ZnO and SiC Nanofluids for Advanced Nuclear Power Plants

References

• S. U. S. CHOI, “Enhancing Thermal Conductivity of Fluids with Nanoparticles,” Developments and Applications of Non-Newtonian Flows, FED-vol. 231/MD-vol. 66, American Society of Mechanical Engineers, New York (1995).
   Google Scholar
• S. LEE, S. U. S. CHOI, S. LI, and J. A. EASTMAN, “Measuring Thermal Conductivity of Fluids Containing Oxide Nanoparticles,” J. Heat Transfer, 121, 280 (1999).
   Web of Science ®Google Scholar
• S. DAS, N. PUTRA, and W. ROETZEL, “Pool Boiling Characteristics of Nano-Fluids,” Int. J. Heat Mass Transfer, 46, 851 (2003).
   Web of Science ®Google Scholar
• I. C. BANG and S. H. CHANG, “Boiling Heat Transfer Performance and Phenomena of Al2O3-Water Nano-Fluids from a Plain Surface in a Pool,” Int. J. Heat Mass Transfer, 48, 2407 (2005).
   Web of Science ®Google Scholar
• H. KIM, J. KIM, and M. KIM, “Experimental Study on CHF Characteristics of Water-TiO2 Nano-Fluids,” Nucl. Eng. Technol., 38, 61 (2006).
   Google Scholar
• H. KIM, J. KIM, and M. KIM, “Experimental Study on the Characteristics and Mechanism of Pool Boiling CHF Enhancement Using Nano-Fluids,” Proc. ECI Int. Conf. Boiling Heat Transfer, Spoleto, Italy, May 7–12, 2006, Engineering Conferences International (2006).
   Google Scholar
• S. J. KIM, I. C. BANG, J. BUONGIORNO, and L. W. HU, “Surface Wettability Change During Pool Boiling of Nanofluids and Its Effect on Critical Heat Flux,” Int. J. Heat and Mass Transfer, 50, 19–20, 4105 (2007).
   Web of Science ®Google Scholar
• I. C. BANG and S. H. CHANG, “Applicability of a Nanofluid for a Thermal-Hydraulic System: Critical Heat Flux of Al2O3-Water Nanofluid in a Pool Boiling,” Proc. Int. Congress Advances in Nuclear Power Plants (ICAPP’05), Seoul, Korea, May 15–19, 2005, Vol. 5 (2005).
   Google Scholar
• J. BUONGIORNO and L.-W. HU, “Nanofluid Coolants for Advanced Nuclear Power Plants,” Proc. Int. Congress Advances in Nuclear Power Plants (ICAPP’05), Seoul, Korea, May 15–19, 2005 (2005).
   Google Scholar
• I. C. BANG, J. BUONGIORNO, L. W. HU, and H. WANG, “Measurement of Key Pool Boiling Parameters in Nanofluids for Nuclear Applications,” JSME J. Power and Energy Systems, 2, 1 (2008).
   Google Scholar
• I. C. BANG, “Nanofluids Science and Technology for Advanced Energy Systems,” presented at Global Edge Open Symp., Tokyo, Japan, March 10, 2008.
   Google Scholar
• R. AHMED, “Coolants for Nuclear Reactors”; available on the Internet at http://www.nuc.berkeley.edu/thyd/ne161/rahmed/coolants.html.
   Google Scholar
• Z. LIU and Y. QIU, “Boiling Heat Transfer Characteristics of Nanofluids Jet Impingement on a Plate Surface,” Heat Mass Transfer, 43, 699 (2007).
   Web of Science ®Google Scholar
• S. J. KIM, B. TRUONG, J. BUONGIORNO, L. W. HU, and I. C. BANG, “Study of Two-Phase Heat Transfer in Nanofluids for Nuclear Applications,” Proc. Int. Congress Advances in Nuclear Power Plants (ICAPP ’06), Reno, Nevada, June 4–8, 2006, American Nuclear Society (2006) (CD-ROM).
   Google Scholar
• A. J. SCHRAUTH and N. P. SUH, “Axiomatic Design of Non-Wetting Hemocompatible Surfaces,” Proc. 4th Int. Conf. Axiomatic Design (ICAD2006), Firenze, Italy, June 13–16, 2006.
   Google Scholar
• C. T. NGUYEN, F. DESGRANGES, N. GALANIS, G. ROY, T. MARÉ, S. BOUCHER, and H. ANGUE MINTSA, “Viscosity Data for Al2O3-Water Nanofluid—Hysteresis: Is Heat Transfer Enhancement Using Nanofluids Reliable?” Int. J. Thermal Sci., 47, 2, 103 (2008).
   Web of Science ®Google Scholar
• G. WANG et al., “Single Rod Heat Transfer Tests to Study the Effects of Crud Deposition,” Proc. Int. Conf. Nuclear Engineering, Miami, Florida, July 17–20, 2006 (2006).
   Google Scholar
• N. HENZEL and U. REITZNER, “Process for Introducing Zinc into a Water-Containing Component of the Primary System of a Nuclear Power Plant,” U.S. Patent 520281 (2001).
   Google Scholar
• I. C. BANG and G. HEO, “An Axiomatic Design Approach in Development of Nanofluid Coolants,” Appl. Thermal Eng., 29, 1, 75 (2009).
   Google Scholar
• I. C. BANG, G. HEO, Y. H. JEONG, and S. HEO, “An Axiomatic Design Approach of Nanofluid-Engineered Nuclear Safety Features for Generation III + Reactors,” presented at 7th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics, Operation and Safety, Seoul, Korea, October 5–9, 2008.
   Google Scholar
• I. C. BANG, “Direct Observation of Dryout Processes of Thin Liquid Films and Al2O3 Nano-Fluid Performance in Boiling Crisis,” Doctoral Thesis, Nuclear and Quantum Engineering, KoreaAdvanced Institute of Science and Technology (2004).
   Google Scholar
• S. VAFAEI et al., “Effect of Nanoparticles on Sessile Droplet Contact Angle,” Nanotechnology, 17, 2523 (2006).
   PubMed Web of Science ®Google Scholar
• R. N. WENZEL, “Surface Roughness and Contact Angle,” J. Phys. Coll. Chem., 53, 9, 1466 (1949).
   Google Scholar
• S. G. KANDLIKAR, “ATheoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and Orientation,” J. Heat Transfer, 123, 1071 (2001).
   Web of Science ®Google Scholar
• G. W. YANG, “Laser Ablation in Liquids: Applications in the Synthesis of Nanocrystals,” Prog. Mater. Sci., 52, 648 (2007).
   Web of Science ®Google Scholar
• Y. J. CHOO, S. Y. CHUN, J. K. PARK, C. H. SONG, and I. C. BANG, “Experimental Study on Boiling Heat Transfer Using Standard Nanofluids,” presented at 7th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics, Operation and Safety, Seoul, Korea, October 5–9, 2008.
   Google Scholar
• “PWR Axial Offset Anomaly (AOA) Guidelines,” EPRI Report 1003213, Rev. 1, Electric Power Research Institute (Oct. 2003).
   Google Scholar