Seismic Isolation for Advanced Fast Reactors

REFERENCES

• R. S. JANGID and T. K. DATTA, “Seismic Behavior of Base-Isolated Buildings: A State-of-the-Art Review,” Struct. Buildings, 110, 186 (1995).
   Web of Science ®Google Scholar
• A. MARTELLI, “Modern Seismic Protection Systems for Civil and Industrial Structures,” Structural Assessment, Monitoring and Control (2006).
   Google Scholar
• J. M. KELLY, “Base Isolation: Linear Theory and Design,” Earthquake Spectra, 6, 2, 223 (1990).
   Google Scholar
• Concrete Structures in Earthquake Regions: Design and Analysis, E. BOOTH, Ed., Longman Scientific & Technical (1994).
   Google Scholar
• J. M. KELLY, Earthquake Resistant Design with Rubber, 2nd ed., Springer (1997).
   Google Scholar
• R. I. SKINNER, W. H. ROBINSON, and G. H. McVERRY, An Introduction to Seismic Isolation, John Wiley&Sons (1993).
   Google Scholar
• F. NAEIM and J. M. KELLY, Design of Seismic Isolated Structures: From Theory to Practice, John Wiley&Sons (1999).
   Google Scholar
• P. KOMODROMOS, Seismic Isolation for Earthquake Resistant Structures, WIT Press (2000).
   Google Scholar
• The Seismic Design Handbook, 2nd ed., Z. SHI and F. NAEIM, Eds., Springer (2001)
   Google Scholar
• NEHRP Recommended Provisions: Design Examples, FEMA 451 (Aug. 2006).
   Google Scholar
• I. G. BUCKLE and R. L. MAYES, “Seismic Isolation: History, Application, and Performance—A World View,” Earthquake Spectra, 6, 2, 161 (1990).
   Google Scholar
• N. KANI, “Current State of Seismic Isolation Design,” J. Disaster Res., 4, 3, 175 (2009).
   Google Scholar
• R. GUERAUD et al., “Seismic Isolation Using Sliding-Elastomer Bearing Pads,” Nucl. Eng. Des., 84, 363 (1985).
   Web of Science ®Google Scholar
• T. E. KELLY, “Base Isolation Structures—Design Guidelines,” Holmes Consulting Group Ltd. (July 2001).
   Google Scholar
• P. W. CLARK, I. D. AIKEN, and J. M. KELLY, “Ongoing Studies of the Foothill Communities Law and Justice Center,” Proc. Structures Congress XV, Portland, Oregon, April 1997.
   Google Scholar
• A. G. TARICS, D. WAY, and J. M. KELLY, “The Implementation of Base Isolation for the Foothill Communities Law and Justice Center, County of San Bernardino, California,” Report to the National Science Foundation and the County of San Bernardino, Reid and Tarics Associates (Nov. 1984).
   Google Scholar
• F. F. TAJIRIAN and M. R. SCHRAG, “Conceptual Design of Seismic Isolation for the PRISM Liquid Metal Reactor,” Proc. SMiRT-9 Conf., Lausanne, 1987.
   Google Scholar
• J. M. KELLY and S. B. HODDER, “Experimental Study of Lead and Elastomeric Dampers for Base Isolation Systems in Laminated Neoprene Bearings,” Bull. New Zealand Natl. Soc. Earthquake Eng., 15, 2, 53 (1982).
   Google Scholar
• Wikipedia Web Site: http://en.wikipedia.org/wiki/Teflon ( current as of October 26, 2009).
   Google Scholar
• V. A. ZAYAS, S. S. LOW, and S. A. MAHIN, “The FPS Earthquake Resisting System: Experimental Report,” UCB/EERC-87/01, University of California, Berkeley, Earthquake Engineering Center (June 1987).
   Google Scholar
• V. A. ZAYAS et al., “Feasibility and Performance Studies on Improving the Earthquake Resistance of New and Existing Buildings Using the Friction Pendulum System,” UCB/EERC-89/09, University of California, Berkeley, Earthquake Engineering Center (Sep. 1989).
   Google Scholar
• K. L. RYAN and A. K. CHOPRA, “Estimating the Seismic Displacement of Friction Pendulum Isolators Based on Non-Linear Response History Analysis,” Earthquake Eng. Struct. Dynam., 33, 359 (2004).
   Google Scholar
• A. MOKHA, M. C. CONSTANTINOU, A. M. REINHORN, and V. A. ZAYAS, “Experimental Study of Friction Pendulum Isolation System,” J. Struct. Eng., 117, 1201 (1991).
   Web of Science ®Google Scholar
• R. CHIANG, “Application of Multiple Friction Pendulum System in Seismic Engineering,” PhD Dissertation, Feng Chai University, Department of Civil Engineering, Taiwan (2004) (in Chinese).
   Google Scholar
• M. C. CONSTANTINOU, “Friction Pendulum Double Concave Bearing,” State University of New York, Buffalo (Oct. 29, 2004).
   Google Scholar
• C. S. TSAI et al., “An Improved FPS Isolator for Seismic Mitigation on Steel Structures,” Proc. Pressure Vessels and Piping Conf., Vancouver, Canada, 2002, pp. 237–244, American Society of Mechanical Engineers (2002).
   Google Scholar
• C. S. TSAI et al., “Shaking Table Tests of a Full Scale Steel Structure Isolated with MFPS,” Proc. Pressure Vessels and Piping Conf., pp. 41–47, American Society of Mechanical Engineers (2003).
   Google Scholar
• C. S. TSAI et al., “Component and Shaking Table Tests for Full-Scale Multiple Friction Pendulum System,” Earthquake Eng. Struct. Dynam., 35, 1653 (2006).
   Web of Science ®Google Scholar
• D. M. FENZ and M. C. CONSTANTINOU, “Behavior of the Double Concave Friction Pendulum Bearings,” Earthquake Eng. Struct. Dynam., 35, 1403 (2006).
   Web of Science ®Google Scholar
• D. M. FENZ and M. C. CONSTANTINOU, “Spherical Sliding Isolation Bearing with Adaptive Behavior: Theory,” Earthquake Eng. Struct. Dynam., 37, 163 (2008).
   Google Scholar
• D. M. FENZ and M. C. CONSTANTINOU, “Modeling Triple Friction Pendulum Bearings for Response History Analysis,” Earthquake Spectra, 24, 1011 (2008).
   Google Scholar
• D. M. FENZ and M. C. CONSTANTINOU, “Spherical Sliding Isolation Bearing with Adaptive Behavior: Experimental Verification,” Earthquake Eng. Struct. Dynam., 37, 185 (2008).
   Google Scholar
• F. FADI and M. C. CONSTANTINOU, “Evaluation of Simplified Methods of Analysis for Structures with Triple Friction Pendulum Isolators,” Earthquake Eng. Struct. Dynam., 39, 5 (2010).
   Google Scholar
• I. POLITOPOULOS, “A Review of Adverse Effects of Damping in Seismic Isolation,” Earthquake Eng. Struct. Dynam., 37, 447 (2008).
   Google Scholar
• Proc. Specialists’ Meeting on Seismic Isolation Technology, San Jose, California, 1992, IWGFR-87, International Atomic Energy Agency (1992).
   Google Scholar
• K. N. G. FULLER et al., “Intercomparison of Analysis Methods for Seismically Isolated Nuclear Structures,” Proc. Workshop on the Seismic Re-evaluation of all Nuclear Facilities, Ispra, Italy, March 26–27, 2001, NEA/CSNI/R (2001)13/VOL 4.
   Google Scholar
• J. M. KELLY, “State-of-the-Art and State-of-the-Practice in Base Isolation,” Proc. Seminar on Seismic Isolation, Passive Energy Dissipation, and Active Control (ATC-17-1), San Francisco, California, March 1993, Applied Technology Council (1993).
   Google Scholar
• R. G. TYLER, “Dynamic Test of PFTE Sliding Layers Under Earthquake Conditions,” Bull. New Zealand Natl. Soc. Earthquake Eng., 10, 129 (1977).
   Google Scholar
• E. GLUEKIER and S. AOYAGI, “Meeting Summary Discussion and Recommendations,” Proc. Specialists’Meeting on Seismic Isolation Technology, San Jose, California, pp. 31–32, International Atomic Energy Agency (1992).
   Google Scholar
• A. MOKHA, M. C. CONSTANTINOU, and A. M. REINHORN, “Teflon Bearing in Base Isolation. Part 1: Testing,” J. Struct. Eng., 116, 2, 438 (1990).
   Web of Science ®Google Scholar
• M. C. CONSTANTINOU, A. M. MOKHA, and A. M. REINHORN, “Teflon Bearing in Base Isolation. Part 2,” J. Struct. Eng., 116, 2, 455 (1990).
   Web of Science ®Google Scholar
• M. C. CONSTANTINOU, A. M. MOKHA, and A. M. REINHORN, “PTFE Bearings in Base Isolation: Modeling,” J. Earthquake Eng., 116, 455 (1990).
   Google Scholar
• A. M. MOKHA, M. C. CONSTANTINOU, and A. M. REINHORN, “Verification of Friction Model of PTFE Bearings Under Triaxial Load,” J. Struct. Eng., 119, 240 (1993).
   Web of Science ®Google Scholar
• C. S. TSAI, “Seismic Behavior of Building with FPS Isolators,” Proc. Second Congress on Computing in Civil Engineering, 1995, pp. 1203–1211.
   Google Scholar
• C. S. TSAI, “FEM with Local Effects for Flat Sliding System,” Comput. Struct., 61, 1003 (1996).
   Google Scholar
• C. S. TSAI, “Finite Element Formulations for Friction Pendulum Seismic Isolation Bearings,” Int. J. Numer. Methods Eng., 40, 29 (1997).
   Web of Science ®Google Scholar
• J. L. ALMAZAN, J. C. DE LA LLERA, and J. A. INAUDI, “Modeling Aspects of Structures Isolated with the Frictional Pendulum System,” Earthquake Eng. Struct. Dynam., 27, 845 (1998).
   Web of Science ®Google Scholar
• J. L. ALMAZAN and J. C. DE LA LLERA, “Analytical Model for Structures with Frictional Pendulum Isolators,” Earthquake Eng. Struct. Dynam., 31, 305 (2002).
   Web of Science ®Google Scholar
• J. L. ALMAZAN, and J. C. DE LA LLERA, “Physical Model for Dynamic Analysis of Structures with FPS Isolators,” Earthquake Eng. Struct. Dynam., 32, 1157 (2003).
   Google Scholar
• A. MOKHA, A. NAVINCHANDRA, M. C. CONSTANTINOU, and V. ZAYAS, “Seismic Isolation Retrofit of Large Historic Building,” J. Struct. Eng., 122, 298 (1996).
   Web of Science ®Google Scholar
• A. MOKHA, M. C. CONSTANTINOU, and A. M. REINHORN, “Further Results on the Frictional Properties of Teflon Bearings,” J. Struct. Eng., 117, 622 (1991).
   Google Scholar
• Primer on Seismic Isolation, A. W. TAYLOR and T. IGUSA, Eds., American Society of Civil Engineers (2004).
   Google Scholar
• T. SOMAKI et al., “Development of 3-Dimensional Base Isolation System for Nuclear Power Plants,” Trans. SMiRT 16 Conf., Washington, D.C., August 2001, paper 1015.
   Google Scholar
• S. KITAMURA and M. MORISHITA, “Design Method of Vertical Component Isolation System,” Trans. SMiRT 16 Conf., Washington, D.C., August 2001, paper 1264.
   Google Scholar
• A. KASHIWAZAKI et al., “Study on 3-Dimensional Base Isolation System Applying to New Type Power Plant Reactor,” Trans. SMiRT 17 Conf., Prague, Czech Republic, August 2003, paper K09-2.
   Google Scholar
• S. OGISO et al., “Development of 3D Seismic Isolator Using Metallic Bellows,” Trans. SMiRT 17 Conf., Prague, Czech Republic, August 2003, paper K09-3.
   Google Scholar
• J. SUHARA et al., “Research on 3-D Base Isolation System Applied to New Power Reactor 3-D Seismic Isolation Device with Rolling Seal Type Air Spring: Part 1,” Trans. SMiRT 17 Conf., Prague, Czech Republic, August 2003, paper K09-4.
   Google Scholar
• M. KAGEYAMA et al., “Development of Three-Dimensional Base Isolation System with Cable Reinforcing Air Spring,” Trans. SMiRT 17 Conf., Prague, Czech Republic, August 2003, paper K09-5.
   Google Scholar
• M. MORISHITA et al., “Structure of a 3-Dimensional Seismic Isolated FBR Plant withVertical Component Isolation System,” Trans. SMiRT 17 Conf., Prague, Czech Republic, August 2003, paper K10-1.
   Google Scholar
• Y. ARAKI, T. ASAI, and T. MASUI, “Vertical Vibration Isolator Having Piecewise-Constant Restoring Force,” Earthquake Eng. Struct. Dynam., 38, 1505 (2009).
   Google Scholar
• J. M. KELLY and H.-C. TSAI, “Seismic Response of Light Internal Equipment in Base Isolated Structures,” Earthquake Eng. Struct. Dynam., 13, 711 (1985).
   Google Scholar
• J. A. INAUDI and J. M. KELLY, “Optimal Damping in Linear Isolation Systems,” Earthquake Eng. Struct. Dynam., 22, 583 (1993).
   Google Scholar
• “Seismic Isolation: Studies for Liquid Metal Fast Breeder Plants,” Burns and Roe Inc. (1983).
   Google Scholar
• R. E. BACHMAN, “Base Isolation: A New Concept for Earthquake Resistant Design,” National Council for Structural Engineering Associations (Spring 1995).
   Google Scholar
• A. H. HADJIAN and W. S. TSENG, “Issues in Seismic Isolation of Nuclear Power Plants,” Nucl. Eng. Des., 84, 433 (1985).
   Web of Science ®Google Scholar
• R. L. MAYES, “Ronald L. Mayes,” J. Struct. Des. Tall Special Buildings, 16, 3 (2007).
   Google Scholar
• Y. W. CHANG et al., “Preface,” Proc. First Int. Seminar on Seismic Base Isolation for Nuclear Power Facilities, August 21–22, 1989, San Francisco, California.
   Google Scholar
• C. C. THIEL, Jr., “Life Cycle Cost Considerations in Structural System Selection: Conventional Versus Base Isolation Design Options,” Proc. Seminar on Seismic Isolation and Passive Energy Dissipation (ATC-17), San Francisco, California, March 1986, Applied Technology Council (1986).
   Google Scholar
• “Seismically Isolated Buildings in the United States,” University of California, Berkeley, Web Site: http://nisee.berkeley.edu/prosys/usbldgs.html (current as of October 26, 2009).
   Google Scholar
• D. J. TRUMMER and S. C. SOMMER, “Overview of Seismic Base Isolation Systems, Applications, and Performance During Earthquakes,” Proc. Fourth Natural Phenomena Hazard Mitigation Conf., Atlanta, Georgia, 1993, pp. 318–327, U.S. Department of Energy (1993).
   Google Scholar
• Earthquake Protection Systems Web Site: http://www.earthquakeprotection.com/index.html (current as of October 26, 2009).
   Google Scholar
• F. F. TAJIRIAN and J. M. KELLY, “Seismic Isolation on Nuclear Plants: A World Overview,” Proc. Structural Congress, San Francisco, California, American Society of Civil Engineers (1988).
   Google Scholar
• S. R. MALUSHTE and A. S. WHITTAKER, “Survey of Past Base Isolation Applications in Nuclear Power Plants and Challenges to Industry/Regulatory Acceptance,” Proc. SMiRT 18, Beijing, China, 2005, pp. 3404–3410.
   Google Scholar
• J. M. EIDINGER and J. M. KELLY, “Seismic Isolation for Nuclear Power Plants: Technical and Non-Technical Aspects in Decision Making,” Nucl. Eng. Des., 84, 383 (1985).
   Web of Science ®Google Scholar
• “A Review of Seismic Isolation for Nuclear Structures,” NP-1220-SR, Electric Power Research Institute (1979).
   Google Scholar
• R. W. SEIDENSTICKER, “R&D Activities at Argonne National Laboratory for the Application of Base Seismic Isolation in Nuclear Facilities,” Proc. Second Int. Seminar on Seismic Isolation of Nuclear and Non-Nuclear Structures, 1991.
   Google Scholar
• “Preapplication Safety Evaluation Report for the Power Reactor Innovative Small Module (PRISM) Liquid-Metal Reactor,” NUREG-1368, U.S. Nuclear Regulatory Commission (1994).
   Google Scholar
• F. F. TAJIRIAN, J. M. KELLY, and I. D. AIKEN, “Seismic Isolation for Advanced Nuclear Power Stations,” Earthquake Spectra, 6, 2, 371 (1990).
   Google Scholar
• S. C. SOMMER, “Potential Role of Seismic Base Isolation in the DOE,” Proc. Fourth Natural Phenomena Hazards Mitigation Conf., pp. 328–338, U.S. Department of Energy (1993).
   Google Scholar
• “Technology Transfer Package on Seismic Base Isolation,” CONF-9205413, Lawrence Livermore National Laboratory (1995).
   Google Scholar
• “Intercomparison of Analysis Methods for Seismically Isolated Nuclear Structures (I),” IWGFR-93, International Atomic Energy Agency (1996).
   Google Scholar
• “Intercomparison of Analysis Methods for Seismically Isolated Nuclear Structures (II),” IWGFR-94, International Atomic Energy Agency (1996).
   Google Scholar
• “Intercomparison of Analysis Methods for Seismically Isolated Nuclear Structures, 3rd Research Coordination Meeting,” IWGFR-96, International Atomic Energy Agency (1998).
   Google Scholar
• “Verification of Analysis Methods for Predicting the Behavior of Seismically Isolated Nuclear Structures,” IAEA-TECDOC-1288, International Atomic Energy Agency (June 2002).
   Google Scholar
• Wikipedia Web Site: http://en.wikipedia.org/wiki/Toshiba_4S (current as of October 26, 2009).
   Google Scholar
• “Minimum Design Loads for Buildings and Other Structures,” ASCE 7-05, American Society of Civil Engineers (2006).
   Google Scholar
• I. POLITOPOULOS, “Response of Seismic Isolated Structures to Rocking-Type Excitations,” Earthquake Eng. Struct. Dynam., 39, 325 (2010).
   Google Scholar
• “Seismic Analysis of Safety-Related Nuclear Structures and Commentary,” ASCE 4-98, American Society of Civil Engineers (2000)
   Google Scholar
• V. PRAKASH et al., “DRAIN-2D, Static and Dynamic Analysis of Inelastic Plane Structures, Base Program Description and User Guide: Version 1.10,” UCB/SEMM-1993/17, University of California, Berkeley, Department of Civil Engineering (1993).
   Google Scholar
• D. P. MONDKAR and G. H. POWELL, “ANSR-1: General Purpose Program for Analysis of Nonlinear Structural Response,” UCB/EERC-75/37, University of California, Berkeley, Earthquake Engineering Research Center (1975).
   Google Scholar
• P. TSOPELAS et al., “3D-BASIS-ME: Nonlinear Dynamic Analysis of Seismically Isolated Single and Multiple Structures,” 94-0010, National Center for Earthquake Engineering Research, Buffalo, New York (1994).
   Google Scholar
• A. J. CARR, “RUAUMOKO Program for Inelastic DynamicAnalysis,” University of Canterbury, Department of Civil Engineering, Christchurch, New Zealand (2004).
   Google Scholar
• H. W. SHENTON, “Guidelines for Pre-Qualification, Prototype and Quality Control Testing of Seismic Isolation Systems,” NISTR 5800, National Institute of Standards and Technology, Structures Division, Building and Fire Research Laboratory, Gaithersburg, Maryland (1996).
   Google Scholar
• I. D. AIKEN, “Testing of Seismic Isolators and Dampers: Considerations and Limitations,” Proc. Structural Engineering World Congress, San Francisco, California, 1998.
   Google Scholar
• J. W. ASHER et al., “Seismic Performance of the Base-Isolated USC University Hospital in the 1994 Northridge Earthquake,” Proc. Joint ASME/JSME Pressure Vessel and Piping Conf., Seismic Shock and Vibration Isolation, Honolulu, Hawaii, 1995, Vol. PVP, No. 319, pp. 147–154, American Society of Mechanical Engineers (1995).
   Google Scholar
• P. W. CLARK, H. MASAHIKO, and J. M. KELLY, “Performance of Seismically Isolated Structures in the January 17, 1994, Northridge Earthquake,” Proc. Sixth U.S.-Japan Workshop on the Improvement of Building Structural Design and Construction Practices in the United States and Japan, Victoria, B.C., Canada, ATC-15-5, Applied Technology Council and Japan Structural Consultants Association (1996).
   Google Scholar
• “Chile LNG Storage Tanks, Quintero, Chile,” Earthquake Protection Systems (May 2010).
   Google Scholar
• P. W. CLARK et al., “New Design Technology: The 1995 Kobe (Hyogo-Ken Nanbu) Earthquake as a Trigger for Implementing New Seismic Design Technologies in Japan,” Lesson Learned over Time: Learning from Earthquakes, Vol. III, Earthquake Engineering Research Institute (1999).
   Google Scholar
• Proc. EPRI/NRC/TPC Workshop on Seismic Soil-Structure Interaction Analysis Techniques Using Data from Lotung, Taiwan, EPRI NP-6154, Electric Power Research Institute (1989).
   Google Scholar