Pressure Drop in a Pebble Bed Reactor Under High Reynolds Number

References

• ERGUN S., “Fluid Flow Through Packed Columns,” Chem. Eng. Prog., 48, 89 (1952).
   Web of Science ®Google Scholar
• EISFELD B. and SCHNITZLEIN K., “The Influence of Confining Walls on the Pressure Drop in Packed Beds,” Chem. Eng. Sci., 56, 4321 (2001).
   Web of Science ®Google Scholar
• ANDERSSON K. E. B., “Pressure Drop in Packed Beds,” Trans. R. Inst. Technol. Stockholm, 201 (1963).
   Google Scholar
• CARMAN P. C., “Fluid Flow Through a Granular Bed,” Trans. Inst. Chem. Eng., 15, 150 (1937).
   Google Scholar
• COULSON J. M., “The Flow of Fluids Through Granular Beds: Effect of Particle Shape and Voids in Streamline Flow,” Trans. Inst. Chem. Eng., 27, 237 (1949).
   Google Scholar
• MEHTA D. and HAWLEY M. C., “Wall Effect in Packed Columns,” Ind. Eng. Chem. Process Design Dev., 8, 280 (1969).
   Google Scholar
• FOUMENY E. A. et al., “Correlations of Pressure Drop in Packed Beds Taking into Account the Effect of Confining Wall,” Int. J. Heat Mass Transfer, 36, 536 (1993).
   Web of Science ®Google Scholar
• LEVA M., “Pressure Drop Through Packed Tubes,” Chem. Eng. Prog., 43, 549 (1947).
   Web of Science ®Google Scholar
• SONNTAG G., “Einfluß des Lückenvolumens auf den Druckverlust in Gasdurchströmten Füllkörpersäulen,” Chem. Ing. Tech., 32, 317 (1960).
   Google Scholar
• HICKS R. E., “Pressure Drop in Packed Beds of Spheres,” Ind. Eng. Chem. Fundam., 9, 500 (1970).
   Web of Science ®Google Scholar
• REICHELT W., “Zur Berechnung des Druckverlustes Einphasig Durchströmter Kugel und Zylinderschüttungen,” Chem. Ing. Tech., 44, 1068 (1972).
   Web of Science ®Google Scholar
• MACDONALD I. F. et al., “Flow Through Porous Media—The Ergun Equation Revisited,” Ind. Eng. Chem. Fundam., 18, 3, 199 (1979).
   Web of Science ®Google Scholar
• “Reactor Core Design of High-Temperature Gas-Cooled Reactors, Part 3: Loss of Pressure Through Friction in Pebble Bed Cores,” KTA 3102.3, Nuclear Safety Standards Commission (Mar. 1981).
   Google Scholar
• FAND R. M. and THINAKARAN R., “The Influence of the Wall on Flow Through Pipes Packed with Spheres,” J. Fluids Eng., 112, 84 (1990).
   Web of Science ®Google Scholar
• COMITI J. and RENAUD M., “A New Model for Determining Mean Structure Parameters of Fixed Beds from Pressure Drop Measurements: Application to Beds Packed with Parallelepipedal Particles,” Chem. Eng. Sci., 44, 1539 (1989).
   Web of Science ®Google Scholar
• LIU S., AFACAN A., and MASLIYAH J., “Steady Incompressible Laminar Flow in Porous Media,” Chem. Eng. Sci., 49, 3565 (1994).
   Web of Science ®Google Scholar
• HAYES R. E., AFACAN A., and BOULANGER B., “An Equation of Motion for an Incompressible Newtonian Fluid in a Packed Bed,” Transp. Porous Media, 18, 185 (1995).
   Web of Science ®Google Scholar
• NIVEN R. K., “Physical Insight into the Ergun and Wen & Yu Equations for Fluid Flow in Packed and Fluidised Beds,” Chem. Eng. Sci., 57, 527 (2002).
   Web of Science ®Google Scholar
• DI FELICE R. and GIBILARO L. G., “Wall Effects for the Pressure Drop in Fixed Beds,” Chem. Eng. Sci., 59, 3037 (2004).
   Web of Science ®Google Scholar
• MONTILLET A., “Flow Through a Finite Packed Bed of Spheres: A Note on the Limit of Applicability of the Forchheimer-Type Equation,” J. Fluids Eng., 126, 139 (2004).
   Web of Science ®Google Scholar
• ROSE H. E. and RIZK A. M. A., “Further Researches in Fluid Flow Through Beds of Granular Material,” Proc. Inst. Mech. Eng., 60, 493 (1949).
   Google Scholar
• WU J., YU B., and YUN M., “A Resistance Model for Flow Through Porous Media,” Transp. Porous Media, 71, 331 (2008).
   Web of Science ®Google Scholar
• HANDLEY D. and HEGGS P. J., “Momentum and Heat Transfer Mechanisms in Regular Shaped Packings,” Trans. Inst. Chem. Eng., 46, T251 (1968).
   Google Scholar
• YU J. et al., “Study on Performance of the Ball Packed Bed Regenerator: Experiments and Simulation,” Appl. Therm. Eng., 22, 641 (2002).
   Web of Science ®Google Scholar
• WENTZ C. A. and THODOS G., “Pressure Drops in the Flow of Gases Through Packed and Distended Beds of Spherical Particles,” AIChE J., 9, 81 (1963).
   Web of Science ®Google Scholar
• TALLMADGE J. A., “Packed Bed Pressure Drop—An Extension to Higher Reynolds Numbers,” AIChE J., 16, 1092 (1970).
   Web of Science ®Google Scholar
• BRAUER H.. “Eigenschaften der Zweiphasen-Strömung bei der Rektifikation in Füllkörpersäulen,” in Fortschritte der Destilliertechnik. Forschungsarbeiten aus dem Max-Planck Institut für Strömungsforschung Göttingen, Dechema Monographien,” BRETSCHNEIDER H., Ed., VCH, Weinherm, 37, 7 (1960).
   Google Scholar
• FOSCOLO P. U., GIBILARO L. G., and WALDRAM S. P., “A Unified Model for Particulate Expansion of Fluidized Beds and Flow in Fixed Porous Media,” Chem. Eng. Sci., 38, 1251 (1983).
   Web of Science ®Google Scholar
• MORCOM A. R., “Fluid Flow Through Granular Materials,” Trans. Inst. Chem. Eng., 24, 30 (1946).
   Google Scholar
• BEAVERS G. S., SPARROW E. M., and RODENZ D. E., “Influence of Bed Size on the Flow Characteristics and Porosity of Randomly Packed Beds of Spheres,” J. Appl. Mech., 40, 655 (1973).
   Web of Science ®Google Scholar
• CHU C. F. and NG K. M., “Flow in Packed Tubes with a Small Tube to Particle Diameter Ratio,” AIChE J., 35, 148 (1989).
   Web of Science ®Google Scholar
• SATO Y. et al., “Pressure Loss and Liquid Hold-Up in Packed Reactor with Concurrent Gas-Liquid Downflow,” J. Chem. Eng. Jpn., 6, 147 (1973).
   Google Scholar
• ZOU R. P. and YU A. B., “The Packing of Spheres in a Cylindrical Container: The Thickness Effect,” Chem. Eng. Sci., 50, 1504 (1995).
   Web of Science ®Google Scholar
• KLINE S. J. and McCLINTOCK F. A., “Describing Uncertainties in Single Sample Experiments,” Mech. Eng., 75, 3 (1953).
   Google Scholar