85
Views
0
CrossRef citations to date
0
Altmetric
Technical Paper

Coupled DNS/RANS Simulation of Fission Gas Discharge during Loss-of-Flow Accident in Generation IV Sodium Fast Reactor

, , , , &
Pages 44-55 | Published online: 10 Aug 2017

References

  • I. A. Bolotnov et al., “Multiscale Computer Simulation of Fission Gas Discharge During Loss-of-Flow Accident in Sodium Fast Reactor,” Proc. Organisation for Economic Co-operation and Development/Nuclear Energy Agency and International Atomic Energy Agency Workshop on Experimental Validation and Application of CFD and CMFD Codes to Nuclear Reactor Safety Issues (CFD4NRS-3), Washington, D.C., September 14–16, 2010.
  • C. H. Whiting and K. E. Jansen, “A Stabilized Finite Element Formulation for the Incompressible Navier-Stokes Equations Using a Hierarchical Basis,” Int. J. Numer. Methods Fluids, 35, 93 (2001).
  • K. E. Jansen, C. H. Whiting, and G. M. Hulbert, “A Generalized-Alpha Method for Integrating the Filtered Navier-Stokes Equations with a Stabilized Finite Element Method,” Computer Methods Appl. Mech. Eng., 190, 3–4, 305 (2000).
  • O. Sahni et al., “Efficient Anisotropic Adaptive Discretization of the Cardiovascular System,” Computer Methods Appl. Mech. Eng., 195, 41–43, 5634 (2006).
  • A. E. Tejada-Martinez and K. E. Jansen, “A Parametric-Free Dynamic Subgrid-Scale Model for Large-Eddy Simulation,” Computer Methods Appl. Mech. Eng., 194, 9, 1225 (2005).
  • J. A. Sethian, Level Set Methods and Fast Marching Methods, Cambridge University Press (1999).
  • S. Nagrath, K. E. Jansen, and R. T. Lahey, “Computation of Incompressible Bubble Dynamics with a Stabilized Finite Element Level Set Method,” Computer Methods Appl. Mech. Eng., 194, 4565 (2005).
  • I. A. Bolotnov et al., “Detached Direct Numerical Simulation of Turbulent Two-Phase Bubbly Channel Flow,” Int. J. Multiphase Flow, 37, 647 (2011).
  • S. P. Antal et al., “Development of a Next Generation Computer Code for the Prediction of Multicomponent Multiphase Flows,” Proc. Int. Mtg. Trends in Numerical and Physical Modeling for Industrial Multiphase Flow, Cargese, France, 2000.
  • T. Gallaway, S. P. Antal, and M. Z. Podowski, “Multidimensional Model of Fluid Flow and Heat Transfer in Generation-IV Supercritical Water Reactors,” Nucl. Eng. Des., 238, 1909 (2008).
  • B. Z. Wierzbicki, S. P. Antal, and M. Z. Podowski, “On the Modeling of Gas Bubble Evolution and Transport Using Coupled Level-Set/CFD Method,” Nucl. Technol., 158, 261 (2007).
  • E. A. Tselishcheva, S. P. Antal, and M. Z. Podowski, “Mechanistic Multidimensional Analysis of Horizontal Two-Phase Flows,” Nucl. Eng. Des., 240, 405 (2010).
  • E. A. Tselishcheva et al., “Analysis of Developing Gas/Liquid Two-Phase Flows,” Proc. 7th Int. Conf. Multiphase Flow (ICMF-2010), Tampa, Florida, May 30–June 4, 2010.
  • P. Tiwari, S. P. Antal, and M. Z. Podowski, “ThreeDimensional Fluid Mechanics of Particulate Two-Phase Flows in U-bend and Helical Conduits,” Phys. Fluids, 18, 4, 1 (2006).
  • P. Tiwari, S. P. Antal, and M. Z. Podowski, “Modeling Shear-Induced Diffusion Force in Particulate Flows,” Computers and Fluids, 38, 727 (2009).
  • I. A. Bolotnov et al., “Interaction of Computational Tools for Multiscale Multiphysics Simulation of Generation-IV Reactors,” Proc. 2010 Int. Congress Advances inNuclear Power Plants (ICAPP’10), San Diego, California, June 13–17, 2010, American Nuclear Society (2010) (CD-ROM).
  • I. A. Bolotnov et al., “Multidimensional Analysis of Fission Gas Discharge Following Fuel Element Failure in Sodium Fast Reactor,” Nucl. Eng. Des., 247, 136 (2012).
  • J. U. Brackbill, D. B. Kothe, and C. Zemach, “A Continuum Method for Modeling Surface Tension,” J. Comput. Phys., 100, 2, 335 (1992).
  • A. V. Trofimova et al., “Direct Numerical Simulation of Turbulent Channel Flows Using a Stabilized Finite Element Method,” Computers and Fluids, 38, 924 (2009).
  • C. C. Maneri and N. Zuber, “An Experimental Study of Plane Bubbles Rising at Inclination,” Int. J. Multiphase Flow, 1, 623 (1974).
  • D. R. Shaver, S. P. Antal, and M. Z. Podowski, “Multidimensional Modeling of Interfacial Boiling and Condensation,” Trans. Am. Nucl. Soc., 105, 1040 (2011).
  • F. Behafarid et al., “Two Phase Cross Jet in a Fuel Rod Assembly Using DNS/Level-Set Method,” Proc. 7th Int. Conf. Multiphase Flow (ICMF-2010), Tampa, Florida, May 30–June 4, 2010.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.