63
Views
0
CrossRef citations to date
0
Altmetric
Technical Paper

Three-Dimensional Modeling of Debris Mixing and Sedimentation in Severe Accidents Using the Moving Particle Semi-Implicit Method Coupled with Rigid Body Dynamics

, , &
Pages 227-239 | Published online: 10 Aug 2017

References

  • N. Reinke et al., “Formation Characterization and Cooling of Debris—Scenario Discussion with Emphasis on TMI-2,” Nucl. Eng. Des, 236, 1955 (2006).
  • D. Magallon, “Characteristics of Corium Debris Beds Generated in Large-Scale Fuel Coolant Interaction Experiments,” Nucl. Eng. Des., 236, 1998 (2006).
  • M. Bürger et al., “Coolability of Particulate Beds in Severe Accidents: Status and Remaining Uncertainties,” Prog. Nucl. Energy, 52, 1, 61 (2010).
  • M. L. Corradini, B. J. Kim, and M. D. Oh, “Vapor Explosions in Light Water Reactors: A Review of Theory and Modelling,” Prog. Nucl. Energy, 22, 1 (1988).
  • K. Aziz and A. Settari, Petroleum Reservoir Simulation. Applied Science Publishers (1979).
  • L. Li et al., “An Experimental Study on Dryout Heat Flux of Particulate Beds Packed with Irregular Particles,” Proc. Int. Congress Advances in Nuclear Power Plants (ICAPP 2011), Nice, France, May 2-6, 2011, p. 11185 (2011).
  • S. Yakush and P. Kudinov, “Effects of Water Pool Subcooling on the Debris Bed Spreading by Coolant Flow,” Proc. Int. Congress Advances in Nuclear Power Plants (ICAPP 2011), Nice, France, May 2-6, 2011, p. 11416 (2011).
  • Z. Chen, G. Huan, and Y. Ma, Computational Methods for Multiphase Flows in Porous Media, SIAM (2006).
  • E. G. Flekkøy, G. Wagner, and J. Feder, “Hybrid Model for Combined Particle and Continuum Dynamics,” Europhys. Lett., 52, 3, 271 (2000).
  • C. T. Crowe, M. Sommerfeld, and Y. Tsuji. Multiphase Flows with Droplets and Particles, CRC Press (1998).
  • S. Park, H. S. Park, and G. Jeun, “Simulation of QUEOS Experiment Using Rigid Dynamic-Moving Particle Semi-implicit (RD-MPS) Method,” Trans. Korean Nucl. Soc., Spring Mtg., Taebaek, Korea, May 26-27, 2011.
  • L. Meyer and G. Schumacher, “QUEOS, A Simulation-Experiment of the Premixing Phase of a Steam Explosion with Hot Spheres in Water, Base Case Experiments,” FZKA 5612, Forschungszentrum Karlsruhe, Technik und Umwelt (1996).
  • L. Meyer, “QUEOS, A Simulation-Experiment of the Premixing Phase of a Steam Explosion with Hot Spheres in Water, Results of the Second Test Series,” Internal Report 32.21.02/INR1962/PSF3267, Forschungszentrum Karlsruhe, Technik und Umwelt (1997).
  • G. Berthoud and M. Valette, “Development of a Multidimensional Model for the Premixing Phase of a Fuel-Coolant Interaction,” Nucl. Eng. Des., 149, 409 (1994).
  • L. Meyer et al., “Investigation of the Premixing Phase of a Steam Explosion with Hot Spheres,” Nucl. Technol., 123, 142 (1998).
  • T. G. Theofanous, W. W. Yuen, and S. Angelini, “The Verification Basis of the PM-ALPHA Code,” Nucl. Eng. Des., 189, 59 (1999).
  • N. I. Kolev, “Verification of IVA5 Computer Code for Melt-Water Interaction Analysis,” Proc. 7th Int. Conf. Nuclear Engineering, Tokyo, Japan, April 19-23, 1999.
  • R. R. Nourgaliev et al., “The Multiphase Eulerian-Lagrangian Transport (MELT-3D) Approach for Modeling of Multiphase Mixing in Fragmentation Processes,” Prog. Nucl. Energy, 42, 123 (2003).
  • Q. Lin and X. Cao. “Simulation of the Mixing Process in FCIs with Hydrodynamic Fragmentation Model,” Nucl. Sci. Technol, 18, 4, 242 (2007).
  • S. Koshizuka and Y. Oka, “Moving-Particle Semi-Implicit Method for Fragmentation of Incompressible Fluid,” Nucl. Sci. Eng, 123, 421 (1996).
  • S. Koshizuka, H. Ikeda, and Y. Oka, “Numerical Analysis of Fragmentation Mechanisms in Vapor Explosions,” Nucl. Eng. Des, 189, 423 (1999).
  • H. Ikeda et al., “Numerical Analysis of Jet Injection Behavior for Fuel-Coolant Interaction Using Particle Method,” J. Nucl. Sci. Technol., 38, 3, 174 (2001).
  • S. Park and G. Jeun, “Coupling of Rigid Body Dynamics and Moving Particle Semi-Implicit Method for Simulating Isothermal Multi-Phase Fluid Interactions,” Comput. Methods Appl. Mech. Eng, 200, 130 (2011).
  • D. Baraff, “Curved Surfaces and Coherence for NonPenetrating Rigid Body Simulation,” Computer Graphics, 24, 4, 19 (1990).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.