REFERENCES
- R. K. Sinha and A. Kakodkar, “The Road Map for a Future Indian Nuclear Energy System,” Proc. Int. Conf. Innovative Technologies for Nuclear Fuel Cycles and Nuclear Power, Vienna, Austria, June 23–26, 2003, International Atomic Energy Agency (2003).
- H. S. Kamath, K. Anantharaman, and D. S. C. Purushotham, “MOX Fuel for Indian Power Programme,” Proc. MOX Fuel Cycle Technologies for Medium and Long Term Deployment, Vienna, Austria, May 17–21, 1999, International Atomic Energy Agency (1999).
- K. G. Watkins, C. Curran, and J. M. Lee, “Two New Mechanisms for Laser Cleaning Using Nd-YAG Sources,” J. Cult. Hert., 4, 59S (2003).
- Y. F. Lu et al., “Wavelength Effects in the Laser Cleaning Process,” Jpn. J. Appl. Phys., 37, 840 (1998).
- D. Kim et al., “Experimental and Theoretical Analysis of the Laser Shock Cleaning Process for Nanoscale Particle Removal,” Appl. Surf. Sci., 253, 8322 (2007).
- D. A. Wesner et al., “Cleaning of Copper Traces on Circuit Boards with Excimer Laser Radiation,” Appl. Surf. Sci., 96-98, 479 (1996).
- W. Zapka, W. Ziemlich, and A. C. Tam, “Efficient Pulsed Laser Removal of 0.2 mm Sized Particles from a Solid Surface,” Appl. Phys. Lett., 58, 20, 2217 (1991).
- D. Grojo et al., “Influence of Laser Pulse Shape on Dry Laser Cleaning,” Appl. Surf. Sci., 252, 4786 (2006).
- J. B. Heroux et al., “CO2 Laser Assisted Removal of Sub-Micron Particles from Solid Surface,” J. Appl. Phys., 79, 6, 2857 (1996).
- S. J. Lee, K. Imen, and S. D. Allen, “CO2 Laser Assisted Particle Removal Threshold Measurement,” Appl. Phys. Lett., 61, 79, 2314 (1992).
- PH. Delaporte et al., “Radioactive Oxide Removal by XeCl Laser,” Appl. Surf. Sci., 197-198, 826 (2002).
- PH. Delaporte et al., “Dry Excimer Laser Cleaning Applied to Nuclear Decontamination,” Appl. Surf. Sci., 208-209, 298 (2003).
- V. P. Veiko et al., “Laser Decontamination of Metallic Surface,” J. Opt. Tech., 74, 8, 536 (2007).
- D. E. Roberts and T. S. Modise, “Laser Removal of Loose Uranium Compound Contamination from Metal Surface,” Appl. Surf. Sci., 253, 5258 (2007).
- “Safety of Uranium and Plutonium Mixed Oxide Fuel Fabrication Facilities,” Specific Safety Guide No. SSG-7, p. 42, International Atomic Energy Agency (2010).
- A. C. Tam et al., “Laser Cleaning Techniques for Removal of Surface Particulates,” J. Appl. Phys., 71, 7, 3515 (1992).
- Kumar et al., “CO2 Laser Assisted Removal of UO2 and ThO2 Particles from Metal Surface,” Appl. Surf. Sci., 257, 76, 7263 (2011).
- D. Samantaray et al., “A Thermo-Viscoplastic Constitutive Model to Predict Elevated-Temperature Flow Behaviour in a Titanium-Modified Austenitic Stainless Steel,” Mater. Sci. Eng. A, 526, 1 (2009).