REFERENCES
- D. T. Ingersoll, “Deliberately Small Reactors and the Second Nuclear Era,” Prog. Nucl. Energy, 51, 589 (2009); http://dx.doi.Org/10.1016/j.pnucene.2009.01.003.
- “Innovative Small and Medium Sized Reactor: Design Features, Safety Approaches and R&D Trends,” IAEA-TECDOC-1451, International Atomic Energy Agency (2005).
- “Status of Innovative Small and Medium Sized Reactor Designs 2005,” IAEA-TECDOC-1485, International Atomic Energy Agency (2006).
- “Status of Small Reactor Designs Without On-Site Refueling,” IAEA-TECDOC-1536, International Atomic Energy Agency (2007).
- P. Lorenzini, “Presentation to U.S. Nuclear Regulatory Commission, Resulting Conclusions,” EPRI RP-1585, Electric Power Research Institute (2008).
- J. A. Halfinger and M. D. Haggerty, “The B&W mPower™ Scalable, Practical Nuclear Reactor Design,” Nucl. Technol., 178, 2, 164 (2012); http://dx.doi.org/10.13182/NT11-65.
- M. D. Carelli et al., “The Design and Safety Features of the IRIS Reactor,” Nucl. Eng. Des., 230, 151 (2004); http://dx.doi.org/10.1016/j.nucengdes.2003.11.022.
- M. Ishii et al., “Scientific Design of Purdue University Novel Modular Reactor (NMR-50),” PU/NE-12-27, Purdue University (June 2013).
- “Simplified Boiling Water Reactor Standard Safety Analysis Report (SSAR),” 25A5113, Rev. A, General Electric (Aug. 1992).
- D. R. Tinkler and T. J. Downar, “The Neutronics Design and Analysis of a 200-MW(electric) Simplified Boiling Water Reactor Core,” Nucl. Technol., 142, 3, 230 (2003); http://dx.doi.org/10.13182/NT02-47.
- “CASMO-4: A Fuel Assembly Burnup Program—User’s Manual,” SSP-09/443-U Rev 0, Studsvik Scandpower Inc. (2009).
- T. Downar, Y. Xu, and V. Seker, “PARCS v3.0 — U.S. Nrc Core Neutronics Simulator User Manual,” University of Michigan, Department of Nuclear Engineering and Radiological Sciences (2009).
- “RELAP5/MOD3.3 Code Manual,” Information Systems Laboratory, Nuclear Safety Analysis Division (2002).
- “Fuel Review, Design Data,” Nuclear Engineering International (Sep. 2012).
- M. J. Driscoll, T. J. Downar, and E. E. Pilat, The Linear Reactivity Model for Nuclear Fuel Management, American Nuclear Society, La Grange Park, Illinois (1990).
- A. Geist et al., “PVM3 User’s Guide and Reference Manual,” ORNL/TM-12187, Oak Ridge National Laboratory (1994).
- M. Ishii et al., “Novel Modular Natural Circulation BWR Design and Safety Evaluation,” Ann. Nucl. Energy, 85, 220 (2015); http://dx.doi.org/10.1016/j.anucene.2015.05.009.
- J. E. Hench and J. C. Gillis, “Correlation of Critical Heat Flux Data for Application to Boiling Water Reactor Conditions,” EPRI-NP-1898 RP1751-1, Electric Power Research Institute (June 1981).