22
Views
5
CrossRef citations to date
0
Altmetric
Technical Paper

Leaching of 137Cs, 134Cs, and 129I from Irradiated UO2 Fuel

, , &
Pages 470-475 | Published online: 13 May 2017

References

  • Y. B. KATAYAMA, “Leaching of Irradiated LWR Fuel Pellets in Deionized and Typical Ground Water,” BNWL-2057, Battelle-Pacific Northwest Laboratories (1976).
  • T. T. VANDERGRAAF, “Leaching of Irradiated UO2 Fuel,” TR-100, Unrestricted, unpublished report, available from Scientific Documents Distribution Office, Atomic Energy of Canada Limited Research Company, Chalk River, Ontario (1980).
  • B. W. GOODWIN, R. J. LEMIRE, and L. H. JOHNSON, “A Stochastic Model for the Dissolution of Irradiated UO2 Fuel,” Proc. Int. Conf. Radioactive Waste Management, Winnipeg, September 13–15, 1982, p. 298, Canadian Nuclear Society (1982).
  • Workshop on Iodine Releases in Reactor Accidents, NSAC-14, Nuclear Safety Analysis Center/Electric Power Research Institute (1980).
  • Proc. Int. IAEA Specialists’ Mtg. Fuel Rod Chemistry, IWGFPT/3, International Atomic Energy Agency, Vienna (1979).
  • “Method for Calculating the Fractional Release of Volatile Fission Products from Oxide Fuel,” ANSI/ANS 5.4, American National Standards Institute (1982).
  • M. J. F. NOTLEY, “ELESIM: A Computer Code for Predicting the Performance of Nuclear Fuel Elements,” Nucl. Technol., 44, 445 (1979).
  • L. J. MATTILA and R. T. SAIRANEN, “An Evaluation of Gas Release Modelling Approaches as to Their Applicability in Fuel Behavior Models,” Proc. IAEA Specialists’ Mtg. Water Reactor Fuel Element Performance Modelling, Blackpool, United Kingdom, March 17–21, 1980, International Atomic Energy Agency (1980).
  • M. J. F. NOTLEY and I. J. HASTINGS, “A Microstructure-Dependent Model for Fission Product Gas Release and Swelling in UO2 Fuel,” Nucl. Eng. Des., 56, 163 (1980); see also AECL-5838, Atomic Energy of Canada Limited (1979).
  • J. A. TURNBULL, C. A. FRISKNEY, J. R. FINDLAY, F. A. JOHNSON, and A. J. WALTER, “The Diffusion Coefficients of Gaseous and Volatile Species During the Irradiation of Uranium Dioxide,” RD/B/N492, Central Electricity Generating Board (1980).
  • I. J. HASTINGS, C. E. L. HUNT, J. J. LIPSETT, and R. D. McDONALD, “Behavior of Short-Lived Fission Products Within Operating UO2 Fuel Elements,” Proc. IAEA Specialists’ Mtg. Water Reactor Fuel Element Performance Computer Modelling, Preston, United Kingdom, March 14–19, 1982, International Atomic Energy Agency (1982).
  • T. M. BESMANN and T. B. LINDEMER, “Chemical Thermodynamics of the System Cs-U-Zr-H-I-0 in the Light Water Reactor Fuel-Cladding Gap,” Nucl. Technol., 40, 297 (1978).
  • D. CUBICCIOTTI and J. E. SANECKI, “Characterization of Deposits on Inside Surfaces of LWR Cladding,” J. Nucl. Mater., 78, 96 (1978).
  • P. E. POTTER, “Phase Equilibria and the Understanding of the Behavior of Nuclear Fuel in Water Reactors,” Proc. IAEA Specialists’ Mtg. Internal Fuel Rod Chemistry, IWGFPT/3, International Atomic Energy Agency (1979).
  • L. H. JOHNSON, D. W. SHOESMITH, G. E. LUNAN-SKY, M. G. BAILEY, and P. R. TREMAINE, “Mechanisms of Leaching and Dissolution of UO2 Fuel,” Nucl. Technol., 56, 238 (1982).
  • U-B. EKLUND and R. FORSYTH, “Leaching of Irradiated UO2 Fuel,” KBS Technical Report No. 70, Kärn-Bränsle-Säkerhet (1978) (in Swedish).
  • L. J. CLEGG and J. R. COADY, “Radioactive Decay Properties of CANDU Fuel Vol. 1: The Natural Uranium Fuel Cycle,” AECL-4436/1, Atomic Energy of Canada Limited (1977).
  • K. I. BURNS, C. J. MOORE, and D. G. BOASE, “Release of 134Cs, 137Cs and 129I from the Fuel/Sheath Gap of CANDU Irradiated Fuel,” presented at the Canadian Nuclear Society International Conference on Radioactive Waste Management, Winnipeg, September 13–15, 1982.
  • K. I. BURNS, C. J. MOORE, and E. M. ASHBOURNE, “The Determination of Iodine-129 in Fuel Leaching Solutions by Neutron Activation Analysis,” Proc. Int. Conf. Radioactive Waste Management, Winnipeg, September 13–15, 1982, p. 394, Canadian Nuclear Society (1982).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.