References
- R. FRÖHLICH, F. HELM, G. KEßLER and E. KIEFHABER, “Safety Related Physics in the DEBENE FBR Project-Present Status, Need and Perspectives,” KfK-3082, Kernforschungszentrum Karlsruhe (1980).
- J. D. GABOR, E. S. SOWA, L. BAKER, Jr. and J. C. CASSULO, “Studies and Experiments on Heat Removal from Debris in Sodium,” Proc. ANS Mtg. Fast Reactor Safety, Beverly Hills, California, April 2–4, 1974, Pt. 2, p. 823, available from the National Technical Information Service (1974).
- V. K. DHIR and I. CATTON, “Dryout of Heat Generating Particulate Beds in Sodium,” Trans. Am. Nucl. Soc., 22, 445 (1975).
- L. BAKER, Jr., D. R. PEDERSEN, J. D. GABOR, S. W. JONES and J. D. BINGLE, “Correlations of Particulate Debris Bed Coolability Data,” Proc. 5th Post Accident Heat Removal Information Exchange Mtg., Karlsruhe, FRG, July 28–30, 1982, p. 66 (1982).
- G. F. STEVENS and R. TRENBERTH, “Experimental Studies of Boiling Heat Transfer and Dryout in Heat Generating Particulate Beds in Water at 1 Bar,” Proc. 5th Post Accident Heat Removal Information Exchange Mtg., Karlsruhe, FRG, July 28–30, 1982, p. 108 (1982).
- D. SQUARER, L. E. HOCHREITER and A. T. PIECZYNSKI, “Some Aspects of Decay Heat Removal from a Debris Bed and Its Implication to Degraded Core Coolability,” Proc. 5th Post Accident Heat Removal Information Exchange Mtg., Karlsruhe, FRG, July 28–30, 1982, p. 159 (1982).
- I. CATTON, V. K. DHIR and C. W. SOMERTON, “An Experimental Study of Debris Bed Coolability Under Pool Boiling Conditions,” EPRI NP-3094, Electric Power Research Institute (May 1983).
- R. J. LIPINSKI, “A Model for Boiling and Dryout in Particle Beds,” NUREG/CR-2646, U.S. Nuclear Regulatory Commission (1982).
- E. SCHMIDT, Ed., Properties of Water and Steam in Si-Units, Springer-Verlag Berlin (1969).
- N. B. VARGAFTIK, Tables on the Thermophysical Properties of Liquids and Gases, 2nd ed., Hemisphere Publishing Corp., Washington (1975).
- R. N. LYON et al., Liquid-Metals Handbook, Navexos P-733 (Rev.) (1952).
- A. PEE, “Stoffdaten von Natrium,” KfK-924, Kernforschungszentrum Karlsruhe (1969).
- L. LEIBOWITZ, Ed., “Properties for LMFBR Safety Analysis,” ANL-CEN-RSD-76-1, Argonne National Laboratory (1976).
- Deutsches Kupfer Institut, Ed., Legierungen des Kupfers mit Zinn, Blei und anderen (1965).
- B. SCHULZ, “Thermal Conductivity of Porous and Highly Porous Materials,” High Temp.-High Pressures, 13, 649 (1981).
- L. BARLEON and H. WERLE, “Debris Bed Investigations with Adiabatic and Cooled Bottom,” Ninth Mtg. Liquid Metal Boiling Working Group (LMBWG), Rome, 1980.
- R. J. LIPINSKI, “A Particle-Bed Dryout Model with Upward and Downward Boiling,” Trans. Am. Nucl. Soc., 35, 358 (1980).
- J. B. RIVARD, “Postaccident Heat Removal: Debris-Bed Experiments D-2 and D-3,” NUREG/CR-0421, U.S. Nuclear Regulatory Commission (1978).
- G. W. MITCHELL, R. J. LIPINSKI and M. L. SCHWARZ, “Heat Removal from a Stratified UO2-Sodium Particle Bed,” NUREG/CR-2412, U.S. Nuclear Regulatory Commission (1982).
- L. BARLEON and H. WERLE, “Dependence of Dryout Heat Flux on Particle Diameter for Volume- and Bottom-Heated Debris Beds,” KfK-3138, Kernforschungszentrum Karlsruhe (1981).