References
- Proc. Conf. Alloy 800, Petten, The Netherlands, March 14–16, 1978, W. BETTERIDGE et al., Eds., North-Holland Publishing Company, Amsterdam (1978).
- L. D. BLACKBURN, “Isochronous Stress-Strain Curves for Austenitic Stainless Steels,” The Generation of Isochronous Stress-Strain Curves, American Society of Mechanical Engineers, New York (1972).
- E. METCALFE, B. NATH and L. F. GALBRAITH, CERL Laboratory Report No. RD/L/R 1988.
- W. HARTNAGEL, K. SCHNEIDER and H. JESSEN, “Werkstoffgesetze fur Inelastische Analyse am THTRWerkstoff Incoloy 800,” Jahrestagung Kerntechnik 82, p. 551, Bonn (1982).
- B. REPPICH, P. SCHEPP and G. WEHNER, “Some New Aspects Concerning Particle Hardening Mechanisms in y’-Precipitating Nickel-Base Alloys-II. Experiments,” Acta Metall., 30, 95 (1982).
- H. E. EVANS and G. KNOWLES, “Threshold Stress for Creep in Dispersion-Strengthened Alloys,” Met. Sci. J., 14, 262 (1980).
- W. J. EVANS and G. F. HARRISON, “The Development of a Universal Equation for Secondary Creep Rates in Pure Metals and Engineering Alloys,” Met. Sci. J., 10, 307 (1976).
- D. McLEAN, “Resistance to Hot Deformation,” Trans. AIME, 242, 1193 (1968).
- R. LAGNEBORG and B. BERGMANN, “The Stress/Creep Rate Behavior of Precipitation-Hardened Alloys,” Met. Sci. J., 10, 20 (1976).
- S. KIHARA, J. B. NEWKIRK, A. OHTOMO and Y. SAIGA, “Morphological Changes of Carbides During Creep and Their Effects on the Creep Properties of Inconel 617 at 1000°C,” Met. Trans. A, 11A, 1019 (1980).
- W. D. NIX and B. ILSCHNER, “Mechanisms Controlling Creep of Single Phase Metals and Alloys,” Proc. ICSMA 5, Aachen, 1979, p. 1503.
- C. G. SCHMIDT and A. K. MILLER, “The Effect of Solutes on the Strength and Strain Hardening Behavior of Alloys,” Acta Metall., 30, 615 (1982).
- A. S. ARGON and S. TAKEUCHI, “Internal Stresses in Power-Law Creep,” Acta Metall., 29, 1877 (1980).
- P. SCHEPP, B. ILSCHNER, W. HARTNAGEL and K. SCHNEIDER, “Kriechverhalten von Inconel 617 in Luft und HTR-Atmospharen,” Jahrestagung Kerntechnik 82, p. 547, Bonn (1982).