13
Views
0
CrossRef citations to date
0
Altmetric
D.Gas/Metal Reaction

Evaporation Behavior of Hastelloy-X Alloys in Simulated Very High Temperature Reactor Environments

&
Pages 429-438 | Published online: 13 May 2017

References

  • H. NICKEL, P. J. ENNIS, F. SCHUBERT and H. SCHUSTER, “Qualification of Metallic Materials for Application in Advanced High-Temperature Gas-Cooled Reactors,” Nucl. Technol., 58, 90 (1982).
  • T. KONDO, “On the Development of Heat Resisting Alloys for Application to a Very High Temperature Helium-Cooled Reactor (VHTR),” Proc. Conf. Gas Cooled Reactors Today, Bristol, England, September 20–24, 1982, No. 95, British Nuclear Energy Society (1983).
  • R. A. U. HUDDLE, “Metals and Alloys for Very High Temperature Reactors,” Proc. Conf. High Temperature Reactor and Process Applications, London, November 26–28, 1974, Session VI, British Nuclear Energy Society (1974).
  • W. R. JOHNSON and G. Y. LAI, “Interaction of Metals with Primary Coolant Impurities of Steam-Cycle 438 and Advanced HTGRs,” Proc. IAEA Specialists’Mtg. High Temperature Metallic Materials for Application in Gas-Cooled Reactors, Vienna, May 4–6, 1981, p. J1, International Atomic Energy Agency (1981).
  • L. W. GRAHAM, K. G. E. BRENNER and K. KROMPHOLZ, “The Behavior of High Temperature Alloys During Exposure in Impure Helium,” Proc. IAEA Specialists’ Mtg. High Temperature Metallic Materials for Application in Gas-Cooled Reactors, Vienna, May 4–6, 1981, p. Kl, International Atomic Energy Agency (1981).
  • M. SHINDO and T. KONDO, “Corrosion of Nickel-Base Heat Resistant Alloys in Simulated VHTR Coolant Helium at Very High Temperature,” Tetsu to Hagane, 62, 1540 (1976) (in Japanese).
  • M. SHINDO and T. KONDO, “Studies on Improving Compatibility of Nickel-Base Alloys with High Temperature Helium-Cooled Reactor (VHTR) Environment,” Proc. Conf. Gas-Cooled Reactors Today, Bristol, England, September 20–24, 1982, No. 97, British Nuclear Energy Society (1983).
  • T. KONDO, “Environmental Effects on the Performance of Superalloys in Advanced High Temperature Nuclear Reactors,” Bull. Jpn. Inst. Met., 13, 93 (1974) (in Japanese).
  • R. TANAKA and T. KONDO, “R&D on Heat-Resistant Alloys for Nuclear Process Heating in Japan,” Nucl. Technol., 66, 75 (1984).
  • M. SHINDO, T. SUZUKI and T. KONDO, “Oxidation Kinetics and Spallation of Oxide Film of the Structural Metal in HTR Helium Under Thermal Cycles,” JAERI-M 8210, Japan Atomic Energy Research Institute (1979).
  • M. SHINDO and T. KONDO, “Effect of Mn on Oxidation Resistance of Hastelloy X in Simulated VHTR Helium Environment,” JAERI-M 8770, Japan Atomic Energy Research Institute (1980) (in Japanese).
  • D. T. BOURGETTE, “Evaporation of Iron-, Nickeland Cobalt-Base Alloys at 760 to 980°C in High Vacuums,” ORNL-3677, Oak Ridge National Laboratory (1964).
  • M. SHINDO and T. KONDO, “Influence of Manganese and Silicon on High Temperature Oxidation of Nickel-Base Heat Resistant Alloys in Simulated VHTR Helium Environment,” Tetsu to Hagane, 68, 1628 (1982) (in Japanese).
  • C. S. GIGGINS and F. S. PETTIT, “The Oxidation of TDNiC (Ni-20 Cr-2 vol% ThOz) Between 900°C and 1200°C,” Met. Trans., 2, 1071 (1971).
  • D. Caplan and M. Cohen, “The Volatilization of Chromium Oxide,” J. Electrochem. Soc., 108, 438 (1961).
  • D. L. DOUGLASS and J. S. ARMIGO, “The Effect of Silicon and Manganese on the Oxidation Mechanism of Ni-20 Cr,” Oxid. Metals, 2, 207 (1970).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.