References
- S. B. WATSON and R. H. RAINEY, “Modifications on the SEPHIS Computer Code for Calculating the Purex Solvent Extraction System,” ORNL-TN-5123, Oak Ridge National Laboratory (1975).
- K. GONDA, K. OKA, and S. FUKUDA, “Calculation Code Revised MIXSET for Purex Process,” PNCT841-79-26, Power Reactor and Nuclear Fuel Development Corporation (1979) (in Japanese).
- J. O. HINZE, “Fundamentals of the Hydrodynamic Mechanism of Splitting in Dispersion Processes,” AIChE J., 1, 3, 289 (1955).
- M. H. I. BAIRD and S. J. LANE, “Drop Size and Holdup in a Reciprocating Plate Extraction Column,” Chem. Eng. Sci., 28, 947 (1973).
- M. M. HAFEZ, N. NEMECEK, and J. PROCHAZKA, “Hold-Up and Flooding in Reciprocating-Plate Extractors,” Proc. ISEC, 74, 2, 1671 (1974).
- L. BOYADZHIEV and M. SPASOV, “On the Size of Drops in Pulsed and Vibrating Plate Extraction Columns,” Chem. Eng. Sci., 37, 2, 337 (1980).
- A. MERSMANN, “Zum Flutpunkt in Flussig/flussiggegenstrom-kolonnen,” Chem. Ing. Tech., 52, 12, 933 (1980).
- D. NIEBUHR, “Fluid Dynamics in Pulsed Sieve-Plate Extraction Column,” Proc. 2nd World Congress of Chemical Engineering, Montreal, Canada, October 4–9, 1981, Vol. 4, p. 422 (1981).
- S. Z. KAGEN, M. E. AEROV, V. LONIK, and T. S. VOLKOVA, “Some Hydrodynamic and Mass-Transfer Problems in Pulsed-Plate Extractors,” Int. Chem. Eng., 5, 4 (1965).
- H. SCHMIDT and H. MILLER, “Betriebsbereich, Hold-up, Tropfengrosse und axial Vermischung gepulster Bodenkolonnen bei hohen dispersen und geringen kontinuierlichen Volumenstromen,” KfK-Nachr. Jahrg. 143/82, p. 154, Kernforschungszentrum Karlsruhe (1982).
- I. H. IKEDA and A. SUZUKI, “Droplet Diameter in Pulsed Perforated-Plate Column of Pulser Feeder Type,” J. At. Energy Soc. Jpn., 31, 2, 296 (1989) (in Japanese).
- T. MIYAUCHI and H. OYA, “Longitudinal Dispersion in Pulsed Plate Columns,” AIChE J., 11, 3, 395 (1965).
- W. BATEY, S. J. LONIE, P. J. THOMPSON, and J. D. THORNTON, “The Dynamics of Pulsed Plate Extraction Columns Part 3: Droplet Size Studies in the Absence of Mass Transfer,” ND-R-1062(D), United Kingdom Atomic Energy Authority (1986).
- G. VASSALLO, “The Hydrodynamic Behavior of a Pulsed Column,” EUR-8597 EN, Commission of the European Communities (1983).
- M. NABESHIMA, M. KITAHARA, C. TANAKA, and M. SHUTO, “Dynamic Simulation Code ‘DYNAC’ for the Purex Extraction Cycle Composed of Pulse Columns,” Proc. Mtg. Solvent Extraction Techniques, Dounreay, Scotland, June 22–25, 1987, Institution of Chemical Engineers (1987).
- M. NABESHIMA and C. TANAKA, “Estimation of Transient Performance of a Purex Solvent Extraction Cycle by Process Simulation Code DYNAC,” Proc. Joint Int. Waste Management Conf., Kyoto, Japan, October 22–28, 1989, Vol. 2, p. 217 (1989).
- T. MIYAUCHI and T. VERMEULEN, “Diffusion and Back-Flow Models for Two-Phase Axial Dispersion,” I&EC Fundamentals, 2, 4, 304 (1963).
- R. BRITSCH, “Backmixing Studies in a Pulsed Extraction Column Using Radioactive Tracer Techniques—I. Aqueous Phase Investigations,” Int. J. Appl. Radiat. Isot., 34, 9, 1400 (1983).
- J. H. KIM, “Axial Dispersion in a Pulsed Perforated Plate Column,” KAERI/RR-271/80, Korean Atomic Energy Research Institute (1980).
- R. GAYLOR, N. W. ROBERTS, and H. R. C. PRATT, “Liquid-Liquid Extraction: Part IV. A Further Study of Hold-Up in Packed Columns,” Trans. Inst. Chem. Eng., 31, 57 (1953).
- A. KUMAR and S. HARTLAND, “Correlations for Dispersed Phase Sieve-Plate Liquid-Liquid Extraction Columns,” Chem. Eng. Res. Des., 61, 4, 248 (1983).
- H. SCHMIDT, E. EGGERT, and E. M. LESSLE, “Die Wirkung von Koaleszenz und Benetzung auf das Betriebsverhalten gepulster Bodenkolonnen,” KfK-3634, Kernforschungszentrum Karlsruhe (1983).
- G. I. TAYLOR, “The Viscosity of a Fluid Containing Small Drops of Another Fluid,” Proc. R. Soc. London, Ser. A, 108, 41 (1932).
- V. KHEMANGKORN, G. MURATET, and H. ANGELINO, “Study of Dispersion in a Pulsed Perforated-Plate Column,” Proc. ISEC 77, 1, 429 (1977).
- K. GONDA and T. MATSUDA, “Calculation Code PULCO for Purex Process in Pulsed Column,” PNCT-841-82-19, Power Reactor and Nuclear Fuel Development Corporation (1982) (in Japanese).
- K. H. REISSINGER and R. MARR, “Beitrag zur Auslegung pulsierter Siebboden-Extractoren (PSE),” Chem. Ing. Tech., 56, 558 (1984).
- H. SOVOVA and J. PROCHAZKA, “Evaluation of Drop Size and Hold-Up in Axially Agitated Plate Columns,” Proc. ISEC 86, 3, 231 (1986).
- J. SCHÖN, H. J. BLEYL, G. HÖFFLE, E. HAMBURGER, M. KLUTH, H. SCHMIEDER, A. STOLLENWERK, H. WILDE, and D. ERTEL, “Experimente zur Pu-Akkumulation in Extraction und Spaltproduktwäsche,” KfK-4476, Kernforschungszentrum Karlsruhe GmbH (1988).