6
Views
1
CrossRef citations to date
0
Altmetric
Technical Paper

A Model for Container Performance in an Unsaturated Repository

Pages 29-45 | Published online: 13 May 2017

References

  • NUCLEAR WASTE TECHNICAL REVIEW BOARD, “Fifth Report to the U.S. Congress and the U.S. Secretary of Energy,” Executive Summary, U.S. Government Printing Office, Washington, D.C. (June 1992).
  • R. K. MCGUIRE et al., “Demonstration of a Risk-Based Approach to High-Level Waste Repository Evaluation: Phase 2,” NP-100384, Electric Power Research Institute (May 1992).
  • F. W. SCHWARTZ et al., “Demonstration of a Decision Analysis Methodology for Assessing the Performance of the Yucca Mountain Site in Southern Nevada,” Waste Manage., 11, 287 (1991).
  • R. K. MCGUIRE et al., “Demonstration of a Risk-Based Approach to High-Level Waste Repository Evaluation,” NP-7057, Electric Power Research Institute (Oct. 1990).
  • D. B. BULLEN, “Containment Barrier System Performance Assessment Modeling,” Proc. 4th Int. High Level Radioactive Waste Management Conf., Las Vegas, Nevada, April 26-30, 1993, Vol. 1, p. 470, American Nuclear Society (1993).
  • D. B. BULLEN, “Engineered Barrier System Failure Modeling: A Statistical Approach,” Proc. 3rd Annual Int. High Level Radioactive Waste Management Conf., Las Vegas, Nevada, April 12-16, 1992, Vol. 1, p. 401, American Nuclear Society (1992).
  • D. B. BULLEN, “Performance Assessment Modeling of a Multi-Purpose Container,” Scientific Basis for Nuclear Waste Management XVII, Mater. Res. Soc. Symp. Proc., 333, 869 (1994).
  • R. W. ANDREWS, T. F. DALE, and J. A. MCNEISH, “Total System Performance Assessment—1993: An Evaluation of the Potential Yucca Mountain Repository,” B00000000-01717-2200-00099-Rev. 01, INTERA, Inc. (Mar. 1994).
  • M. L. WILLSON et al., “Total-System Performance Assessment for Yucca Mountain-SNL Second Iteration (TSPA—1993),” SAND93-2675, Vols. 1 and 2, Sandia National Laboratories (Apr. 1994).
  • J. C. FARMER et al., “Survey of Degradation Modes of Candidate Materials for High-Level Radioactive Waste Disposal Containers,” UCID-21362, Vols. 1-8, Lawrence Livermore National Laboratory (June 1988).
  • G. E. GDOWSKI, “Survey of Degradation Modes of Four Nickel Chromium Molybdenum Alloys,” UCRL-ID-108330, Lawrence Livermore National Laboratory (Mar. 1991).
  • J. C. FARMER, G. E. GDOWSKI, R. D. MCCRIGHT, and H. S. AHLUWALIA, “Corrosion Models for Performance Assessment of High-Level Radioactive Waste Containers,” UCRL-JC-103517, Lawrence Livermore National Laboratory (May 1990).
  • R. E. THOMAS, “A Feasibility Study Using Hypothesis Testing to Demonstrate Containment of Radionuclides Within Waste Packages,” BMI/ONWI-599, Battelle Memorial Institute (Apr. 1986).
  • R. A. SHAW and R. K. MCGUIRE, “Demonstration of a Risk-Based Approach to High-Level Repository Evaluation Phase II,” Proc. 4th Annual Int. High Level Radioactive Waste Management Conf., Las Vegas, Nevada, April 26-30, 1993, Vol. 1, p. 1, American Nuclear Society (1993).
  • T. A. BUSCHECK, J. J. NITAO, and S. F. SATERLIE, “Evaluation of the Thermo-Hydrological Performance in Support of the Thermal Loading Systems Study,” Proc. 5th Int. High Level Radioactive Waste Management Conf., Las Vegas, Nevada, May 23-27, 1994, Vol. 2, p. 592, American Nuclear Society (1994).
  • T. A. BUSCHECK and J. J. NITAO, “The Analysis of Repository Heat-Driven Hydrothermal Flow at Yucca Mountain,” Proc. 4th Annual Int. High Level Radioactive Waste Management Conf., Las Vegas, Nevada, April 26-30, 1993, Vol. 1, p. 847, American Nuclear Society (1993).
  • T. A. BUSCHECK and J. J. NITAO, “The Impact of Thermal Loading on Repository Performance at Yucca Mountain,” Proc. 3rd Annual Int. High Level Radioactive Waste Management Conf., Las Vegas, Nevada, April 12-16, 1992, Vol. 1, p. 1003, American Nuclear Society (1992).
  • J. J. NITAO, “Numerical Modeling of the Thermal and Hydrological Environment Around a Nuclear Waste Package Using the Equivalent Continuum Approximation: Horizontal Emplacement,” UCID-21444, Lawrence Livermore National Laboratory (May 1988).
  • T. M. SULLIVAN and C. J. SUEN, “Low-Level Waste Shallow Land Disposal Source Term Model: Data Input Guides,” NUREG/CR-5387, U.S. Nuclear Regulatory Commission (July 1989).
  • M. ROMANOFF, “Underground Corrosion,” Circular 579, National Bureau of Standards (1957).
  • S. F. MUGHABGHAB and T. M. SULLIVAN, “Evaluation of the Pitting Corrosion of Carbon Steels and Other Ferrous Metals in Soil Systems,” Waste Manage., 9, 239 (1989).
  • W. F. GERHOLD, E. ESCALANTE, and B. T. SANDERSON, “The Corrosion Behavior of Selected Stainless Steels in Soil Environments,” NBSIR 81-2228, National Bureau of Standards (Feb. 1981).
  • K. H. LOGAN, “Engineering Significance of National Bureau of Standards Soil-Corrosion Data,” J. Res. Natl. Bur. Stand., 22, 109 (1939).
  • K. H. LOGAN, “Underground Corrosion,” Circular 450, National Bureau of Standards (1945).
  • G. N. SCOTT, “Adjustment of Soil-Corrosion Pit Depth Measurements for Size of Sample,” Proc. American Petroleum Institute, 14, 204 (1934).
  • “Site Characterization Plan, Yucca Mountain Site,” DOE/RW-0199, U.S. Department of Energy (1988).
  • A. D. BRASUNAS, J. T. GOW, and O. E. HARDER, “Resistance of Iron-Nickel-Chromium Alloys to Corrosion in Air at 1600 to 2200°F,” ASTMBull., 46, 870 (1946).
  • J. W. BRAITHWAITE and M. A. MOLECKE, “Nuclear Waste Canister Corrosion Studies Pertinent to Geologic Isolation,” Nucl. Chem. Waste Manage., 1, 37 (1980).
  • R. B. NIEDERBERGER, R. J. FERRA, and F. A. PLUMMER, “Corrosion of Nickel Alloys in Quiet and Low-Velocity Sea Water,” Mater. Prot. Perform., 9, 8, 18 (1970).
  • H. H. UHLIG, Corrosion Handbook, p. 645, John Wiley & Sons, Inc., New York (1948).
  • C. C. HU, “Failure Rate Evaluation of Multi-Purpose Unit (MPU) Containers in Various Thermal Environments with a Revised Containment Barrier System (CBS) Model,” MS Thesis, Iowa State University (Nov. 1993).
  • A. J. HALLINAN, JR., “A Review of the Weibull Distribution,” J. Quality Technol., 25, 2, 85 (Apr. 1993).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.