160
Views
22
CrossRef citations to date
0
Altmetric
Review

Controlled release systems for insulin delivery

Pages 1147-1155 | Published online: 02 Dec 2005

Bibliography

  • CHOI S, KIM SW: Controlled release of insulin from injectable biodegradable triblock copolymer depot in ZDF rats. Pharm. Res. (2003) 20(12):2008–2010.
  • TRAITEL T, COHEN Y, KOST J: Characterization of glucose-sensitive insulin release systems in simulated in vivo conditions. Biomaterials (2000) 21(10:1679–1687.
  • PEPPAS NA: Is there a future in glucose-sensitive, responsive insulin delivery systems? J. Drug Del. Sci. Tech. (2004) 14(4):247–256.
  • KIM YJ, CHOI S, KOH JJ et aL: Controlled release of insulin from injectable biodegradable triblock copolymer. Pharm. Res. (2001) 18(4):548–550.
  • TAKENAGA M, YAMAGUCHI Y, KITAGAWA A et al.: A novel sustained-release formulation of insulin with dramatic reduction in initial rapid release. J. Control. Release (2002) 79(1-3):81–91.
  • TAKENAGA M, YAMAGUCHI Y, KITAGAWA A et aL: Optimum formulation for sustained-release insulin. Int. j Pharm. (2004) 271(1-2):85–94.
  • KAWAMORI R: Practical concept for insulin therapy. Intern. Med. (1994) 73:236–243.
  • MARSCHUTZ MK, CALICETI P, BERNKOP-SCHNURCH A: Design and in vivo evaluation of an oral delivery system for insulin. Pharm. Res. (2000) 17(12):1468–1474.
  • SURENDRAKUMAR K, MARTYN GP,HODGERS ECM et al.: Sustained release of insulin from sodium hyaluronate based dry powder formulations after pulmonary delivery to beagle dogs. J. Control. Release (2003) 91(3):385–394.
  • CALICETI P, VERONESE FM, LORA S: Polyphosphazene microspheres for insulin delivery: Int. J. Pharm. (2000) 211(1-2):57–65.
  • YE Q, ASHERMAN J, STEVENSON M22. et al.: DepoFoami'm technology: a vehicle for controlled delivery of protein and peptide drugs. J. Control. Release (2000) 64(1-3):155–166.
  • REITHMEIER H, HERRMANN J,23. GOPFERICH A: Lipid microparticles as a parenteral controlled release device for peptides. J. Control. Release (2001) 73(2–3):339–350.24.
  • ZENTNER GM, RATHI R, SHIH C et al.: Biodegradable block copolymers for delivery of proteins and water-insoluble drugs. J. Control. Release (2001) 72(1-3):203–215.
  • SLAGER J, DOMB AJ: Stereocomplexesbased on poly(lactic acid) and insulin: formulation and release studies. Biomateriab (2002) 23(22):4389–4396.
  • YAMAGUCHI Y, TAKENAGA M, KITAGAWA A et al.: Insulin-loaded26. biodegradable PLGA microcapsules: initial burst release controlled by hydrophilic additives. J. Control. Release (2002) 81(3):235–249.
  • SHENOY DB, D'SOUZA RJ, TIWARI SB et al.: Potential applications of polymeric27.microsphere suspension as subcutaneous depot for insulin. Drug Develop. Ind. Pharm. (2003) 29(5):555–563.
  • JIANG G, QIU W, DELUCA PP: Preparation and in vitro/ in vivo evaluation28.of insulin-loaded poly(acryloyl-hydroxyethyl starch)-PLGA composite microspheres. Pharm. Res. (2003) 20(3):452–459.
  • KIM YJ, KIM SW: Controlled drug29. delivery from injectable biodegradable triblock copolymer. Polymer Gels Fund. And Acs Symp. Series (2003) 833:300–311.
  • KWON YM, KIM SW: Biodegradable triblock copolymer microspheres based on thermosensitive sol-gel transition. Pharm. Res. (2004) 21(2):339–343.
  • HARI PR, CHANDY T, SHARMA CP: Chitosan/calcium-alginate beads for oral delivery of insulin. J. Appl. Polym. Sci. (1996) 59 (11): 1795–1801.
  • AGARWAL V, REDDY IK, KHAN Mk Polymethyacrylate based microparticulates of insulin for oral delivery: preparation and in vitro dissolution stability in the presence of enzyme inhibitors. Int. J. Pharm. (2001) 225(1–2):31-39. VICTOR SP, SHARMA CP: Stimuli sensitive polymethacrylic acid microparticles (PMAA) - oral insulin delivery. J. Biomater. And (2002) 17(2):125–134. SARIRI R, GHANNADZADEH A: The use of polyglycol succinates for the microencapsulation of insulin. Iran. Polym. J. (2002) 11(1):47–55. WANG K, HE ZM: Alginate-konjac glucomannan-chitosan beads as controlled release matrix. Int. J. Pharm. (2002) 244(1–2):117-126. DORKOOSH FA, VERHOEF JC, AMBAGTS MHC et al.: Peroral delivery systems based on superporous hydrogel polymers: release characteristics for the peptide drugs buserelin, octreotide and insulin. Europ. j Pharm. Sci. (2002) 15(5):433–439. 30.
  • MORISHITA M, LOWMAN AM, TAKAYAMA K et al.: Elucidation of the mechanism of incorporation of insulin in controlled release systems based on complexation polymers. J. Control. Release (2002) 81(1-2):25–32.
  • TORRES D, RODRIGUEZ M, CUNA M: Microencapsulated lipid cores for site-specific delivery of corticosteroid and peptide drugs to the colonic region. STP Pharm. Sci. (2003) 13(1):49–56.
  • KRAULAND AH, GUGGI D, BERNKOP-SCHNURCH A: Oral insulin delivery: the potential of thiolated chitosan-insulin tablets on non-diabetic rats. J. Control. Release (2004) 95(3):547–555.
  • PEPPAS NA: Devices based on intelligent biopolymers for oral protein delivery. Int. J. Pharm. (2004) 277(1-2):11–17.
  • PARK SE, NHO YC, LIM YM et aL: Preparation of pH-sensitive poly(vinyl alcohol-g-methacrylic acid) and poly(vinyl alcohol-g-acrylic acid) hydrogels by y ray irradiation and their insulin release behavior. J. And Polym. Sci. (2004) 91(1):636–643.
  • PARK SE, NHO YC, KIM HI: Preparation of poly(polyethylene glycol methacrylateco-acrylic acid) hydrogels by radiation and their physical properties. Radix-. Phys. Chem. (2004) 69(3):221–227.
  • SKYLER JS, CEFALU WT, KOURIDES IA et al.: Efficacy of inhaled insulin in Type 1 diabetes mellitus: a randomised proof-of-concept study. Lancet (2001) 357:331–335.
  • CEFALU WT, ROSENSTOCK J, BINDRA S: Inhaled insulin: a novel route for insulin delivery. Expert Opin. Investig. Drugs (2002) 11(5):687–691.
  • FU J, FIEGEL J, KRAULAND E et aL: New polymeric carriers for controlled drug delivery following inhalation or injection. Biomateriab (2002) 23(22):4425–4433.
  • DAVIDSON IG, LANGNER EJ, PLOWMAN SV et al.: Release mechanism of insulin encapsulated in trehalose ester derivative microparticles delivered via inhalation. Int. j Pharm. (2003) 254(2):211–222.
  • FIEGEL J, FU J, HANES J: Poly(ether-anhydride) dry powder aerosols for sustained drug delivery in the lungs. J. Control. Release (2004) 96(3):411–423.
  • YEO SH, ZHANG HY: Development of a novel sonophoresis micro-device. Biomed. Microdev. (2003) 5(3):201–206.
  • LANGER R: Drug delivery and targeting. Nature (1998) 392:5–10.
  • GALAEV IY, MATTIASSON B: 'Smart' polymers and what they could do in biotechnology and medicine. Trends BiotechnoL (1999) 17:335–340.
  • BROWNLEE M, CERAMI k A glucose-controlled insulin delivery system: semisynthetic insulin bound to lectin. Science (1979) 206:1190–1191.
  • BROWNLEE M, CERAMI A: Glycosylated insulin complexed to concanavalin A. Biochemical basis for a closed-loop insulin delivery system. Diabetes (1983) 32:499–504.
  • JEONG SY, KIM SW, EENINK MJD et al.: Self-regulating insulin delivery systems. I. Synthesis and characterization of glycosylated insulin. J. Control. Release (1984) 1:57–66.
  • SATO S, JEONG SY, MCREA JC et aL: Self-regulating insulin delivery systems. II. In vitro studies. J. Control. Release (1984) 1:67–77.
  • JEONG SY, KIM SW, HOLEMBERG D et al.: Self-regulating insulin delivery systems. III. In vivo studies. J. Control. Release (1985) 2:143–152.
  • SATO S, JEONG SY, MCREA JC et al.: Glucose stimulated insulin delivery system. Pure And Chem. (1984) 56:1323–1328.
  • KOST J, HORBETT TA, RATNER BD et al.: Glucose sensitive membranes containing glucose oxidase: activity, swelling and permeability studies. J. Biomed. Mater. Res. (1985) 19:1117–1133.
  • ALBIN G, HORBETT TA, RATNER BD: Glucose sensitive membranes for controlled delivery of insulin: insulin transport studies. J. Control. Release (1985) 2:153–164.
  • ALBIN G, HORBETT TA, MILLER NL et al.: Theoretical and experimental studies of glucose sensitive membranes. J. Control. Release (1987) 6:267–291.
  • ITO Y, CASOLARO M, KONO K et al.: An insulin-releasing system that is responsive to glucose. J. Control. Release (1989) 10:195–203.
  • SIEGEL RA, FIRESTONE BA: Mechanochemical approaches to self-regulating insulin pump design. J. Control. Release (1989) 11:181–192.
  • MAKINO M, MACK EJ, OKANO T et al.: A microcapsule self-regulating delivery system for insulin. J. Control. Release (1990) 12:235–239.
  • MAKINO K, MACK EJ, OKANO T et ell.: Self-regulated delivery of insulin from microcapsules. Biomater. Arufic. Cells Immobihz. Biotechnol. (1991) 19(1):219–228.
  • KITANO S, KOYAMA Y, KATAOKA K et al.: A novel drug delivery system utilizing a glucose responsive polymer complex between poly(vinyl alcohol) and poly(N-vinyl-2-pyrrolidone) with a phenylboronic acid moiety. J. Control. Release (1992) 19(1-3):162–170.
  • CHUNG DJ, ITO Y, IMANISHI Y: Sythesis of glucose-sensitive insulin-releasing protein devices. Bull. Chem. Soc. Jpn. (1994) 67(5):1468–1471.
  • CARTIER S, HORBETT TA, RATNER BD: Glucose-sensitive membrane coated porous filters for control of hydraulic permeability and insulin delivery from a pressurized reservoir. J. Membrane Sci. (1995) 106(1-2):17–24.
  • IMANISHI Y, ITO Y: Glucose-sensitive insulin-releasing molecular systems. Pure Appl. Chem. (1995) 67(12):2015–2021.
  • GRONING R, WALZ C: Development of experimental insulin pumps with glucose-controlled release. Int. j Pharm. (1995) 119(2):127–131.
  • SHIINO D, MURATA Y, KUBO A et ell.: Amine containing phenylboronic acid gel for glucose-responsive insulin release under physiological pH. J. Control. Release (1995) 37(3):269–276.
  • OBAIDAT AA, PARK K: Characterization of glucose dependent gel-sol phase transition of the polymeric glucose-concanavalin A hydrogel system. Pharma. Res. (1996) 13(7):989–995.
  • BROWN LR, EDELMAN ER, FISCHELGHODSIAN F et al.: Characterization of glucose-mediated insulin release from implantable polymers. Pharm. Sci. (1996) 85(12):1341–1345.
  • GRONING R: Computer-controlled drug release from small-sized dosage forms. J. Control. Release (1997) 48(2-3):185–193.
  • LIU F, SONG SC, MIX D et al.: Glucose-induced release of glycosylpoly(ethylene glycol) insulin bound to a soluble conjugate of concanavalin A. Bioconjug-. Chem. (1997) 8(5):664–672.
  • YUK SH, BAE YH: Phase-transition polymers for drug delivery. Crit. Rev. Ther. Drug Car. Sys. (1999) 16(0385–423.
  • PODUAL K, DOYLE FJ, PEPPAS NA: Preparation and dynamic response of cationic copolymer hydrogels containing glucose oxidase. Polymer (2000) 41(11):3975–3983.
  • PODUAL K, DOYLE FJ, PEPPAS NA: Glucose-sensitivity of glucose oxidase-containing cationic copolymer hydrogels having poly(ethylene glycol) grafts. J. Control. Release (2000) 67(1):9–17.
  • PODUAL K, DOYLE FJ, PEPPAS NA: Dynamic behavior of glucose oxidase-containing microparticles of poly(ethylene glycol) -grafted cationic hydrogels in an environment of changing pH. Biomaterieds (2000) 21(14):1439–1450.
  • DE WOLF FA, BRETT GM: Ligand-binding proteins: their potential for application in systems for controlled delivery and uptake of ligands. Pharm. Rev. (2000) 52(2):207–236.
  • QIU Y, PARK K: Environment-sensitive hydrogels for drug delivery. Adv. Drug Deliver. Rev. (2001) 53(3):321–339.
  • KOST J, LANGER R: Responsive polymeric delivery systems. Adv. Drug Deliver. Rev. (2001) 46(1-3):125–148.
  • ZHANG K, WU XY: Modulated insulin permeation across a glucose-sensitive polymeric composite membrane. J. Control. Release (2002) 80:169–178.
  • BRAHIM S, NARINESINGH D, GUISEPPI-ELIE A: Bio-smart hydrogels: co-joined molecular recognition and signal transduction in biosensor fabrication and drug delivery. Biosens. Bioelectron. (2002) 17(11-12):973–981.
  • SOPPIMATH KS, AMINABHAVI TM, DAVE AM et al.: Stimulus-responsive 'smart' hydrogels as novel drug delivery systems. Drug Develop. Ind. Pharm. (2002) 28(8):957–974.
  • KANG SI, BAE YH: A sulfonamide based glucose-responsive hydrogel with covalently immobilized glucose oxidase and catalase. J. Control. Release (2003) 86(1):115–121.
  • PODUAL K, DOYLE F, PEPPAS NA: Modeling of water transport in and release from glucose-sensitive swelling-controlled release systems based on poly(diethylaminoethyl methacrylate-g-ethylene glycol). Ind. Eng. Chem. Res. (2004) 43(23):7500–7512.
  • MATSUMOTO k KURATA T, SHIINO D et al.: Swelling and shrinking kinetics of totally synthetic, glucose-responsive polymer gel bearing phenylborate derivative as a glucose-sensing moiety. Macromolecules (2004) 37(4):1502–1510.
  • CHU LY, LIANG YJ, CHEN WM et al.: Preparation of glucose-sensitive microcapsules with a porous membrane and functional gates. Colloid. Surf B Biointerf (2004) 37(1-2):9–14.
  • CHU LY, LI Y, ZHU JH et aL: Control of pore size and permeability of a glucose-responsive gating membrane for insulin delivery. J. Control Release (2004) 97:43–53.
  • STEIL GM, PANTELEON AE, REBRIN K: Closed-loop insulin delivery - the path to physiological glucose control. Adv. Drug Deliver. Rev. (2004) 56:125–144.
  • KIM YH, BAE YH, KIM SW: pH/temperature-sensitive polymers for macromolecular drug loading and release. J. Control. Release (1994) 28:143–152.
  • YU H, GRAINGER DW: Modified release of hydrophilic, hydrophobic and peptide agents from ionized amphiphilic gel networks. J. Control Release (1995) 34(2):117–127. 1154Expert Opin. Ther Patents (2005) 15(9)
  • HARIHARAN D, PEPPAS NA: Characterization, dynamic swelling behaviour and solute transport in cationic networks with applications to the development of swelling-controlled release systems. Polymer (1996) 37(1):149–161.
  • KAGATANI S, SHINODA T, KONNO Y et al.: Electroresponsive pulsatile depot delivery of insulin from poly(dimethylaminopropylacrylamide) gel in rats. J. Pharm. Sci. (1997) 86(10:1273–1277.
  • GOLDBART R, KOST J: Calcium responsive bioerodible drug delivery system. Pharm. Res. (1999) 16(9):1483–1486.
  • PARK TG: Temperature modulated protein release from pH/temperature-sensitive hydrogels. Biomateriais (1999) 20(6):517–521.
  • RAMKISSOON-GANORKAR C, LIU F, BAUDYS M et al.: Modulating insulin-release profile from pH thermosensitive polymeric beads through polymer molecular weight. J. Control Release (1999) 59(3):287–298.
  • KWOK CS, MOURAD PD, CRUM LA et al.: Self-assembled molecular structures as ultrasonically-responsive barrier membranes for pulsatile drug delivery. J. Biomed. Mater. Res. (2001) 57(2):151–164.
  • TRAITEL T, KOST J, LAPIDOT SA: Modeling ionic hydrogels swelling: Characterization of the non-steady state. Biotechnol Bioeng. (2003) 84(1):20–28.
  • ZHANG K, WU XY: Temperature and pH-responsive polymeric composite membranes for controlled delivery of proteins and peptides. Biomaterials (2004) 25(22):5281–5291.
  • NHO YC, LIM YM, LEE YM: Preparation, properties and biological application of pH-sensitive poly(ethylene oxide) (PEO) hydrogels grafted with acrylic acid(AAc) using gamma-ray irradiation. Radiat. Phys. Chem. (2004) 71(1-2):239–242.
  • PANAYIOTOU M, FREITAG R: Synthesis and characterisation of stimuli-responsive poly(N,N-diethylacrylamide) hydrogels. Polymer (2005) 46(3):615–621.
  • GOLOMB G, SHAKED I, HOFFMAN A: Intrauterine administration of peptide drugs for systemic effect. Adv. Drug Deliver. Rev. (1995) 17(2):179–190.
  • EDELMAN ER, BROWN L, LANGER R: Quantification of insulin release from implantable polymer-based delivery systems and augmentation of therapeutic effect with simultaneous release of somatostatin. Pharm. Sci. (1996) 85(12):1271–1275.
  • BARICHELLO JM, MORISHITA M, TAKAYAMA K et al.: Absorption of insulin from Pluronic F-127 gels following subcutaneous administration in rats. Int. J. Pharm. (1999) 184(2):189–198.
  • CARENZA M, CALICETI P, VERONESE FM et al.: Poly(acryloyl-L-proline methyl ester) hydrogels obtained by radiation polymerization for the controlled release of drugs. Radiat. Phys. Chem. (2000) 57(3-0:471–475.
  • CALICETI P, SALMASO S, LANTE A et al.: Controlled release of biomolecules from temperature-sensitive hydrogels prepared by radiation polymerization. J. Control. Release (2001) 75(1-2):173–181.
  • SERSHEN S, WEST J: Implantable, polymeric systems for modulated drug delivery. Adv. Drug Deliver. Rev. (2002) 54(9):1225–1235.
  • SURINI S, AKIYAMA H, MORISHITA M et al.: Polyion complex of chitosan and sodium hyaluronate as an implant device for insulin delivery. STP Pharm. Sci. (2003) 13(4):265–268.
  • SURINI S, AKIYAMA H, MORISHITA M et al.: Release phenomena of insulin from an implantable device composed of a polyion complex of chitosan and sodium hyaluronate. J. Control. Release (2003) 90(3):291–301.
  • BAJPAI AK, BHANU S: In vitro release dynamics of insulin from a loaded hydrophilic polymeric network. J. Mater. Sci. Mater. Med. (2004) 15(1):43–54.
  • SONI V SINGH R, SRINIVASAN R et al.: Pulsatile insulin delivery through the ocular route. Drug Deliv. (1998) 5(1):47–51.
  • BARICHELLO JM, MORISHITA M, TAKAYAMA K et al: Enhanced rectal absorption of insulin-loaded Pluronic (R) F-127 gels containing unsaturated fatty acids. Int. J. Pharm. (1999) 183(2):125–132. Patents

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.