Printing technologies in fabrication of drug delivery systems

Bibliography

• Hamburg MA, Collins FS. The path to personalized medicine. N England J Med 2010;363(4):301-4
   PubMed Web of Science ®Google Scholar
• Jones D. Steps on the road to personalized medicine. Nat Rev Drug Discov 2007;6(10):770-1
   Web of Science ®Google Scholar
• Buanz AB, Saunders MH, Basit AW, Gaisford S. Preparation of personalized-dose salbutamol sulphate oral films with thermal ink-jet printing. Pharm Res 2011;28(10):2386-92
   PubMed Web of Science ®Google Scholar
• Genina N, Fors D, Palo M, et al. Behavior of printable formulations of loperamide and caffeine on different substrates—effect of print density in inkjet printing. Int J Pharm 2013;453(2):488-97
   PubMed Web of Science ®Google Scholar
• Janssen EM, Schliephacke R, Breitenbach A, Breitkreutz J. Drug-printing by flexographic printing technology–a new manufacturing process for orodispersible films. Int J Pharm 2013;441(1-2):818-25
   PubMed Web of Science ®Google Scholar
• Raijada D, Genina N, Fors D, et al. A step toward development of printable dosage forms for poorly soluble drugs. J Pharm Sci 2013;102(10):3694-704
   PubMed Web of Science ®Google Scholar
• Genina N, Fors D, Vakili H, et al. Tailoring controlled-release oral dosage forms by combining inkjet and flexographic printing techniques. Eur J Pharm Sci 2012;47(3):615-23
   PubMed Web of Science ®Google Scholar
• Calvert P. Inkjet printing for materials and devices. Chem Mater 2001;13(10):3299-305
   Web of Science ®Google Scholar
• de Gans BJ, Duineveld PC, Schubert US. Inkjet printing of polymers: state of the art and future developments. Adv Mater 2004;16(3):203-13
   Web of Science ®Google Scholar
• Forrest SR. The path to ubiquitous and low-cost organic electronic appliances on plastic. Nature 2004;428(6986):911-18
   PubMed Web of Science ®Google Scholar
• Xu T, Rohozinski J, Zhao W, et al. Inkjet-mediated gene transfection into living cells combined with targeted delivery. Tissue Eng Part A 2009;15(1):95-101
   PubMed Web of Science ®Google Scholar
• Abukawa H, Papadaki M, Abulikemu M, et al. The engineering of craniofacial tissues in the laboratory: a review of biomaterials for scaffolds and implant coatings. Dent Clin North Am 2006;50(2):205-16
   PubMedGoogle Scholar
• Campbell GP, Weiss EL. Tissue engineering with the aid of inkjet printers. Expert Opin Biol Ther 2007;7(8):1123-7
   PubMed Web of Science ®Google Scholar
• Mironov V, Kasyanov V, Drake C, Markwald RR. Organ printing: promises and challenges. Regen Med 2008;3(1):93-103
   PubMed Web of Science ®Google Scholar
• Lin S, Chao PY, Chien YW, et al. In vitro and in vivo evaluations of biodegradable implants for hormone replacement therapy: effect of system design and PK-PD relationship. AAPS PharmSciTech 2001;2(3):E16
   PubMedGoogle Scholar
• Marks PC, Aron M, Lipson H. 3D printing: second industrial revolution is under way (special report). News Sci 2011;2823(211):20
   Google Scholar
• Geissler M, Xia Y. Patterning: principles and some new developments. Adv Mater 2004;16(15):1249-69
   Web of Science ®Google Scholar
• Symes DM, Kitson JP, Yan J, et al. Integrated 3D-printed reactionware for chemical synthesis and analysis. Nat Chem 2012;4(5):349-54
   PubMed Web of Science ®Google Scholar
• Cooley P, Wallace D, Antohe B. Applicatons of ink-jet printing technology to BioMEMS and microfluidic systems. J Assoc Lab Autom 2002;7(5):33-9
   Google Scholar
• Le PH. Progress and trends in ink-jet printing technology. J Imaging Sci Techn 1998;42(1):13
   Google Scholar
• Melendez PA, Kane KM, Ashvar CS, et al. Thermal inkjet application in the preparation of oral dosage forms: dispensing of prednisolone solutions and polymorphic characterization by solid-state spectroscopic techniques. J Pharm Sci 2008;97(7):2619-36
   PubMed Web of Science ®Google Scholar
• Adams JM, Faux DD, Rieber JJ. Printing technology. 4th edition. Delmar Publisher; Albany: Ny: 1996
   Google Scholar
• Kipphan H. Handbook of print media. Springer Verlag - Berlin, Heidelberg; New York: 2001
   Google Scholar
• Hambsch M, Reuter K, Stanel M, et al. Uniformity of fully gravure printed organic field-effect transistors. Mater Sci Eng: B 2010;170(1–3):93-8
   Web of Science ®Google Scholar
• Kattumenu R, Rebros M, Joyce M, et al. Effect of substrate properties on conductive traces printed with silver-based flexographic ink. Nord Pulp Pap Res J 2009;24(1):4
   Google Scholar
• Jo J, Yu J-S, Lee T-M, et al. Fabrication of organic thin-film transistors with roll-printed electrodes using patterned polymer stamp. Mol Cryst Liq Cryst 2009;514(1):81/[411]-91/[21]
   Web of Science ®Google Scholar
• Reuter K, Kempa H, Deshmukh KD, et al. Full-swing organic inverters using a charged perfluorinated electret fabricated by means of mass-printing technologies. Org Electron 2010;11(1):95-9
   Web of Science ®Google Scholar
• Yan H, Chen Z, Zheng Y, et al. A high-mobility electron-transporting polymer for printed transistors. Nature 2009;457(7230):679-86
   PubMed Web of Science ®Google Scholar
• Deganello D, Cherry JA, Gethin DT, Claypole TC. Patterning of micro-scale conductive networks using reel-to-reel flexographic printing. Thin Solid Films 2010;518(21):6113-16
   Web of Science ®Google Scholar
• Huebler AC, Doetz F, Kempa H, et al. Ring oscillator fabricated completely by means of mass-printing technologies. Org Electron 2007;8(5):480-6
   Web of Science ®Google Scholar
• Ihalainen P, Määttänen A, Mattinen U, et al. Electrodeposition of PEDOT-Cl film on a fully printed Ag/polyaniline electrode. Thin Solid Films 2011;519(7):2172-5
   Web of Science ®Google Scholar
• Saarinen JJ, Ihalainen P, Määttänen A, et al. Printed sensor and electric field assisted wetting on a natural fibre based substrate. Nord Pulp Pap Res J 2011;26(1):8
   Google Scholar
• Kattumenu R, Rebros M, Joyce M, et al. Evaluation of flexographically printed conductive traces on paper substrates for RFID applications. TAGA Annual Technical Conference; Pittsburgh, PA: 2011
   Google Scholar
• Määttänen A, Fors D, Wang S, et al. Paper-based planar reaction arrays for printed diagnostics. Sensor Actuat B: Chem 2011;160(1):1404-12
   Web of Science ®Google Scholar
• Juvonen H, Maattanen A, Lauren P, et al. Biocompatibility of printed paper-based arrays for 2-D cell cultures. Acta Biomater 2013;9(5):6704-10
   PubMed Web of Science ®Google Scholar
• Pudas M, Halonen N, Granat P, Vähäkangas J. Gravure printing of conductive particulate polymer inks on flexible substrates. Prog Org Coat 2005;54(4):310-16
   Web of Science ®Google Scholar
• Harting M, Zhang J, Gamota DR, Britton DT. Fully printed silicon field effect transistors. Appl Phys Lett 2009;94(19):193509-09-3
   Web of Science ®Google Scholar
• Verilhac J-M, Benwadih M, Seiler A-L, et al. Step toward robust and reliable amorphous polymer field-effect transistors and logic functions made by the use of roll to roll compatible printing processes. Org Electron 2010;11(3):456-62
   Web of Science ®Google Scholar
• Shaheen ES, Radspinner R, Peyghambarian N, Jabbour EG. Fabrication of bulk heterojunction plastic solar cells by screen printing. Appl Phys Lett 2001;79(18):3
   Web of Science ®Google Scholar
• Krebs FC, Jørgensen M, Norrman K, et al. A complete process for production of flexible large area polymer solar cells entirely using screen printing—First public demonstration. Sol Energ Mat Sol C 2009;93(4):422-41
   Web of Science ®Google Scholar
• Albareda-Sirvent M, Merkoçi A, Alegret S. Configurations used in the design of screen-printed enzymatic biosensors. A review. Sensor Actuat B: Chem 2000;69(1–2):153-63
   Web of Science ®Google Scholar
• Tarcha PJ, Verlee D, Hui HW, et al. The application of ink-jet technology for the coating and loading of drug-eluting stents. Ann Biomed Eng 2007;35(10):1791-9
   PubMed Web of Science ®Google Scholar
• Sandler N, Maattanen A, Ihalainen P, et al. Inkjet printing of drug substances and use of porous substrates-towards individualized dosing. J Pharm Sci 2011;100(8):3386-95
   PubMed Web of Science ®Google Scholar
• Scoutaris N, Alexander MR, Gellert PR, Roberts CJ. Inkjet printing as a novel medicine formulation technique. J Control Release 2011;156(2):179-85
   PubMed Web of Science ®Google Scholar
• Pardeike J, Strohmeier DM, Schrodl N, et al. Nanosuspensions as advanced printing ink for accurate dosing of poorly soluble drugs in personalized medicines. Int J Pharm 2011;420(1):93-100
   PubMed Web of Science ®Google Scholar
• Genina N, Janßen EM, Breitenbach A, et al. Evaluation of different substrates for inkjet printing of rasagiline mesylate. Eur J Pharm Biopharm 2013; doi: 10.1016/j.ejpb.2013.03.017
   PubMed Web of Science ®Google Scholar
• Yeo Y, Basaran OA, Park K. A new process for making reservoir-type microcapsules using ink-jet technology and interfacial phase separation. J Controll Release 2003;93(2):161-73
   PubMed Web of Science ®Google Scholar
• Goodall S, Chew N, Chan K, et al. Aerosolization of protein solutions using thermal inkjet technology. J Aerosol Med 2002;15(3):351-7
   PubMedGoogle Scholar
• Mueannoom W, Srisongphan A, Taylor KM, et al. Thermal ink-jet spray freeze-drying for preparation of excipient-free salbutamol sulphate for inhalation. Eur J Pharm Biopharm 2012;80(1):149-55
   PubMed Web of Science ®Google Scholar
• Sharma G, Mueannoom W, Buanz AB, et al. In vitro characterisation of terbutaline sulphate particles prepared by thermal ink-jet spray freeze drying. Int J Pharm 2013;447(1-2):165-70
   PubMed Web of Science ®Google Scholar
• Lee BK, Yun YH, Choi JS, et al. Fabrication of drug-loaded polymer microparticles with arbitrary geometries using a piezoelectric inkjet printing system. Int J Pharm 2012;427(2):305-10
   PubMed Web of Science ®Google Scholar
• Huang Q, Shen W, Song W. Synthesis of colourless silver precursor ink for printing conductive patterns on silicon nitride substrates. Appl Surf Sci 2012;258(19):7384-8
   Web of Science ®Google Scholar
• Jang D, Kim D, Moon J. Influence of fluid physical properties on ink-jet printability. Langmuir 2009;25(5):2629-35
   PubMed Web of Science ®Google Scholar
• Sun JM, Wei X, Huang BQ. Influence of the viscosity of edible ink to piezoelectric ink-jet printing drop state. Appl Mech Mater 2012;200:15
   Google Scholar
• Diao Y, Myerson AS, Hatton TA, Trout BL. Surface design for controlled crystallization: the role of surface chemistry and nanoscale pores in heterogeneous nucleation. Langmuir 2011;27(9):5324-34
   PubMed Web of Science ®Google Scholar
• Di Profio G, Fontananova E, Curcio E, Drioli E. From tailored supports to controlled nucleation: exploring material chemistry, surface nanostructure, and wetting regime effects in heterogeneous nucleation of organic molecules. Cryst Growth Des 2012;12(7):3749-57
   Web of Science ®Google Scholar
• Hsu HY, Toth SJ, Simpson GJ, et al. Effect of substrates on naproxen-polyvinylpyrrolidone solid dispersions formed via the drop printing technique. J Pharm Sci 2013;102(2):638-48
   PubMed Web of Science ®Google Scholar
• Hoffmann EM, Breitenbach A, Breitkreutz J. Advances in orodispersible films for drug delivery. Expert Opin Drug Deliv 2011;8(3):299-316
   PubMed Web of Science ®Google Scholar
• Preis M, Woertz C, Kleinebudde P, Breitkreutz J. Oromucosal film preparations: classification and characterization methods. Expert Opin Drug Deliv 2013;10(9):1303-17
   PubMed Web of Science ®Google Scholar