1,815
Views
162
CrossRef citations to date
0
Altmetric
Reviews

Analysis of initial burst in PLGA microparticles

, PhD
Pages 615-628 | Published online: 05 Jun 2008

Bibliography

  • Mason N, Thies C, Cicero TJ. In vitro and in vivo evaluation of a microencapsulated narcotic antagonist. J Pharm Sci 1976;65:847-50
  • Yolles S. Long-acting delivery systems for narcotic antagonists.2. Release rates of naltrexone from PLA composites. J Pharm Sci 1975;64:348
  • Huang X, Brazel CS. On the importance and mechanisms of burst release in matrix-controlled drug delivery systems. J Control Release 2001;73:121-36
  • Yeo Y, Park K. Control of encapsulation efficiency and initial burst in polymeric microparticle systems. Arch Pharm Res 2004;27:1-12
  • Narasimhan B, Langer R. Zero-order release of micro- and macromolecules from polymeric devices: the role of the burst effect. J Control Release 1997;47:13-20
  • Faisant N, Siepmann J, Benoit JP. PLGA-based microparticles: elucidation of mechanisms and a new, simple mathematical model quantifying drug release. Eur J Pharm Sci 2002;15:355-66
  • Berkland C, Kim K, Pack DW. PLG microsphere size controls drug release rate through several competing factors. Pharm Res 2003;20:1055-62
  • Berkland C, King M, Cox A, et al. Precise control of PLG microsphere size provides enhanced control of drug release rate. J Control Release 2002;82:137-47
  • Klose D, Siepmann F, Elkharraz K, et al. How porosity and size affect the drug release mechanisms from PLGA-based microparticles. Int J Pharm 2006;314:198-206
  • Arifin DY, Lee LY, Wang CH. Mathematical modeling and simulation of drug release from microspheres: Implications to drug delivery systems. Adv Drug Del Rev 2006;58:1274-325
  • Halley BA, Jacob TA, Lu AYH. The environmental impact of the use of ivermectin: environmental effects and fate. Chemosphere 1989;18:1543-63
  • Clark SL, Crowley AJ, Schmidt PG, et al. Long-term delivery of ivermectin by use of poly(D,L-lactic-co-glycolic)acid microparticles in dogs. Am J Vet Res 2004;65:752-7
  • Batycky RP, Hanes J, Langer R, Edwards DA. A theoretical model of erosion and macromolecular drug release from biodegrading microspheres. J Pharm Sci 1997;86:1464-77
  • Rosilio V, Benoit JP, Deyme M, et al. A physicochemical study of the morphology of progesterone-loaded microspheres fabricated from poly(D,L-lactide-co-glycolide). J Biomed Mater Res 1991;25:6667-82
  • Zhao A, Rogers VGJ. Using TEM to couple transient protein distribution and release for PLGA microparticles for potential use as vaccine delivery vehicles. J Control Release 2006;113:15-22
  • Langer R, Folkman J. Polymers for the sustained release of proteins and other macromolecules. Nature 1976;263:797-800
  • Fredenberg S, Reslow M, Axelsson A. Measurement of protein diffusion through poly(D,L-lactide-co-glycolide). Pharm Dev Technol 2005;10:299-307
  • Budd PM, McKeown NB, Fritsch D. Free volume and intrinsic microporosity in polymers. J Mater Chem 2005;15:1977-86
  • McNaught AD, Wilkinson A, editors. Compendium of chemical terminology. 2nd edition. Boston: Blackwell Science Ltd; 1997
  • Saowanee J, Sompol P, Bodmeier R. Effect of poly(lactide-co-glycolide) molecular weight on the release of dexamethasone sodium phosphate from microparticles. J Microencap 2007;24:117-28
  • Siepmann J, Faisant N, Akiki J, et al. Effect of the size of biodegradable microparticles on drug release: experiment and theory. J Control Release 2004;96:123-34
  • Rosca ID, Watari F, Uo M. Microparticle formation and its mechanism in single and double emulsion solvent evaporation. J Control Release 2004;99:271-80
  • Yang YY, Chia HH, Chung T-S. Effect of preparation temperature on the characteristics and release profiles of PLGA microspheres containing protein fabricated by double-emulsion solvent extraction/evaporation method. J Control Release 2000;69:81-96
  • Li W-I, Anderson KW, De Luca PP. Kinetic and thermodynamic modeling of the formation of polymeric microspheres using solvent extraction/evaporation method. J Control Release 1995;37:187-98
  • Yang YY, Chung TS, Bai XL, Chan WK. Effect of preparation conditions on morphology and release profiles of biodegradable polymeric microspheres containing protein fabricated by double-emulsion method. Chem Eng Sci 2000;55:2223-36
  • Yushu H, Venkatraman S. The effect of process variables on the morphology and release characteristics of protein-loaded PLGA particles. J Appl Polym Sci 2006;101:3053-61
  • Jeyanthi R, Thanoo BC, Metha RC, DeLuca PP. Effect of solvent removal technique on the matrix characteristics of polylactide/glycolide microspheres for peptide delivery. J Control Release 1996;38:235-44
  • Luan X, Skupin M, Siepmann J, Bodmeier R. Key parameters affecting the initial release (burst) and encapsulation efficiency of peptide-containing poly(lactide-co-glycolide) microparticles. Int J Pharm 2006;324:168-75
  • Li C, Zhang X, Cao Z. Triangular and fibonacci number patterns driven by stress on core/shell microstructures. Science 2005;309:909-11
  • Mohamed F, van der Walle CF. Engineering biodegradable polyester particles with specific drug targeting and release properties. J Pharm Sci 2008;97:71-87
  • Jiang G, Thanoo BC, DeLuca PP. Effect of osmotic pressure in the solvent extraction phase on BSA release profile from PLGA microspheres. Pharm Dev Technol 2002;7:391-9
  • Han M-J. Biodegradable membranes for the controlled release of progesterone. 1. Characterization of membrane morphologies coagulated from PLGA/progesterone/DMF solutions. J Appl Polym Sci 2000;75:60-67
  • Ehtezazi T, Washington C. Controlled release of macromolecules from PLA microspheres: using porous structure topology. J Control Release 2000;68:361-72
  • Petrov O, Furo I, Schuleit M, et al. Pore size distributions of biodegradable polymer microparticles in aqueous environments measured by NMR cryoporometry. Int J Pharm 2006;309:157-62
  • Sant S, Thommes M, Hildgen P. Microporous structure and drug release kinetics of polymeric nanoparticles. Langmuir 2008;24:280-7
  • Sant S, Nadeau V, Hildgen P. Effect of porosity on the release kinetics of propafenone-loaded PEG-g-PLA nanoparticles. J Control Release 2005;107:203-14
  • Kwon MJ, Bae JH, Kim JJ, et al. Long acting porous microparticle for pulmonary protein delivery. Int J Pharm 2007;333:5-9
  • Messaritaki A, Black SJ, van der Walle CF, Rigby SP. NMR and confocal microscopy studies of the mechanisms of burst drug release from PLGA microspheres. J Control Release 2005;108:271-81
  • Ellis SR, Wright JL. Modeling of aqueous transport in rigid porous matrices near the percolation threshold. Pharm Res 2006;23:2441-53
  • Hastedt JE, Wright JL. Percolative transport and cluster diffusion near and below the percolation threshold of a porous polymeric matrix. Pharm Res 2006;23:2427-40
  • Villalobos R, Ganem A, Cordero S, et al. Effect of the drug–excipient ratio in matrix-type controlled release systems: Computer simulation study. Drug Dev Ind Pharm 2005;31:535-43
  • Casault S, Kenward M, Slater GW. Combinatorial design of passive drug delivery platforms. Int J Pharm 2008;339:91-102
  • Wang J, Wang BM, Schwendeman SP. Characterization of the initial burst release of a model peptide from poly(D,L-lactide-co-glycolide) microspheres. J Control Release 2002;82:289-307
  • Kang J, Schwendeman SP. Determination of diffusion coefficient of a small hydrophobic probe in poly(lactide-co-glycolide) microparticles by laser scanning confocal microscopy. Macromolecules 2003;36:1324-30
  • Zhao ZJ, Wang Q, Zhang L, Liu YC. A different diffusion mechanism for drug molecules in amorphous polymers. J Phys Chem B 2007;111:4411-6
  • Lee PI. Kinetics of drug release from hydrogel matrices. J Contr Rel 1985;2:277-88
  • Blasi P, D'Souza SS, Selmin F, Deluca PP. Plasticizing effect of water on poly(lactide-co-glycolide). J Control Release 2005;108:1-9
  • Passerini N, Craig DQ. An investigation into the effects of residual water on the glass transition temperature of polylactide microspheres using modulated temperature DSC. J Control Release 2001;73:111-5
  • Knovel Critical Tables. 2003 [cited 21 April 2008]. Available from: http://www.knovel.com/knovel2/Toc.jsp?
  • Pai MU. Rao KM. Salt effect on liquid–liquid equilibria in the ethyl acetate–ethanol–water system. J Chem Eng Data 1966;11:353-66
  • Gao P, Ding P, Xu H, et al. In vitro and in vivo characterization of huperzine A loaded microspheres made from end-group uncapped poly(d,l-lactide acid) and poly(d,l-lactide-co-glycolide acid). Chem Pharm Bull 2006;54:89-93
  • Hinds KD, Campbell KM, Holland KM, et al. PEGylated insulin in PLGA microparticles. in vivo and in vitro analysis. J Control Release 2005;104:447-60
  • Mao S, Xu J, Cai C, et al. Effect of WOW process parameters on morphology and burst release of FITC-dextran loaded PLGA microspheres. Int J Pharm 2007;334:137-48
  • Kang J, Schwendeman SP. Pore closing and opening in biodegradable polymers and their effect on the controlled release of proteins. Mol Pharm 2007;4:104-18.
  • Bouissou C, Rouse JJ, Price R, Walle CFVD. The influence of surfactant on PLGA microsphere glass transition and water sorption: remodeling the surface morphology to attenuate the burst release. Pharm Res 2006;23:1295-305
  • Zolnik BS, Leary PE, Burgess DJ. Elevated temperature accelerated release testing of PLGA microspheres. J Control Release 2006;112:293-300
  • Berkland C, Kipper MJ, Narasimhan B, et al. Microsphere size, precipitation kinetics and drug distribution control drug release from biodegradable polyanhydride microspheres. J Control Release 2004;94:129-41
  • Tewes F, Munnier E, Antoon B, et al. Comparative study of doxorubicin-loaded poly(lactide-co-glycolide) nanoparticles prepared by single and double emulsion methods. Eur J Pharm Biopharm 2007;66:488-92
  • Zeng J, Yang L, Liang Q, et al. Influence of the drug compatibility with polymer solution on the release kinetics of electrospun fiber formulation. J Control Release 2005;105:43-51
  • Frank A, Rath SK, Venkatraman SS. Controlled release from bioerodible polymers: effect of drug type and polymer composition. J Control Release 2005;102:333-44
  • Janoria KG, Mitra AK. Effect of lactide/glycolide ratio on the in vitro release of ganciclivir and its lipophilic prodrug (GCV-monobutyrate) from PLGA microspheres. Int J Pharm 2007;338:133-41
  • Giunchedi P, Alpar HO, Conte U. PDLLA microspheres containing steroids: spray drying, o/w and w/o/w emulsifications as preparation methods. J Microencap 1998;15:185-95
  • Ogawa Y, Yamamoto M, Okada H, Yashiki T. A new technique to efficiently entrap leuprolide acetate into microcapsules of polylactic acid or copoly(lactic/glycolic) acid. Chem Pharm Bull 1988;36:1095-103
  • Choi SH, Park TG. G-CSF loaded biodegradable PLGA nanoparticles prepared by a single oil-in-water emulsion method. Int J Pharm 2006;311:223-8
  • Choi SH, Park TG. Hydrophobic ion pair formation between leuprolide and sodium oleate for sustained release from biodegradable polymeric microspheres. Int J Pharm 2002;203:193-202
  • Alcock R, Blair JA, O'Mahoney DJ, et al. Modifying the release of leuprolide from spray dried OED microparticles. J Control Release 2002;82:429-40
  • Fu K, Harrell R, Zinski K, et al. A potential approach for decreasing the burst effect of protein from PLGA microspheres. J Pharm Sci 2003;92:1582-91
  • Yoo HS, Choi HK, Park TG. Protein-fatty acid complex for enhanced loading and stability within biodegradable nanoparticles. J Pharm Sci 2001;90:194-201
  • Duncan G, Jess TJ, Mohamed F, et al. The influence of protein solubilization, conformation, and size on the burst release from poly(lactide-co-glycolide) microspheres. J Control Release 2005;110:34-48
  • Lee ES, Kwon MJ, Lee H, Kim JJ. Stabilization of protein encapsulated in poly(lactide-co-glycolide) microspheres by novel viscous S/W/O/W method. Int J Pharm 2007;331:27-37
  • Yeh MK, Chen JL, Chiang CH, Chang ZY. The preparation of sustained release erythropoietin microparticle. J Microencap 2007;24:82-93
  • Castellanos I, Flores G, Griebenow K. Effect of cyclodextrins on a-chymotrypsin stability and loading in PLGA microspheres upon S/O/W encapsulation. J Pharm Sci 2006;95:849-58
  • Kim JH, Taluja A, Knutson K, Bae YH. Stability of bovine serum albumin complexed with PEG-poly(L-histidine) diblock copolymer in PLGA microspheres. J Control Release 2005;109:86-100
  • Oster CG, Kissel T. Comparative study of DNA encapsulation into PLGA microparticles using modified double emulsion methods and spray drying techniques. J Microencap 2005;22:235-44
  • Gomez dos Santos AL, Bochot A, Doyle A, et al. Sustained release of nanosized complexes of polyethyleneimine and anti-TGF-B2 oligonucleotide improves the outcome of glaucoma surgery. J Contr Rel 2006;112:369-81
  • Kang E, Robinson J, Park K, Cheng JX. Paclitaxel distribution in poly(ethylene glycol)/poly(lactide-co-glycolic acid) blends and its release visualized by coherent anti-Stokes raman scattering microscopy. J Control Release 2007;122:261-8
  • Nishino S, Kishida A, Yoshizawa H. Morphology control of polylactide microspheres enclosing irinotecan hydrochloride with polylactide-based polymer surfactant for reduction of initial burst. Int J Pharm 2007;330:32-6
  • Takeda Chemical Industries. Method of production of sustained-release preparation. US6045830 (2000)
  • Yoo JY, Shin JH, Khang G, et al. Effect of glycolide monomer on release behavior of gentamicin sulfate-loaded PLGA microparticles. J Appl Polym Sci 2007;104:1019-25
  • Luan X, Bodmier R. Modification of the tri-phasic drug release pattern of leuprolide acetate-loaded poly(lactide-co-glycolide) microparticles. Eur J Pharm Biopharm 2006;63:205-14
  • Leo E, Ruozi B, Tosi G, Vandelli MA. PLA-microparticles formulated by means of a thermoreversible gel able to modify protein encapsulation and release without being co-encapsulated. Int J Pharm 2006;323:131-8
  • Wang J, Wang BM, Schwendeman SP. Mechanistic evaluation of the glucose-induced reduction in initial burst release of octreotide acetate from poly(D,L-lactide-co-glycolide) microspheres. Biomaterials 2004;25:1919-27
  • Lee ES, Kwon MJ, Na K, Bae JH. Protein release behavior from porous microparticle with lysozyme/hyaluronate ionic complex. Colloids Surf B Biointerfaces 2007;55:125-30
  • Kim HK, Chung HJ, Park TG. biodegradable polymeric microspheres with “open/closed” pores for sustained release of human growth hormone. J Control Release 2006;112:167-74
  • Nsereko S, Amiji M. Localized delivery of paclitaxel in solid tumors from biodegradable chitin microparticle formulations. Biomaterials 2002;23:2723-31
  • Gopferich A, Alonso MJ, Langer R. Development and characterization of microencapsulated microspheres. Pharm Res 1994;11:1568-74
  • Zweers MLT, Engbers GHM, Grijpma DW, Feijen J. Release of anti-restenosis drugs from poly(ethylene oxide)-poly(DL-lactic-co-glycolic acid) nanoparticles. J Control Release 2006;114:317-24
  • Wang Y, Gao JQ, Chen HL, et al. Pluronic F127 gel effectively controls the burst release of drug from PLGA microspheres. Pharmazie 2006;61:367-8
  • Mandal TK, Bostanian LA, Graves RA, Chapman LR. Poly(d,l-lactide-co-glycolide) encapsulated poly(vinyl alcohol) hydrogel as a drug delivery system. Pharm Res 2002;19:1713-9
  • Zhou S, Deng X, Yuan M, Li X. Investigation on preparation and protein release of biodegradable polymer microspheres as drug delivery system. J Appl Polym Sci 2002;84:778-84
  • Lagarce F, Faisant N, Desfontis JC, et al. Baclofen-loaded microspheres in gel suspensions for intrathecal drug delivery: in vitro and in vivo evaluation. Eur J Pharm Biopharm 2005;61:171-80
  • Jeon O, Kang SW, Lim HW, et al. Long-term and zero-order release of basic fibroblast growth factor from heparin-conjugated poly(L-lactide-co-glycolide) nanospheres and fibrin gel. Biomaterials 2006;27:1598-607
  • DeFail AJ, Chu CR, Izzo N, Marra KG. Controlled release of bioactive TGF-B1 from microspheres embedded within biodegradable hydrogels. Biomaterials 2006;27:1579-85
  • Wang S, Cui W, Bei J. Bulk and surface modifications of polylactide. Anal Bioanal Chem 2005;381:547-56
  • Packheuser CB, Kissel T. On the design of in situ forming biodegradable parenteral depot systems based on insulin loaded dialkylaminoalkyl-amine-poly(vinyl alcohol)-g-poly(lactide-co-glycolide) nanoparticles. J Control Release 2007;123:131-40
  • Lucke A, Kiermaier J, Gopferich A. Peptide acylation by poly (a-hydroxy esters). Pharm Res 2002;19:175-81
  • Murty SB, Na DH, Thanoo BC, DeLuca PP. Impurity formation studies with peptide-loaded polymeric microspheres. Part II. In vitro evaluation. Int J Pharm 2005;297:62-72
  • Rothen-Weinhold A, Oudry N, Schnach-Abdellaoui K, et al. Formation of peptide impurities in polyester matrices during implant manufacturing. Eur J Pharm Biopharm 2000;49:253-7
  • Murty SB, Thanoo BC, Wei Q, DeLuca PP. Impurity formation studies with peptide-loaded polymeric microspheres. Part I. in vivo evaluation. Int J Pharm 2005;297:50-61
  • Mehta RC, Jeyanthi R, Calis S, et al. Biodegradable microspheres as depot system for parenteral delivery of peptide drugs. J Control Release 1994;29:375-84
  • Cui F, Cun D, Tao A, et al. Preparation and characterization of melittin-loaded poly(DL-lactic acid) or poly(DL-lactic-co-glycolic acid) microspheres made by the double emulsion method. J Control Release 2005;107:310-9
  • Zaghloul AA, Mustafa F, Siddiqui A, Khan M. Response surface methodology to obtain B-estradiol biodegradable microspheres for long-term therapy of osteoporosis. Pharm Dev Technol 2006;11:377-87
  • Viswanathan NB, Thomas PA, Pandit JK, et al. Preparation of non-porous microspheres with high entrapment efficiency of proteins by a (water-in-oil)-in-oil emulsion technique. J Control Release 1999;58:9-20
  • Sandor M, Bailey NA, Mathiowitz E. Characterization of polyanhydride microsphere degradation by DSC. Polymer 2002;43:279-88
  • Zhang JX, Chen D, Wang SJ, Zhu KJ. Optimizing double emulsion process to decrease the burst release of protein from biodegradable polymer microspheres. J Microencap 2005;22:413-22
  • Wischke C, Borchert HH. Influence of the primary emulsification procedure on the characteristics of small protein-loaded PLGA microparticles for antigen delivery. J Microencap 2006;23:435-48
  • Costantino HR, Johnson OL, Zale SE. Relationship between encapsulated drug particle size and initial release of recombinant human growth hormone from biodegradable microspheres. J Pharm Sci 2004;93:2624-34
  • Leach WT, Simpson DT, Val TN, et al. Uniform encapsulation of stable protein nanoparticles produced by spray freezing for the reduction of burst release. J Pharm Sci 2005;94:56-69
  • Kim TH, Park TG. Critical effect of freezing/freeze-drying on sustained release of FITC-dextran encapsulated within PLGA microspheres. Int J Pharm 2004;271:207-14
  • Rouse JJ, Mohamed F, Walle CFvd. Physical ageing and thermal analysis of PLGA microspheres encapsulating protein or DNA. Int J Pharm 2007;339:112-20
  • Sasaki T, Yamauchi N, Irie S, Sakurai K. Differential scanning calorimetry study on thermal behaviors of freeze-dried poly(L-lactide) from dilute solutions. J Polym Sci Part B Polym Phys 2005;43:115-24
  • Kamei S, Yamada M, Ogawa Y. inventors; Takeda Chemical Industries, assignee. Method of producing sustained-release microparticles. US 1996
  • Thote AJ, Chappell JT, Gupta RB, Kumar R. Reduction in the initial burst release by surface crosslinking of PLGA microparticles containing hydrophilic or hydrophobic drugs. Drug Dev Ind Pharm 2005;1:43-57
  • Adam G, Gibbs JH. On the temperature dependence of cooperative relaxation properties in glass-forming liquids. J Chem Phys 1965;43:139-46

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.