References
- Euro NCAP, Available from Internet, http://www.euroncap.com/, 2002.
- T Frank and K Gruber, Numerical Simulation of Frontal Impact and Offset Collisions, CRAY Channels, Cray Research Inc., 1992, pp. 2-6.
- Pugsley , A and Macaulay , M A . 1978 . Cars in collision-safe structures . New Scientist , : 596 – 598 .
- M L Sharp, J R Jombock and B S Shabel, `Structural performance of aluminium bumpers', Society of Automotive Engineers, SAE Paper No. 780140, 1978, pp. 569-575.
- S C Tang, `Computer modeling of bumper impact resistance', Society of Automotive Engineers, SAE Paper No. 790991, 1979, pp. 3309-3319.
- Johnson , W and Walton , A C . 1983 . An experimental investigation of the energy dissipation of a number of car bumpers under quasi-static lateral loads . Int J Impact Eng , 1 ( 3 ) : 301 – 308 .
- Hanssen , A G , Auestad , T , Tryland , T and Langseth , M . 2003 . The kicking machine: a device for impact testing of structural components . Int J Crashworthiness , 8 ( 4 ) : 1 – 8 .
- O-G Lademo, T Berstad, M Eriksson, T Tryland, T Furu, O S Hopperstad and M Langseth, `A model for process-based crash simulation', Submitted for journal publication, 2005.
- S L Meyerson, D S Zuby and A K Lund, `Repeatability of frontal offset crash tests', Proceedings of 16th Int Tech Conf Enhanced Safety of Vehicles, Washington, DC, National Highway Traffic Safety Administration, 1998.
- A Reyes, O S Hopperstad, O-G Lademo and M Langseth, `Modeling of textured aluminium alloys used in a bumper system: Material tests and characterization', Computational Mat Sci, 2005, Accepted for publication.
- Ø Jensen, `Behaviour of aluminium extrusions subjected to axial loading', PhD Thesis, Department of Structural Engineering, Norwegian University of Science and Technology, Trondheim, 2005.
- S Kokkula, `Bumper beam-longitudinal system subjected to offset impact loading. An experimental and numerical study', PhD Thesis, Department of Structural Engineering, Norwegian University of Science and Technology, Trondheim, 2005.
- Hanssen , A G , Auestad , T , Langseth , M and Tryland , T . 2005 . Development of a 3-component load cell for structural impact testing . Int J Mech Mater Design , 2 ( 1-2 ) : 15 – 22 .
- Bressan , J D and Williams , J A . 1983 . The use of a shear instability criterion to predict local necking in sheet metal deformation . Int J Mech Sci , 25 ( 3 ) : 155 – 168 .
- Jones , N . 2003 . Several phenomena in structural impact and structural crashworthiness . Eur J Mech A/Solids , 22 : 693 – 707 .