References
- Kobayashi T et al : ‘Nitrogen content and porosity of mild steel weld metal’. J Jpn Weld Soc 1966 35 (3) 237 –245.
- Kobayashi T et al : ‘Nitrogen content and porosity of stainless steel weld metal’. J Jpn Weld Soc 1966 35 (4) 330 –338.
- Kobayashi T et al : ‘Arc atmosphere and nitrogen content of weld metal’. Welding in the World 1967 5 (2) 58 –73.
- Kobayashi T et al : ‘Effects of Ti, Zr and Al in the steel electrode upon the nitrogen content of the weld metal’. J Jpn Weld Soc 1968 37 (2) 171 –180.
- Kobayashi T et al : ‘Nitrogen content and porosity of titanium weld metal’. J Jpn Weld Soc 1969 38 (11) 1249 –1256.
- Kobayashi T et al : ‘The nitrogen contents of Fe–Cr, Fe–Ni and Fe–Cr–Ni weld metals’. Trans. JWS 1970 1 (1) 35 –42
- Kobayshi T et al : ‘Effect of shield gas composition upon the arc temperature during gas shielded arc welding’. J Jpn Weld Soc 1970 39 (8) 785 –791.
- Kobayashi T et al : ‘Effects of welding atmosphere and welding polarity upon the nitrogen content of the weld metal – Fundamental study on nitrogen absorption by Fe–Cr–Ni weld metal (Report 1)’. J Jpn Weld Soc 1971 40 (3) 221 –231.
- Kobayashi et al : ‘Nitrogen content of Fe–Cr and Fe–Ni binary weld metal – Fundamental study on nitrogen absorption by Fe–Cr–Ni weld metal (Report 2)’. J Jpn Weld Soc 1971 40 (4) 297 –306.
- Kobayashi et al : ‘Nitrogen content of Fe–Cr–Ni ternary weld metal – Fundamental study on nitrogen absorption by Fe–Cr–Ni weld metal (Report 3)’. J Jpn Weld Soc 1971 40 (5) 448 –458.
- Kobayashi et al : ‘Effects of alloying elements upon nitrogen content of weld metal (Report 1) – For nitrogen atmosphere’. J Jpn Weld Soc 1972 41 (3) 308 –321.
- Kobayashi et al : ‘Effects of alloying elements upon nitrogen content of weld metal (Report 2) – For air atmosphere’. J Jpn Weld Soc 1972 41 (4) 415 –424.
- Kobayashi et al : ‘Nitrogen content of Ni base Ni–Fe, Ni–Cr and Ni–Fe–Cr alloy weld metal’. J Jpn Weld Soc 1972 41 (5) 564 –569.
- Kobayashi et al : ‘Effects of atmospheric pressure upon nitrogen content of mild steel weld metal’. J Jpn Weld Soc 1973 42 (7) 714 –719.
- Enjo T et al : ‘Gas shielded arc welding of high–nitrogen austenitic stainless steel (Report 1)’. Trans. JWRI 1980 9 (2) 31 –38.
- Kobayashi et al : ‘High temperature mechanical properties of high nitrogen SUS316 austenitic stainless steel weld metal – Gas shielded arc welding of high nitrogen SUS316 austenitic stainless steel (Report 1)’. J High Tem Soc 1981 7 (1) 27 –34.
- Kobayashi et al : ‘Low temperature mechanical properties of high nitrogen SUS316 austenitic stainless steel weld metal – Gas shielded arc welding of high nitrogen SUS316 austenitic stainless steel (Report 2)’. J High Temp Soc 1981 7 (2) 72 –79.
- Kobayashi T et al : ‘Low temperature mechanical properties of high-nitrogen type 316 austenitic stainless steel weld metals – Gas shielded arc welding of high-nitrogen type 316 austenitic stainless steel (Report 2)’. Trans. JWRI 1981 10 (1) 55 –62.
- Kobayashi et al : ‘Effects of nitrogen and hydrogen addition upon shield gas during plasma arc welding’. J High Temp Soc 1981 7 (2) 80 –88.
- Kuwana T and Kokawa H: ‘Nitrogen absorption by iron weld metal during non-consumable electrode type arc welding’. Q J Jpn Weld Soc 1983 1 (3) 392 –398.
- Kuwana T et al : ‘Nitrogen absorption by stainless steel weld metal during non-consumable electrode type arc welding’. Q J Jpn Weld Soc 1984 2 (4) 669 –675.
- Kuwana T et al : ‘Nitrogen absorption by pure iron weld metal in high pressure welding atmosphere – Nitrogen absorption by weld metal under high pressure (Report 1)’. Q J Jpn Weld Soc 1985 3 (4) 737 –744.
- Kuwana T et al : ‘Nitrogen absorption by stainless steel weld metal in a high pressure welding atmosphere – Nitrogen absorption by weld metal under high pressure (Report 2)’. Q J Jpn Weld Soc 1985 3 (4) 744 –751.
- Kuwana T et al : ‘Effect of nitrogen upon transmission electron microstructure of SUS304 L stainless steel weld metal’. J Jpn Weld Soc 1986 4 (3) 520 –526.
- Kuwana T and Kokawa H: ‘Nitrogen absorption by iron and stainless steel molten metal during arc melting’. Q J Jpn Weld Soc 1987 5 (4) 497 –503.
- Kuwana T et al : ‘Nitrogen absorption by Fe–Cr and Fe–Ni binary molten alloy during arc melting’. Q J Jpn Weld Soc 1988 6 (3) 388 –394.
- Kuwana T et al : ‘Nitrogen absorption by Fe–Cr and Fe–Ni binary weld metal during non-consumable electrode type arc welding’. Q J Jpn Weld Soc 1989 7 (2) 169 –175.
- Kuwana T: ‘The oxygen and nitrogen absorption of iron weld metal during arc welding’. Proc. IIW Congress on Joining Research, Advanced Joining Technologies , Ed. T H North, Montreal, Canada, Chapman & Hall, London 1990 117–128.
- Kuwana T et al : ‘Nitrogen absorption by Fe–Cr–Ni ternary weld metal during non-consumable electrode type arc welding’. Q J Jpn Weld Soc 1992 10 (3) 403 –409.
- Kokawa H et al : ‘Nitrogen absorption by duplex stainless steel weld metal and microstructure’. Q J Jpn Weld Soc 1992 10 (4) 496 –502.
- Kokawa H et al : ‘Effect of nitrogen upon tensile properties of duplex stainless steel weld metal’. Q J Jpn Weld Soc 1993 11 (4) 531 –537.
- Kokawa H et al : ‘Effect of nitrogen upon toughness of duplex stainless steel weld metal’. Q J Jpn Weld Soc 1994 12 (3) 404 –410.
- Kuwana et al : ‘Quantitative prediction of nitrogen of steel weld metal during non-consumable electrode type arc welding’. J High Temp Soc 1995 21 (1) 16 –25.
- Kuwana T et al : ‘Quantative prediction of nitrogen absorption by steel during gas tungsten arc welding’. Mathematical modelling of weld phenomena 3, Ed. H Cerjak, The Institute of Materials, London 1997 64–81.
- Kokawa H: ‘Quantitative prediction of gas absorption during arc welding process – Nitrogen absorption – Construction of prediction theory in various joining fabrication’. Osaka University Joining Science Research Laboratory Kuroki Shuppan 1997 59–66.
- Enjo T et al : ‘Low Temperature mechanical properties of high nitrogen SUS304 austenitic stainless steel weld metal’. J Jpn Weld Soc 1982 1 (2) 271 –279.
- Enjo T et al : ‘Effects of nitrogen upon microstructure and low temperature impact properties of 304 austenitic stainless steel weld metal using the SMAW process’. J Jpn Weld Soc 1986 4 (1) 759 –765.
- Kikuchi Y et al : ‘Denitrification during the electron beam welding process of SUS304 LN steel’. J High Temp Soc 1990 16 (1) 33 –43.
- Kikuchi Y et al : ‘Nitrogen absorption and solidification zone characteristics of SUS316 LN stainless steel molten metal in a high pressure nitrogen arc’. J High Temp Soc 1992 18 (4) 177 –186.
- Kikuchi Y et al : ‘Nitrogen content of 316L weld metal and its fine particles by means of high-pressure MIG arc welding’. ISIJ Intern 1996 36 (7) 977 –982.
- Inagaki M et al : ‘Dissolved nitrogen content in molten iron during arc welding’. J Jpn Weld Soc 1965 34 (3) 322 –329.
- Inagaki M et al : ‘Dissolved nitrogen content in molten iron during arc welding’. J Jpn Weld Soc 1965 34 (3) 322 –329.
- Uda M and Ono S: ‘Effect of surface active ingredients upon dissolved nitrogen content (molten iron) during arc melting’. J Jpn Weld Soc 1972 41 (7) 772 –780.
- Uda M and Ono S: ‘Dissolved nitrogen content in Fe–Ta, Fe–Ni, Fe–Co and Fe–Si binary alloy during arc melting’. J Jpn Weld Soc 1974 43 (5) 426 –433.
- Uda M and Ono S: ‘Spattering phenomenon from the viewpoint of chemical metallurgy – Fe–N group’. J Jpn Weld Soc 1975 44 (10) 799 –806.
- ‘Nitrogen in arc welding – a review’. WRC Bulletin 369 1 –179.
- Okagawa R K et al : ‘The influence of nitrogen from welding on stainless steel weld metal microstructures’. Weld J 1983 62 (8) 204s –209s.
- Bandopadhyay A et al : ‘Nitrogen activity determination in plasma’. Metall Trans B 1992 23 (8) 207 –214.
- Mundra K and DebRoy T: ‘A general model for partitioning of gases between a metal and its plasma environment’. Metall Trans B 1995 26 (2) 149 –157.
- Palmer T A and DebRoy T: ‘Physical modelling of nitrogen partition between the weld metal and its plasma environment’. Weld J 1996 75 (7) 197s –207s.
- Palmer T A et al : ‘Nitrogen dissolution in the weld metal – Current status and research opportunities’. Mathematical Modelling of Weld Phenomena 3, Ed. H Cerjak, The Institute of Materials, London 1997 3–40.
- Palmer T A and DebRoy T: ‘Enhanced dissolution of nitrogen during gas tungsten arc welding of steels’. Sci Technol Weld Join 1998 3 (4) 190 –203.
- Pitscheneder W et al : ‘Numerical and experimental investigation of conduction-mode laser weld pools’. Mathematical Modelling of Weld Phenomena 3, Ed. H Cerjak, The Institute of Materials, London 1997 41–63.
- Kokawa H: ‘ Modelling on gas absorption behaviour of weld metal – Modelling and simulation of material behaviour at weld zone’. Compiled by the Welding Metallurgy Research Committee of the Japan Welding Society JWS Bulletin 1999 14 192–202.
- Pehlke R D and Elliott J F: ‘Solubility of nitrogen in liquid iron alloys.’ Thermodynamics Trans, AIME 1960 218 (12) 1088 –1101.
- Turkdogan E T and Ignatowicz S: ‘The solubility of nitrogen in iron–chromium alloys’. JISI 1958 188 (3) 242 –247.
- Okamoto S et al : ‘Smelting of high Cr steel under high pressure nitrogen and heat resisting characteristics of 316L steel’. Tetsu To Hagane 1962 48 (2) 123–133.
- Wada H and Pehlke R D: ‘Solubility of nitrogen in liquid Fe–Cr–Ni alloys containing manganese and molybdenum’. Metall Trans B 1977 8 (12) 675 –682.
- Ogawa M et al : ‘Blowhole control of high nitrogen stainless steel weld metal and evaluation of solidification mode and corrosion resistance – Study on high nitrogen stainless steel welded joint characteristics (Report 1)’. Q J Jpn Weld Soc 2002 20 (1) 96 –105.
- Kokawa H et al : ‘Behaviour of nitrogen in high strength stainless steel JJ1 weld metal’. The 51st Annual Assembly of the International Institue of Welding in Hamburg 1998 IIW Doc.IX-1908-98 1-10.
- Dong W et al : ‘Nitrogen absorption by iron and stainless steels during CO 2 laser welding’. Metall Mater Trans B 2003 34 - 1 75 –82.
- Sato Y et al : ‘Nitrogen absorption by iron and stainless steels during YAG laser welding’. ISIJ Internal 40 Suppl 2000 S20 –24.
- Dong W et al : ‘ Mechanism governing nitrogen absorption by steel weld metal during laser welding’. Paper for publication.
- Dong W et al : ‘Mechanism of nitrogen absorption of steel weld metal during laser welding’. Proc. 7WS Today and Tomorrow in Science and Technology of Welding and Joining JWS 2001 2 845 –850.
- Dong W et al : ‘Nitrogen desorption of high nitrogen stainless steels during CO 2 laser welding’. Paper for publication.
- Kokawa H: ‘Nitrogen absorption and desorption by steel weld metal during laser welding’. Mini Special Edition ‘Manifestation of nitrogen added steel properties and new developments’. Forum 2002 7 (11) 862–863.
- Kokawa H: ‘Nitrogen absorption by iron and stainless steel during laser welding process’. J Laser Processing Soc 2002 9 (3) 236 –240.
- Miyazaki Y et al : ‘Phenomenon of porosity occurrence during steel sheet CO 2 laser welding’. Q J Jpn Weld Soc 2001 19 (2) 241 –251.
- Nishimoto K and Mori H: ‘Effect of solidification mode upon high temperature crack sensitivity of high nitrogen stainless steel laser weld metal’. The 164th Welding Metallurgy Research Committee Data 2001 WM–1789–01.