Minimising the probability of formation of external defects in welded joints in the process of automatic orbital welding

References

• Zubchenko A S et al : ‘Reliability and service life of welded structures in atomic power plant’. Avt Svarka 1997 ( 11 ) 3 –10.
   Google Scholar
• Poloskov S I et al : ‘Special features of controlling the formation of the weld root in orbital welding of non-rotating joints in pipes’. Svar Proiz 2003 ( 4 ) 3 –10.
   Google Scholar
• Poloskov S I et al : ‘Special features of the process of filling the gap (deposit) in automatic orbital welding of non-rotating joints in pipes’. Svar Proiz 2003 ( 8 ) 3 –11.
   Google Scholar
• Gul'nyashkin V N et al : ‘Effect of lack of fusion and undercutting on the stress’. Avt Svarka 1980 ( 8 ) 14 –16,29.
   Google Scholar
• Tararychkin I A: ‘Statistical methods of ensuring the required quality of products in welding production’. University Lugansk 2002 .
   Google Scholar
• Mandel'berg S P et al : ‘Selecting the conditions of arc welding’. Avt Svarka 1984 ( 12 ) 57 –60.
   Google Scholar
• Bozhenko B P and Fogel' V: ‘Special features of formation of the weld at high welding speeds’. Svar Proiz 1983 ( 9 ) 10 –12.
   Google Scholar
• Chernyshov G G and Kovtun V L: ‘Effect of the heat flow and arc pressure on the maximum welding speed’. Svar Proiz 1985 ( 2 ) 14 –15.
   Google Scholar
• Poloskov S I et al : ‘Effect of thermal characteristics of the stabilised arc on the quality of welded joints in Al alloys’. Vopr. Atomnoi Nauki Tekhniki Ser. Yadernaya Tekhnika i Tekhnologiya 1989 ( 4 ) 35 –38.
   Google Scholar
• Berezovsky B M: ‘Wetting and spreading of the liquid pool on the surface of metal’. Avt Svarka 1983 ( 10 ) 31 –34.
   Google Scholar
• Erokhin A A et al : ‘Effect of the tip angle of a tungsten electrode on the formation of undercutting and gas cavities in welding’. Svar Proiz 1972 ( 5 ) 20 –21.
   Google Scholar
• Poloskov et al : ‘Special features of controlled heat and mass transfer in non-consumable electrode welding with short circuiting of the gap’. Svar Proiz 2002 ( 7 ) 6 –13.
   Google Scholar
• Razmyshlyaev A D: ‘Control of the geometrical dimensions of the weld in arc welding and surfacing by the effect of magnetic fields (review)’. Svar Proiz 1994 ( 9 ) 28 –31.
   Google Scholar
• Nikolaenko M R et al : ‘Special features of the effect of welding conditions with strip and wire electrodes on the dimensions and properties of welded joints’. Svar Proiz 1980 ( 11 ) 20 –21.
   Google Scholar
• Potekhin V P: ‘The role of arc pressure in the formation of undercutting’. Svar Proiz 1986 ( 6 ) 12 –13.
   Google Scholar
• Boldyrev A M et al : ‘Calculating the hydrodynamic characteristics of liquid metal on the bottom of the weld pool in arc welding’. Svar Proiz 1992 ( 2 ) 31 –33.
   Google Scholar
• Tytkin Yu M et al : ‘Mechanism of formation of a rough surface of weld metal under forced condition’. Svar Proiz 1982 ( 2 ) 4 –5.
   Google Scholar
• Ishchenko Yu S and Bukarov V A: ‘Mechanisms of formation of main types of defects in welding and methods for removing them’. Ser. Yadernaya Tekhnika i Tekhnologiya 1986 2 (17) 27 –33.
   Google Scholar
• Slavin G A et al : ‘Some special features of solidification of the liquid metal of the pool in TIG pulsed arc welding’. Svar Proiz 1973 ( 6 ) 7 –9.
   Google Scholar
• Ishchenko Yu S et al : ‘Displacement of the solid phase in the weld pool after interrupting heat supply’. Svar Proiz 1986 ( 10 ) 35 –37.
   Google Scholar
• Poloskov S I et al : ‘Analysis of factors determining the formation of the weld pool in orbital welding of non-rotating joints in pipes (review)’. Svar Proiz 2003 ( 2 ) 11 –19.
   Google Scholar
• Mirlin G A et al : ‘Automatic consumable electrode arc welding using a device for preventing crater formation’. Svar Proiz 1978 ( 3 ) 7 –19.
   Google Scholar
• Poloskov S I et al : ‘Optimisation of the dimensions of working zones for machining and welding of pipelines’. Vol.3. Tr. NIKIMT. IzdAT Moscow 2003 .
   Google Scholar
• Roshchin V V et al : ‘Automatic welding of non-rotating joints in pipes with remote control’. 1971 ( 1 ) 44 –53. Tr. NIKIMT 1971.
   Google Scholar
• Shergov I V et al : ‘Visual–optical panoramic control of the quality of welded joints in argon-arc welding’. Svar Proiz 1986 ( 2 ) 9 –11.
   Google Scholar
• Grinenko V I et al : ‘Experience at NIKIMT with the development of equipment for orbital welding in field conditions’. Vol.2. Tr. NIKIMT. IzdAT Moscow 2002 .
   Google Scholar
• Erofeev V A: ‘Solving problems of optimisation of technology on the basis of computer modelling of the welding process’. Svar Proiz 2003 ( 7 ) 19 –26.
   Google Scholar