Analysis of bending deformation behaviour during circumferential welding of cylindrical parts: study of deformation behaviour at micron to sub-micron level of laser-welded automotive parts

References

• Kojima F: ‘Current status and future perspective of parts processing technologies in Denso’. Denso Tech Rev 2001 6 (2) 11 –19.
   Google Scholar
• Terai K: ‘Study of welding distortion prevention in thin-plate structures’. Kawasaki Tech Rev 1978 61 61 –78.
   Google Scholar
• Kitagawa A et al : ‘Vacuum clamping method to eliminate welding deformation during welding of thin aluminium alloy plate’. J Jpn Weld Soc 1996 59 (201) 118 –119.
   Google Scholar
• Okumoto Y: ‘Angular distortion of steel plate during fillet welding’. Bull Seibu Soc Shipbrs 1988 97 167 –175.
   Google Scholar
• Okada T: ‘Effect of convergent gas flame in point heating/rapid cooling strain relief method for thin-plate structures’. J Jpn Weld Soc 1977 46 (4) 202 –207.
   Google Scholar
• Nakatani M et al : ‘Study of welding deformation estimation method and welding residual stress for stainless steel’. Proc Welded Structures Symposium 2002 99–106.
   Google Scholar
• Cole D Q: ‘Development of techniques for controlling warpage and residual stresses in welded structures’. Final Report NAS8-21174, Harvey Engineering Laboratories 1968.
   Google Scholar
• Kim Y C et al : ‘Prevention of out-of-plane deformation generated by fillet welding’. J Steel Construction Engng 1999 6 (22) 11 –16.
   Google Scholar
• Watanabe M: ‘Study of residual stress reduction in welded joints by local low-temperature cooling’. J Jpn Weld Soc 1983 ( 33 ) 308 –309.
   Google Scholar
• Guan Q et al : ‘Dynamic control of welding distortion by moving spot heat sink’. Weld World 1994 34 (4) 308 –312.
   Google Scholar
• Mochizuki M et al : ‘Improvement of fatigue strength through residual stress reduction by controlling the welding pass sequence’. Trans Jpn Soc Mech Engng (Series A) 1998 64 (626) 2514 –2520.
   Google Scholar
• Mochizuki M et al : ‘Simplified analysis of welding residual stress in box fabricated with multiple welded joints’. Trans Jpn Soc Mech Engng (Series A) 1999 65 (633) 989 –995.
   Google Scholar
• Tsai C L et al : ‘Welding distortion of a thin-plate panel structure – The effect of welding sequence on panel distortion is evaluated’. Weld J 1999 78 (5) 156s –165s.
   Google Scholar
• Fujita Y et al : ‘Studies of thermal elastic–plastic problems (4 th report) – Welding deformations and residual stresses due to circumferential welds in cylindrical shells’. J Soc Nav Arch Jpn 1979 (146) 383 –392.
   Google Scholar
• Sato K et al : ‘Stresses and deformations arising from uniform inherent strains in thin-walled pipes’. J Jpn Weld Soc 1982 51 (2) 142 –148.
   Google Scholar
• Sato K et al : ‘Residual stresses and deformations in thin cylindrical shells due to circumferential welds’. J Jpn Weld Soc 1983 52 (2) 83 –90.
   Google Scholar
• Sato K et al : ‘Residual stresses and deformations in thin cylindrical shells due to longitudinal welds’. J Jpn Weld Soc 1983 52 (2) 58 –65.
   Google Scholar
• Togi M et al : ‘Development of distortion-reducing process for stab welding of boiler header’. Kawasaki Heavy Industries Tech Rep 1986 ( 94 ) 1–8.
   Google Scholar
• Nanba N et al : ‘Study of estimation method for welding distortion in cylinder using inherent strain’. Mitsubishi Heavy Industries Tech Rep 1986 23 (1) 5–9.
   Google Scholar
• Nomoto T and Terasaki T: ‘Prediction of welding stress and residual deformation generated by pipe welding through the medium of inherent strain’. Trans Jpn Soc Mech Engng (Series A) 2000 66 (642) 168 –175.
   Google Scholar
• Nikkei Gijutsu Tosho KK: ‘Laser processing’. 1990.
   Google Scholar
• Mochizuki M: ‘Studies of residual stress analysis in welded structures and their application to strength evaluation’. Doctoral dissertation, Kyoto University 1997.
   Google Scholar