References
- Nilsson J O et al : ‘Secondary aust.enite formation and its relation to pitting corrosion in duplex stainless steel weld metals.’ Materials Science and Tec nology 1995 11 ( 3 ).
- Przetakjewjcz W and Tomczak R: ‘Some aspects of the weldability of ferrito–austenitic duplex and superduplex grades of steel.’ Przeglad Spawalnictwa 1995 ( 3 ).
- Kim T S and Kwon H S: ‘Effects of tungsten on corrosion and kinetics of sigma phase formation in 25% chromium duplex steels.’ Corrosion 1999 55 .
- Lee V H et al : ‘Effects of the W substitution on sigma and chi phase precipitations and toughness in duplex stainless steels.’ Materials Science and Technology 1998 ( 8 ).
- Hilders 0 A et al : ‘Effect of 475°C embrittlement on fractal behaviour and tensile properties of a duplex stainless steel.’ Journal of Materials Engineering and Performance 1999 8 ( 2 ).
- Karlsson L et al : ‘Precipitation of intermetallic phase in 22% Cr stainless weld metals, The kinetics of intermetallic phase formation in the 675–1000 °C (1274–1832 °F) temperature range, and effects on the mechanical properties and corrosion resistance.’ Welding Research Supplement Jan 1995 .
- Karlsson L: ‘Intermetallic phase precipitation in duplex stainless steels and weld metals: metallurgy, influence on properties, welding and testing aspects.’ Welding Research Council Bulletin 1999 438 .
- ‘URANUS 45 – forming and welding procedures.’ Creusot–Loire Industrie Catalog 1997.
- Nilsson J O et al : ‘The formation and effect of secondary austenite in duplex and superduplex stainless steel weld metal.’ Proc conf ‘Processes & Materials, Innovation stainless steel ‘93’ Florence, 1999.
- Nilsson J O: ‘Superduplex stainless steels.’ Materials Science and Technology 1992 8 ( 8 ).
- Meka K: ‘Effect of nitrogen in the GMA welding–arc gas mixture on the quality of joints in duplex steel.’ PhD Thesis, Gliwice, 1999.
- Lukojc A and Nowacki J: ‘Secondary austenite in the heat affected zone of joints welded in duplex steel.’ Proc conf ‘Polish metallurgy in the years 1998–2002’ Krynica, Metallurgy Committee PAN, 2002.
- Jimenez J A et al : ‘High temperature mechanical behaviour of delta–gamma stainless steel.’ Materials Science and Technology 1999 15 ( 2 ).
- ASTM G48A Standard Test method for pitting and crevice corrosion resistance of stainless steel and related alloys by use of ferric chloride solution.