Distribution of temperature and voltage drop in the extension of a consumable electrode in welding with constant and pulsed current

References

• Paton B E: ‘Examination of the pulses of heating the electrode in automatic submerged-arc welding’. Studies in automatic submerged-arc welding 1948 ( 3 ) 13 –28.
   Google Scholar
• Vasil'ev E M et al : ‘Determination of the temperature field in the electrode extension’. Trudy LPI 1974 ( 336 ) 67 –70.
   Google Scholar
• Halmoy E: ‘Wire melting rate droplet temperature and effective anode melting potential’. Paper 29. Arc Physics and Weld Pool Behaviour, International Conference, London, 1979.
   Google Scholar
• Waszin J H and van den Heuvel G J P M: ‘Measurements and calculations of the resistance of the wire extension in arc welding’. Paper 12, Arc Physics and Weld Pool Behaviour, International Conference, London, 1979. Preprints Abington, 1979.
   Google Scholar
• Waszink J H and van den Heuvel G J P M: ‘Heat generation and heat flow in the filler metal in GMA welding’. Welding Journal 1982 ( 2 ) 269 –282.
   Google Scholar
• Lancaster J F: ‘The physics of welding’. Publ Pergamon Press, 1986.
   Google Scholar
• Kim Y –S et al : ‘Analyses of electrode heat transfer in gas metal arc welding’. Welding Journal 1991 ( 1 ) 20 –31.
   Google Scholar
• Hirata Y: ‘Physics of welding (III) – Melting rate and temperature distribution of electrode wire’. Welding International 1995 ( 5 ) 348 –351.
   Google Scholar
• Vorontsova L A et al : ‘Heating and melting of the electrode in mechanised arc welding’. Dissertation for the title of doctor of ecosciences, Rostov-on-Don, 1998.
   Google Scholar
• Sudnik V A and Ivanov A V: ‘A mathematical model of the heat source in consumable electrode arc welding in a mixture of shielding gases’. Part 1. The normal process. Svar Proiz 1998 ( 9 ) 3 –9.
   Google Scholar
• Halmoy E and Karkhin V A: ‘Dynamic simulation of aluminium and steel electrode melting in pulsed GMAW’. Welding Conference LUT JOIN'99, Lappeenranta, Finland, 1999.
   Google Scholar
• Johnsson P G et al : ‘Power characteristic in GMAW: experimental and numerical investigation’. Welding Journal 1995 ( 3 ) 93 –102.
   Web of Science ®Google Scholar
• Lenivkin V A and Klenov G G: ‘Distribution of current and contact resistance in a current-contacting guide’. Svar Proiz 1990 ( 9 ) 27 –29.
   Google Scholar
• Huismann G and Hoffmeister H: ‘Reactions of current and metal transfer on unsteady wire transport in MIG welding with respect to hyperbaric conditions’. Trends in Welding Research 1998 295 –300.
   Google Scholar
• Chubukov A A: ‘Resistance at the guide-welding wire contact in carbon dioxide welding’. Svar Proiz 1980 ( 12 ) 31 –32.
   Google Scholar
• Subramaniam S et al : ‘Experimental approach to selection of pulsing parameters in pulsed GMAW’. Welding Journal 1999 ( 5 ) 155 –172.
   Google Scholar
• Rykalin N N: ‘Calculations of thermal processes in welding’. Publ Mashgiz 1951.
   Google Scholar
• Rappas M et al : ‘Application of inverse methods to the estimation of boundary conditions and application of inverse methods to the estimation of boundary conditions and properties’. Modelling of casting, welding and advanced solidification processes VII, 1995.
   Google Scholar
• Vorontsova L A et al : ‘Aluminium and aluminium alloys in electrical engineering components’. Publ Metallurgiya, Moscow, 1971.
   Google Scholar
• Kuntysha V B and Bessonnogo A N (eds): ‘Fundamentals of calculations and design of heat exchanges in air cooling’. Publ Nedra, St Peterburg, 1996.
   Google Scholar
• Karkhin V A et al : ‘Modelling the thermal behaviour of metal of weld and heat-affected zone during pulsed power welding’. Mathematical modelling of weld phenomena 4, The University Press, Cambridge, UK, 1998.
   Google Scholar
• Carslow G S and Eger D: ‘Heat conductivity of solids’. Publ Nauka, Moscow, 1964.
   Google Scholar