References
- Radaj D: ‘Integrated finite element analysis of welding residual stress and distortion’. Numerical Modelling of Weld Phenomena 2002 6 469 –489.
- Devaux J et al : ‘Evaluation of the integrity of PWR bi-metallic welds’. J Pressure Vessel Tech 2000 122 ( 3 ) 368 –373.
- Leblond J B: ‘Etude théorique et numérique de la diffusion de l‘hydrogène dans les aciers’. Doctoral Thesis, University of Paris 6, 1984.
- Goldak J A et al : ‘A new finite element model for welding heat sources’. Metallurgical Transactions 1984 15B 299 –305.
- Karlsson L and Lindgren L-E: ‘Combined heat and stress-strain calculations’. Modelling of Casting, Welding and Advanced Solidification Processes V, (1991) 187–202.
- Denis S: ‘Prévision des contraintes résiduelles induites par traitement thermique et thermochimique’. Revue de Métallurgie – CIT/Science et Génie des matériaux 1997 157–176.
- Johnson W A and Mehl R F: ‘Reaction kinetics in process of nucleation and growth’, Trans. AIME 1939 135 416 –458.
- Avrami M: ‘Kinetics of phase change. I–General theory. II– Transformation–time relations for random distribution of nuclei. III–Granulation, phase change and microstructure’. J Chem Phys 1939 7 1103 –1112; 1940 8 212–224; 1941 9 177–184.
- Koistinen D P and Marbürger R E: ‘A general equation pre-scribing extend of austenite–martensite transformation in pure Fe–C alloys and plain carbon steels’. Acta Met 1959 7 59 .
- Inoue T: ‘Residual stresses and distortions, metallo-thermo-mechanics: Simulation of engineering processes incorporating phase transformations’. Numerical Modelling of Weld Phenomena 1997 7 547 –474.
- Fernandes F M B et al : ‘Numerical model coupling phase transformation and temperature evolution during quenching of steels’. Materials Science and Technology 1985.
- Denis S et al : ‘Modelling of phase transformation kinetics in steels and coupling with heat treatment residual stress predictions’. Proc. of 3 rd European Mechanics of Materials Conf. 1998.
- Leblond J-B and Devaux J-C: ‘A new kinetic model for anisothermal transformation metallurgical transformations in steel including effect of austenite grain size’. Acta Metallurgica 1984 32 ( 1 ) 137 –146.
- Pont D et al : ‘Identification of a kinetic model for anisothermal metallurgical transformations in steels’. Inverse Problems in Engineering Mechanics 1994 151 –156.
- Waeckel F: ‘Une loi de comportement thermométallurgique des aciers pour le calcul méchanique des structures’. Doctoral Thesis, ENSAM (1994).
- Martinez M: ‘Jonction 16MND5-Inconel 690-316LN par soudage diffusion. Elaboration et calcul des contraintes résiduelles de procédé’. Doctoral Thesis, ENSAM, Paris (1999).
- Aubry C et al : ‘Modelling of tempering kinetics for the calculation of heat treatment residual stresses in steels’. Proc. of ICRS-5, Edited by T. Ericsson, M. Oden and A. Andersson, Vol. 1, 412–417 (1997).
- Leblond J B et al : ‘A theoretical and numerical approach to the plastic behavior of steels during phase transformations, I: Derivation of general relations, II: Study of classical plasticity for ideal-plastic phases’. J Mech Phys Solids 1986 34 ( 4 ) 395 –432.
- Greenwood G W and Johnson R H: ‘The deformation of metals under small stresses during phase transformation’. Proc Roy Soc 1965 A 283 403 –422.
- Magee C L: ‘Transformation kinetics, microplasticity and aging of martensite in Fe–31 Ni’. PhD Thesis, Carnegie Institute of Technology, Pittsburgh (USA), (1966).
- Abrassart F: ‘Influence des transformations martensitiques sur les propriétés mécaniques des alliages du système Fe–Ni–Cr– C’. Doctoral Thesis, University of Nancy I (1972).
- Giusti J: ‘Contraintes et déformations résiduelles d‘origine thermique – Application au soudage et à la trempe des aciers’. Doctoral Thesis, University of Paris VI, (1981).
- Berveiller M and Fisher F D: ‘Mechanics of solids with phase change’. CISM Course, 368, Springer, (1997).
- Fischer F D et al : ‘A new view on transformation induced plasticity (TRIP)’. Int J Plasticity 2000 16 723 –748.
- Leblond J B et al : ‘Numerical modelling of transformation plasticity in steels, I: Case of ideal–plastic phases, II: Coupling with strain-hardening phenomena’. Int J Plasticity 1989 5 551 –591.
- Taleb L and Sidoroff F: ‘Transformation induced plasticity due to the Greenwood–Johnson mechanism’. Proc. Plasticity‘02, NEAT Press, 207–209 (2002).
- Bru D et al : ‘Influence of material properties at high temperatures on the modelling of welding residual stress and deformation state’. Numerical Modelling of Weld Phenomena 1996 3 456 –463.
- Cavallo N: ‘Contribution à la valiation expérimentale de modèles décrivant la ZAT lors d‘une opération de soudage’. Doctoral Thesis, INSA, Lyon (1998).
- Vincent Y: ‘Simulation numérique des conséquences métallurgiques et mécaniques induites par une opération de soudage – Acier 16MND5’. Doctoral Thesis, INSA, Lyon (2002).
- Wang Z G and Inoue T: ‘Viscoplastic constitutive relation in-corporating phase transformation – Application to welding’. Materials Sci Technol 1985 1 899 –903.
- Colonna F et al : ‘On thermo-elastic-viscoplastic analysis of cooling processes including phase changes’. J Materials Processing Tech 1992 34 525 –532.
- Videau J C et al : ‘Modélisation des effets mécaniques des transformations de phases pour le calcul des structures’. J Ph IV 1994 4 227 –232.
- Coret M: ‘Etude expérimentale et simulation de la plasticité de transformation et du comportement multiphasé de l‘acier de cuve 16MND5 sous chargement multiaxial anisotherme’. Doctoral Thesis, ENS Cachan (2001).
- Bergheau J M et al : ‘Viscoplastic behavior of steels during welding’. I nt J Plasticity 2002 submitted.
- Lindgren L-E et al : ‘Automatic remeshing for three-dimensional finite element simulation of welding’. Comp Meth Appl Mech Engrg 147 1997 401 –409.
- Bergheau J M et al : ‘Finite element simulation of processes involving moving heat sources. Application to welding and surface treatment’. J. Shanghai Jiaotong University, E-5, 1, 2000 114–122.
- Bergheau J M et al : ‘Three-dimensional simulation of a LASER surface treatment through steady state computation in the heat source comoving frame’. Mechanical Effects of Welding, Springer-Verlag, 1992 85–92.
- Shanghvi J and Michaleris P: ‘Thermo-elastic-plastic finite element analysis of quasi-state processes in eulerian reference frames’. Int J Numer Meth Eng 2002 53 1533 –1556.
- Michaleris P and Debiccari A: ‘Prediction of welding distortion’. Welding Journal 1997 76 ( 4 ) 172 –180.
- Souloumiac B et al : ‘A new local global approach for the modelling of welded steel component distortions’. Numerical Modelling of Weld Phenomena 2002 6 573 –590.
- Vincent Y et al : ‘Thermal, metallurgical and mechanical simulations and experimental validation of the residual stresses in the heat-affected zone’. Numerical Modelling of Weld Phenomena 2002 6 591 –627.
- Tsirkas S A et al : ‘Evaluation of distortions of laser welded shipbuilding parts using a local-global finite element approach’. Science and Technology of Welding and Joining 2002 519–537, under publication.
- Enzinger N: ‘Modelling welding residual stresses with a commercial multipurpose finite element program’. Numerical Modelling of Weld Phenomena 2002 6 519 –537.
- Petit S: ‘Conséquences mécaniques des transformations structurales dans les alliages ferreux’. Doctoral Thesis, INSA Lyon (2000).